similar to: Extensions.conf sending calls to Cisco AS5300

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and

I've got problem with connecting asterisk to CCM. Our side has Asterisk system other side CCM , ehrn i dial a number on other side channles created , connections established but nothing happend , just silence , and after some time busy tone. Sides sending ad reciving g711 codec , but we need that sides send and recive g729 (we have licenses) , if in h323 conf i try to : disallow=all ,

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-0000004d == Spawn extension (dialin, 065939191, 2) exited non-zero on

OK, here goes my next problem. I have puchased a DID which I can connect to via SIP I have been given the following details: Username: uka1xxxxxx Password: 1000xxxxxx Server: brxxxx.net:5160 My equipment is Asterisk CVS HEAD on Red Hat EL 3.0 (NO NAT) The other end is a Cisco AS5300 (NO NAT) I can register with the Cisco with no problem. When I dial the DID it sends the call to my asterisk

Hi all, I realize this is OT. I just got a Cisco AS5300, and I need to configure it like such: Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco So calls originate from the Asterisk side (registered users on SIP or just ZAP phones), and they go out H323 or SIP to Cisco, where they go out PRI. I have the Asterisk side sorted :) (either H323 or SIP), I need help in the

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

Hello all, I have a cisco AS5300 which is register with a gatekeeper and a Asterisk server also register with the gatekeeper. PSTN ---->AS5300 ---->Gatekeeper ---->Asterisk I set up a conference room on the Asterisk sever (Room No 1234). I try to call from PSTN to AS5300, The AS5300 will call the Asterisk server through the gatekeeper. I manage to get to the start of the conference

All, I have access to a Cisco AS5300 w/ 4 T-1's and a Cisco 3600 with no boards. I was wondering if it would be possible some how to Have one of these Ciscos in-between our sip phones and the asterisk server so that we could use G729 Codec. Sip Phones (7960's & ATA's) via G729 -->Cisco Gateway-->Asterisk via G711. Any ideas? Has anybody done such an implementation or know

I've done some reviewing of the archives for G729 and H323 experiences. The landscape of that query isn't pretty - lots of pleas for help, and nor do I see too many "answers." I have a pending bid that requires some data before I can implement * on this particular solution. My question is perhaps a slightly differently worded one than has been asked before, but it may be

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Is it possible to terminate calls via SIP on a Cisco AS5300? Did anyone do it? How? Do i need an special IOS version? Ive been trying to compile the OpenH323 channel for the last month, but errors still happens. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi All Any body already setup asteriks call routing to Cisco AS5300 with SIP Server ? i need informations sample config for that, or can show how to route docs . thanks Dirgan --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings, I am attempting to configure an AS5300 to provide a SIP based gateway to the PSTN from Asterisk. I have been unable to identify through the docs how specifically this should be configured in Asterisk and have not been able to get things working through trial and error. I am sure I am missing something fairly obvious here but any guidance (or example cfgs) would be much appreciated.

Hi to all! I have this config, PSTN <--> AS5300 <--> ASTERISK I am using the Cisco as5300 to receive incoming calls and routing them to Asterisk for IVR. When I ran asterisk this is what I get when calling the voicemail demo. *CLI> -- Executing Playback("SIP/-081058b8", "transfer|skip") in new stack -- Executing Macro("SIP/-081058b8",

Hi I have finished the installation of my VoIP basic configuration ... Actually: - All calls from my E1 are received by a Cisco AS5300 and sent to my Asterisk (in G711 by SIP). - All user are connected by SIP to the Asterisk - All calls from User are sent by asterisk to the Cisco AS5300 Now, i want see if i can supply T38 Fax Gateway .... I am search to: - Cisco Receive all

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

Hi folks, The obligatory newbie disclaimer: "Hi, I'm new to Asterisk and I have a couple questions..." OK, now that that's over with: I've just started working for a small CLEC, and I'm trying to sell * to my boss as a replacement for some expensive/inflexible/closed-source software he's been using to provide residential dialtone with for a couple years now.