similar to: Watchguard Firebox 1000 and Asterisk

We are trying to setup a sip connection behind a Watchguard Firebox 1000 and it is simply put...not working. The ports are all forwarded but the packets are not going out. It is as if the firewall simply ignores SIP packets. Has anyone seen this or have any idea what the issue could be? Watchguard so far has been of zero help. Kerry Garrison Director of Technical Services Tech Data Pros -

Hello, I am trying to use WINE (20050725-r1 on Gentoo Linux) to install/run Watchguard's Firebox Management Software (WFS). The WFS installer uses an installshield installer of course.. I've been looking thru the FAQ, wiki, etc and have found info about DCOM98 needing to be installed. I've tried a bunch of things so far, and here's where I stand: First, I tried getting

I am considering replacing my old checkpoint and watchguard firewalls witha single Linux box using iptables and shorewall. I have two ISP''s (with separate routing tables), two DMZ''s, at least one VPN to a remote office, and a local trusted network. The configuration will look like: +----------------+ | | net0 ----------+ eth1

Has anyone here used Asterisk inside a WatchGuard firewall, talking via the WatchGuard SIP Application Layer Gateway to an outside SIP service? I have a customer doing just that, and I am 100% convinced there is a bug in the ALG regarding the media port number it inserts into the SDP when it rewrites it. However, either they or WatchGuard will not accept there is a bug, despite my very detailed

Trouble getting chan_sip2 to compile below is what I have done -download acl.c.patch,acl.h.patch,chan2s_sip.c to /root/software cp /root/software/chan_sip2s.c /usr/src/asterisk/channels cd /usr/src/asterisk/ patch -p0 acl.c /root/software/acl.c.patch cd /usr/src/asterisk/include/asterisk patch -p0 acl.h /root/software/acl.h.patch - added the follow to /usr/src/asterisk/channels/Makefile

I'm behind a watchdog firebox, which has recently blocked ssh out. I have it to where i can use port 21(the server forwards 21 to 22 that i am trying to connect to), but somehow the watchdog firewall is also blocking by protocol type? the only way i can connect is if i choose raw protocol in putty... and this is what i get SSH-1.99-OpenSSH_3.5p1 test Protocol

I am trying to install the WatchGuard VPN client that works on my WinXP system on to Ubuntu 7.04 Feisty Fawn. Here are the errors that happen half way thru the install. tfrench at tfrench-desktop:~$ winefile fixme:rpc:alloc_serverprotoseq protseq "mswmsg" not supported fixme:rpc:I_RpcServerStopListening (): stub fixme:rpc:I_RpcWindowProc (0x20054,00000002,00000000,00000000): stub

/usr/sfw/bin/firefox is a shell script which calls run-mozilla.sh which calls firebox-bin. Is there a way to call dapptrace on firefox in order to trace firefox-bin? This message posted from opensolaris.org

Hello list. I have new server on CentOS 4.1 - fresh installation. During security tests I've noticed: When I scan server ports (nmap) from the outside there is 21 tcp port open. But when I check on the server (netstat -tan or lsof -i) there is no any open 21 tcp port. Any ideas? To be honest I'm confused. Regards P.S.: of course I don't have started FTP service. Even I don't

Using the following defnitions with a C7960: exten => 3001,1,Dial(SIP/3001,15,r) exten => 3001,2,Voicemail2(u3001) exten => 3001,102,Voicemail2(b3001) exten => 3001,103,Hangup If someone is on this phone (real conversation) and another call comes in, the second call goes through the 15 second timeout and is dropped into the 2-priority as "unavailable" (not the 102 busy as

Hi, We have a 256 kbits/s (kilobits per second) link to the internet. it is a router running Linux that belongs to our ISP. They have given us 8 internet ips. (i.e- subnet is 255.255.255.248). one has been given to this router. I have given another internet ip to the firewall running CentOS 4.5. iptables is running on it. And also, I have installed iproute2 pkg as well. pls see below for

Hi Timo/everyone, Currently we are logging the remote IP, but is there a way to show the IP address that the NAT connection is coming from? The reason I ask is, we are changing ISPs, and I would like to see in the logs when an external connection is coming from our OLD ISP connection, and when it is coming through our new one. We have a Watchguard firewall, and I have both External

Our setup: server running shorewal 4.5.2.2 and watchguard vpn appliance. VPN appliance was supplied by our document flow provider. I want to route traffic to 192.168.2.0/24 via 10.10.10.1 gateway. So I thought it would be a good idea to set it up as another ISP in the providers file. But when I enable it I can reach 192.168.2.0/24 subnet but not internet. Can you please tell what I am doing

I have been playing with asterisk for a couple of weeks now and I have been very happy with its performance. However, I have run into a problem with how I want to deploy this solution. I have a mix of softphones (SJ and Xlite), ATA's, and a couple of IP phones (Snom 190). The asterisk box is on the public network. For my primary users they will reside behind a watchguard 4500 firewall.

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

pstn -> sip gw -> * -> C7960 When I dial into * via the pstn, I hear the ivr menu just fine (good quality). I press 3000 (valid extn), and I begin to hear ringing however the ring back is very very choppy. I answer the C7960, and speech is clear in both directions. Place the C7960 extn on hold, and the MOH is very choppy. Checking 'sip show channels' indicates both the sip gw

https://bugzilla.netfilter.org/show_bug.cgi?id=982 Bug ID: 982 Summary: vfork() in xtables.c can corrupt stack Product: iptables Version: 1.4.x Hardware: x86_64 OS: other Status: NEW Severity: normal Priority: P5 Component: iptables-restore Assignee: netfilter-buglog at

NO AGENCIES PLEASE With that out the way, we (http://www.firebox.com) are looking for a web developer to join our existing small development team. Here''s the posting from our website[1]: ==== Web Developer (ref W200) Reporting to: Technical Director This permanent, full-time role involves developing the Firebox website and internal admin tools. You will be working in a small team on

(Apologies to those Toronto Asterisk Users' Group folks who have seen this message... I figured I'd have more success with a wider audience) I'm trying to boot a Cisco 7960 from an ISC DHCPD server (3.0.3 on FreeBSD 4.11), so far unsuccessful, and getting some odd behaviour on the wire. I wonder if anyone has done this before and therefore can validate whether or not the traffic I am

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|