similar to: x100p dropping incoming calls

Hi all, I have an installation where each user on subnet 192.168.1.0/24 is connected via a multiplexer. The problem is that if any client uses more than about 48Kb/s, the multiplexer crashes. I need to limit each client to under this rate, say 32Kb/s. I have seen examples on creating a class per host but is there a simple way of saying "any host from 192.168.1.0/24" so I dont have

Well I'm slowly learning my way around asterisk although as yet I haven't had the chance to actually hook the system up to an ISDN line. I am going to migrate from an Argent Office setup. My only problem is keeping costs down on the phones. The Argent system is running about 30 POTS phones. Can someone suggest the cheapest option? Should I get some kind of large scale FXS box or would

Hi All, I would like to set up a samba server but using the same user / pass for unix logins and smb logins. This works fine if I use non-encrypted passwords but I have to apply the registry patch to set my win98 clients to use non-encrypted passwords. Could I use pam_smb to authenticate the Linux box against its own smb server then use encrypted smb passwords? I understand that if the smb

For people who are using GS 101, what do you think the sidetone generated by the phone. I find mind a bit annoying. It has a delay and you notice it as an echo. The volume of the sidetone is also quite hight. I am distracted when both caller and called party talking over each other occasssionally. The volume of the sidetone can be turned down using the volume button but it also control the

Chris Albertson wrote: |What firmware version do you have? program version 1.0.4.39 -- David Kwok Iaxtel/FWD # 17001813482 ext 1002 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 1878 bytes Desc: S/MIME Cryptographic Signature Url :

To those of you who may be interested, to get SATA drives to work on this motherboard with Xen 3.3.1 (compiled from source) you need to set SATA to RAID mode in the BIOS, not the default IDE mode. So I can only assume that the 2.6.18.8 kernel has a problem with the VIA SATA in IDE mode, and can''t recognise it, even though the host OS (Ubuntu 8.04LTS, in my case) has no problems with it.

Just got GS 101 phone and plugged into the network. Got ip setup however, the following problems arise: 1. when dialing an extension, I cannot further send any key tone to Asterisk. 2. there is no sound coming from the other end. I have a sip.conf setup for GS: [General] disallow=all allow=ulaw allow=alaw [gs] canreinvite=no dtmfmode=info In the GS101 setting rtp port = 5004 sip port = 5060

In relation to voice degradation when having 2 or more connection to Asterisk. The comment on the network setup is quite possible. I am not too familiar with linux. How do I check whether the asterisk server's nic is running at full-duplex mode. Does Asterisk use the sound card on the box to do voice processing? I am running xlite on 2 pc and making calls through iax, FWD and back to my

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

I have just checked the Openbsd box on the if interface. fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 address: 00:02:55:30:54:28 media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::202:55ff:fe30:5428%fxp0 prefixlen 64 scopeid 0x1 xl0:

On Thu, 2004-01-15 at 19:18, dkwok@iware.com.au wrote: >> I do not have any zaptel hardware on the Asterisk box, I could not have >> meetme functioning. I did modify the Makefile in zaptel directory on >> line 168 by including ztdummy as one of the modules to compile in. try modprobe ztdummy This works. Should I include this in /etc/asterisk/modules.conf so that it will

My ADSL connection speed is 512Kb up and 128Kb down. When making calls from Asterisk to IAX and back to the Asterisk, the sound is choppy and 20% of voice messages was lost. What is the production bandwidth requirement per internet call. I understand there is no guarantee of QoS but at least a benchmark to follow. -- David Kwok Iaxtel/FWD # 17001813482 -------------- next part

Does any one regularly reboot GS101? It sometimes lost registration with * and needs to be reboot. What is the best way to do it by cron? David Kwok

Snom 200 has be set up with extended key pad. The product literature also mention multiple sip registration. How many registration can it handle? It does not seem to appear in the user manual. David Kwok

I do not have any zaptel hardware on the Asterisk box, I could not have meetme functioning. I did modify the Makefile in zaptel directory on line 168 by including ztdummy as one of the modules to compile in. The error message from the concole: -- Executing MeetMe("SIP/1002-e9ca", "4700") in new stack == Parsing '/etc/asterisk/meetme.conf': Found

I am running v2.0.7 and have set up a network drive for an accounting ledger system. The software is called MYOB and is quite popular in Australia. This is the first time I have to deal with multi user access to 1 data file. My setup is: Global oplocks = yes socket options = TCP_NODELAY socket options = IPTOS_LOWDELAY [MYOB] path=/home/office/MYOB force group = office directory mask = 0770

Referring to my previous post about degradation of voice quality when having more than 2 connection. The actual route is: pc xlite -> local asterisk box -> iaxtel -> local asterisk I have tried out a different situation: pc xlite -> local asterisk box -> iaxtel and the second connection pc xlite -> local asterisk box -> iaxtel -> local asterisk The same degradation

I'm trying to clean up some notices/warnings that are repeatedly logged in *.Any Help would be appreciated as I'm not sure of the cause /solution. Here are the errors: Nov 17 15:53:38 WARNING[1217602880]: File chan_zap.c, Line 1321 (zt_call): cidspill already exists?? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /* Don't send audio while on hook, until the call

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 1604 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040604/8bc355fd/smime.bin

Hi all, Does anyone know what the correct steps are to add a XEN bridge, let''s say xenbr0 to Debian Squeeze? I have added the following to /etc/network/interfaces # XEN Bridge auto xenbr0 iface xenbr0 inet manual bridge ports eth0 bridge_stp off bridge_fd 0 And then rebooted the server but brctl show still shows eth0 as bridge: newusaxen:~# brctl