similar to: X100P and NTL (ex Cable + Wireless)

I'm looking at using a modem to provide caller ID info on my NTL line following the steps in the article posted by Darren Poulson: http://www.22balmoralroad.net/modules.php?name=Sections&op=viewarticle&artid=1 I was wondering if anybody had experience of using any modems (can be pci/isa/external) with an ntl line (in an ex. Cable & Wireless area if it makes a difference) and

I'm using a macro such that if a call is forwarded to my mobile, I can choose to accept it or not. This is done with the following Dial command: Dial(IAX2/voiptalk/44${ARG1:1},15,trM(screen)ow) and the following macro: [macro-screen] ; Allow called user to accept/reject the call exten => s,1,Wait(0.2) exten => s,2,Read(Accept|loho-support-choose|1) exten =>

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf

Hi, I'm writing a Java client/server application that talks to the Asterisk manager interface via the asterisk-java stuff. The idea being it will give you an app to run on your desktop that monitors your phone essentially. Once I've got something vaguely working it will be released under the GPL and hopefully people will contribute to it etc... As part of this, I'm currently

Dear Group, At the moment I use SJPhone as my soft phone with Asterisk. I prefer the look and feel of the x-ten lite. However, when ever I use my x-ten lite I get a lot of breakup in my communication. E.g. I will play some hold music, and every 5-6 seconds I drop some packets. I don't have the same issue with SJPhone. I'm sure this is a configuration issues, but I can work

Chris you might know the answer to my HUUUUUUGE problem A few weeks ago you posted this message: "I have an ISDN PRI supplied by NTL (ex Diamond Cable, Nottingham) which is currently working happily with an SDX Index phone system. I have to replace this phone system shortly and I've been trying to get a * system working for some weeks now. I have configured the dial plan (which works)

Hi all, I'm currently on an NTL PSTN line, using Asterisk 1.2 and a X101P cheapo card. The problem lies with detecting when the far end has hung up. It fails to detect it, and will only cleardown when the silence timeout has been reached. Now, I've seen the thread at http://www.mail-archive.com/asterisk-users@lists.digium.com/msg32337.html, to which nothing has come of it. That was

When I enable callprogress I get this error message... (when I call, it will ring forever but asterisk is acting as if it DID pick up the line ... but it never did... ) I'm beginning to think that asterisk can't hangup the line when in voice mail and this, whatever action I'll take... Actually, callprogress doesn't seem to work at all... (in my case) Mar 24 23:37:28

Hi everybody, I would like to set asterisk up such that to use the call parking feature, instead of transferring a call to the extension set up in features.conf, you just dial a code (e.g. *3) and this then parks the call. The main reason for this is that a number of the phones I use have transfer buttons that I can't reprogram to use Asterisk's own transfer functions, therefore you

Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that. In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment

Hi All, I've got an MD3200 modem which is working as a Zaptel FXO interface for Asterisk (X100P clone I believe). It seems to work, but on incoming or outgoing calls I can hear the other party ok but when I speak, I hear my voice echo back at me (quite quietly but it's distracting!) on everything I say. The other party doesn't seem to hear the echo - they just say I sound a bit quiet.

Hi, Does anyone know anything about the callerid format that NTL uses here in Cambridge, UK. This is the former Cambridge Cable, who is sometimes different from the rest of NTL. They did say that only some equipment works with their switch. I hoped that they might use US-style CID, which would work with the X100P, but it doesn't seem to come through. I do notice that my DECT phone bought

Hi, I've today received an E100P. Can anyone help me out with the config of this card please. We have an NTL PRI circuit installed with 10 channels active. Also what do the LEDs on the back of the card mean ? Many thanks Jon

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

Hi, I have a load of IAX extensions, which I'm trying to set up a standard macro to dial them, which gives unavailable or busy voicemail if there is no answer or the phone is in use respectively. The macro I have at the moment is: ; std-exten macro, ${ARG1} = Device to call, ${ARG2} = voicemail box [macro-std-exten] ; Call the user for 20 seconds exten => s,1,Dial(${ARG1},20,tr) exten

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

Well I'm slowly learning my way around asterisk although as yet I haven't had the chance to actually hook the system up to an ISDN line. I am going to migrate from an Argent Office setup. My only problem is keeping costs down on the phones. The Argent system is running about 30 POTS phones. Can someone suggest the cheapest option? Should I get some kind of large scale FXS box or would

Advance apologies for the length of this mail; I have an ISDN PRI supplied by NTL (ex Diamond Cable, Nottingham) which is currently working happily with an SDX Index phone system. I have to replace this phone system shortly and I've been trying to get a * system working for some weeks now. I have configured the dial plan (which works) and all my SIP extensions (which all work) along with

Hi all, With the gamut of FXO cards out there, I'm looking for a recommendation for home use. I have a nicely working Asterisk 1.4 system that just requires an FXO card to connect my NTL PSTN to it. My previous X101P clone seems to have kicked the bucket. Any suggestions would be greatly appreciated. Regards Kyle -- Kyle Gordon kyle@lodge.glasgownet.com http://lodge.glasgownet.com

anybody recommend a supplier in the UK for a pri/isdn30 line (other than BT) thanx very much __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com