similar to: RE: Asterisk-Users digest, Vol 1 #2719 - 10 msgs

The way I worked around this is to log the "uniqueid" in a database when the call is placed with the start time and then execute an agi script upon all hangups: exten => h,1,AGI(call_log.agi,${EXTEN}) That script queries the database for the "uniqueid" and if it exists in the table it figures out the call length and updates the record It's a little bit of perl

Hello all, Saturday night, after a couple of shots of bourbon, I realized that I had an old PC sitting in the garage that I could use as an Asterisk gateway if I just blew the dust off it and reloaded it with a modern Linux distribution. In my characteristically impulsive manner, I grabbed it and started cleaning it up so that I could put it in my office without my wife having a fit. The

1st. - I'm from Poland, we don't have (yet, and hopefully forever) software patents. Is there any free g.729.1 implementation for asterisk? I want to use it for my private use (dialing into inet->PSTN gateway), and I don't want (now) to buy codec, as I don't know if I will be using this service in future (now I just want to test it). Any solutions? Maybe even

Yes. Tim Thompson http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: CW_ASN - Gus [mailto:cw_asn@fibertel.com.ar] Sent: Wednesday, October 22, 2003 1:12 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Meetme Do you have ztdummy or zaptel device in your system? ----- Original Message ----- From: "Panny Malialis"

So far in January, we've had 726 messages on -users. December 2003: 2.978 messages November 2003: 3.410 messages October 2003: 3.177 messages December 2002: 741 messages December 2001: 67 messages ...the project is growing. /Olle

This thread got me thinking of other servers that would run asterisk. The obvious question comes up if Xebian (the xbox version of Debian) would run as a SIP only server? Asterisk on an XBox would be a small box! Cheap too. Tom Schaefer

Hi Chris, I know this is quite an old email, but I was browsing through the archive :) I am currently working on "embedding" asterisk in one of Allwell's STB's. The idea is more or less exactly like yours. The STB will be solid-state and contain OS, Asterisk, Basic configuration and voice files on a flash disk. It will boot up and get a network share via DHCP. This network

Hi U can visit the http://iaxclient.sf.net for some opensource underdevelopment softphones. Take Care Obaid Amin Syed >From: Chris Albertson <chrisalbertson90278@yahoo.com> >Reply-To: asterisk-users@lists.digium.com >To: asterisk-users@lists.digium.com >Subject: [Asterisk-Users] Good W2K softphone >Date: Fri, 3 Oct 2003 23:00:13 -0700 (PDT) > > >I haven't

On the cheap side, the ITX or even MicroATX machines work great. These are commodity items, so they tend to be far less expensive than custom solutions. Various manufacturers, but we've had very good success with any of the AOpen MicroATX boards and their slimline MicroATX case: Aluminum: http://usa.aopen.com/products/housing/A340-series.htm Steel:

Another issue to consider is T1 framing. If your application is putting bits onto the T1 at the rate of 1.544 Mbit/s then the T1 would need to be unframed. I don't believe this is an option in zaptel! If however, it is putting bits on at a rate of 1.536 Mbit/s and adding 8000 bit/s for framing then you may be able use the suggestion below. Don Pobanz On Thursday, April 03, 2003 3:28 PM,

The disadvantage (depending on what you're looking at doing) is that they have to be in an operating computer Hmmm ... maybe my wish list for a self-contained FXS should expand to a self-contained one or two FXS and one FXO with software config and at least two ethernet ports (like one to internet connection and one to hub/switch for extra connections). This would be a nice self-contained

No it's not broken, I just did a CVS update recently. Try downloading from CVS and then and if you have problems quote the error messages in your e-mail. --- "Lic. Edwin Mamani Z" <emz@mail.iseye-bo.net> wrote: > > Hi > I am interest with asterisk, but I like download It and the link is > break > > Please, Any people give me this software > > tanks

--- "Olle E. Johansson" <oej@edvina.net> wrote: > From: "Olle E. Johansson" <oej@edvina.net> > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Asterisk on FreeBSD > Date: Mon, 27 Oct 2003 08:24:22 +0100 > > Rich Adamson wrote: > > >>My Asterisk (fresh CVS) takes 98% of the system load on my FreeBSD > server.

--- Peter Zeltins <peter@fintrading.com> wrote: > > > Well, I happen to be one of those very specific cases... ;) and looks > like > will have experiment with it myself. Although I'd hate to re-invent > the > wheel. > > Peter Checking e-mail this morning it looks like we have two independent "fixes" that both do what has been suggested in this

I'm working on contributing two things for Asterisk 1) STUN suport, this will allow asterisk to detect any NAT firewalls and enable eventual self-configuration with respet to NAT 2) A GNU "autotools" based build system. This will enable developers to make their code more portable and for features to be enabled/disabled as compile time. As a first step

Is there a way to set to audio gain for each SIP extension? I see in the docs this can be done for zaptel but I don't see it documented for SIP. It would be nice to be able to make the various kinds of extensions have equal volume. ===== Chris Albertson Home: 310-376-1029 chrisalbertson90278@yahoo.com Cell: 310-990-7550 Office: 310-336-5189 Christopher.J.Albertson@aero.org

Hello, I've subscribbed to "IConnect". I use it eclusively for outbound calling. I like the rates they charge but people I call complain about the audio quality. They say it sounds like I'm using a "cheap mic." or they complain about echo. The sound is very clean at my end. I'm using a Bundgtone phone with meadi routed through Asterisk to IConnect. It's

2018-05-10 21:57 GMT+02:00 Lance Albertson <lance at osuosl.org>: > I see with the introduction of CentOS 7.5 there's a new qemu-kvm-ma > package on ppc64le (which is actually newer than qemu-kvm-ev currently). > Does anyone know what the difference is between these two packages? We > currently use qemu-kvm-ev and we've run into this bug [1] which got me > wondering

Chris Albertson wrote: |What firmware version do you have? program version 1.0.4.39 -- David Kwok Iaxtel/FWD # 17001813482 ext 1002 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 1878 bytes Desc: S/MIME Cryptographic Signature Url :

Hi, I know this question was posted back in 2002/2003, just wondering if the answer has changed since then :) There are various sites which say its possible to run Samba using NetBIOS over IPX: http://samba.anu.edu.au/cifs/docs/what-is-smb.html http://nlug.org/mail/nlug__1999_05/0057.html I've tried everything I know to (which admittedly isn't much) and can't get it to work (I