similar to: Question receiving calls via SIP

Sorry if this comes in twice. Wasn't subscribed first time :-( Anyone help me here...... It worked once :-( I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server.

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

Hello All. I started setting up my Asterisk system yesterday and everything was going well, i have registered with sipphone.com and set-up my Asterisk system to register with sipphone per the sip.conf file below. It was registered perfectly but I could not receive calls so I added in the line "insecure-very" and I then used the Washington DC access number to test and the phone

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

Hey guys, Cal someone help me. I'm register voiceplus DID i try to config fllow example but not work. When i test call to number and debug iax2 in my asterisk not found packet. My iax.conf -------- register => in-xxx:yyy@gw5.voicepulse.com [voicepulse] context = voicepulse-incoming secret=yyy auth=md5 type=friend host=gw5.voicepulse.com ------ extention.conf ---- [voicepulse-incoming]

All, I've almost got my Asterisk PBX setup, but I've having some problems with the VoicePulse IAX trunk. On outbound calls, when dialing a PSTN number through the IAX2 trunk, music on hold (moh, using the m option in the dial command) does not work. The console states that "stop sound" on IAX2 channel. Ring works, but only without the r option. MOH works when trying to dial a

Hello- I'm obviously doing something wrong here in trying to get an inbound DID to work with voicepulse. I have an outbound context set-up for those calls in iax.conf, and the appropriate register in- statement. within extensions.conf I am doing something like this: exten => 212xxxxxxx,1,Dial(SIP/admin,t) (where admin is the phone i am looking to forward to from sip.conf). i'm

Hello: I am new to the list. I am trying to set up asterisk with voicepulse. I have a voicepulse username + password, and SIP DID. When I login to voicepulse, I have this under my devices tab: Devices *Login:* Sysxxxxxxx *Password:* xxxxxxxxxx *Context:* VPWS *Connects to:* gw5.voicepulse.com My question is: Do I need a 2.4.x kernel? Currently I am running Debian/stable stock 2.2.x ? Has

I'm trying to use Jeremy's suggestion of dialling using just the peer name instead of user:pass@peer but I'm running into some really funky issues. It does the same thing with both VoicePulse and another * server I have. [voicepulse] type=peer host=gw5.voicepulse.com trunk=yes user=USERNAME pass=PASSWORD and in my dialplan: Dial(IAX2/voicepulse/${EXTEN:2}@VPWS,90,r) The log shows

I'm able to receive but not make calls with zaptel using an X101P connecting to Asterisk with an Xlite client. My client has context = flat in sip.conf and extensions number 8919 In extensions.conf I've got: [home] ; Line 1 ; exten => 8919,1,Dial(${PHONES1},20,Ttm) exten => 8919,2,Macro(vmessage,${PHONES1VM}) exten => 8919,3,Hangup [outgoing] exten =>

Hi folks - I've recently returned to asterisk after an eighteen month break. I've two sip providers - gradwell in the UK (inbound and outbound) and talklite in the US (outbound only). I've managed to get outbound dialing working but am not receiving any calls from gradwell. I've included my sip.conf and extensions.conf as well as the output from tethereal. When a call is placed

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

Yes, and they are aware of the problem. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jonathan Tew Sent: Monday, February 02, 2004 1:59 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] VoicePulse IAX2 lag Is anyone else noticing high lag on their voicepulse IAX2 connections? We're seeing

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

I have working SIP numbers with broadvoice, and just added a DID from http://connect.voicepulse.com/ . The calls answer, but DTMF is not recognized. With "iax2 debug" active pressing DTMF does nothing. Zilch. Zero. A friend tried a different IAX2 connection, and got the same results. I see the following in the archives: On Fri, 2004-04-09 at 10:12, Robert Jackson wrote: > Hey

I am wondering if there is a way to create a SIP/IAX group of outgoing lines like Zap groups. I am currently using the following method, but would like to use features such as ?g2? that would list all the accounts for a SIP or IAX connection. exten => _1NXXNXXXXXX,1,Dial(SIP/account_name:Password@gw5.voicepulse.com/${EXTEN }) exten =>

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm