similar to: recorder

I elected to receive daily digest of the mailing list. and it looks like i am receiving 3 to 4 digest a day from this mailing list . is that normal?, in fact i got 6 today Vol 1#2560 2561 2562 2563 2564 2565 Kemal

I know nothing about telephony ip phone etc.. however i have a few $$ that i am willing to spend to learn Asterisk . and i am very very curious, i believe in learning by doing( but with some hand holding) so i am looking for equipment suggestion . can anyone suggest a set of equipment i could get to check and test the cool functionalities of Asterisk. Computer , Phones, communication cards. i

as i am trying to use asterisk and install my newly purchased ( got it yesterday) digium cards. i am following the very detail steps of http://www.automated.it/guidetoasterisk.htm. but one thing did not seems right so i wanted to let enveyone know the page says: Once compiled make sure there is a copy in /usr/bin/mpg123 i think the location is /usr/local/bin/mpg123

I thought I'd share my Asterisk experience, which hasn't exactly been as pleasant as I would like but now seems usable in most ways and more then I expected in other ways. I wanted a home PBX system, that would let me treat different callers different ways depending on CID. I initially bought the Digium developer's kit to try things out. That's a single port TDM400 and a X101P.

Kemal, It sounds like you are doing something wrong. I strongly recommend that you profile your application to see exactly where the CPU time is being spent. AMD happens to have a nice profiler called CodeAnalyst that they give away for free. And it's plenty usable on Intel CPUs as well. http://www.amd.com/us-en/Processors/DevelopWithAMD/0,,30_2252_3604,00.html Make sure you test a

Hello! Attached to the bottom of this e-mail is an edited version of an e-mail I originally wrote to Digium tech support regarding Ouch and Power alarm errors I have been receiving on my TDM400. It contains a great deal of detail regarding my setup. In the end, I have found that one of the 5 phones I'm trying to make work with Asterisk is contributing to the generation of these errors.

The problem is that I have only 2 ethernet adapters in my linux router, one of this adapter pluged to the LAN and the other is pluged to a HUB who have 2 routers DSL. Each DSL routers have an static ip and the solution that I found was creating an eth0 and eth0:1 but with this option I have any way to use the eth0:1 adapte... Any one knows a solution for this ? Regards.

Today I had channel 1 on my TDM400 go to sleep, verified by pluggin in known good telco lines in various combinations on channel 1 through 4 - problem is channel 1, not anything external. So after seeing lots of stuff on the list re: TDM400's I power cycled, removed board and let linux say nothing's home, replaced board, told linux to ignore it etc. No OS/asterisk/etc changes made on

I recently purchased a Asterisk Developer's Kit (TDM) and now have it outfitted with 2 FXO modules and 2 FXS modules. I'm not using the X100P modem card that came with the kit. I'm having problems with dialing out on my POTS line. Successful dial out is intermittent. About 50% of the time the call goes through. The other 50% it is dialing the wrong number. ( I can hear the error

Sorry in advance if this is a FAQ... I've got a working Asterisk setup based on A@H 2.2. I have a TDM400 card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM card. I haven't been able to get inbound fax with spandsp and rxfax to work. Occasionally an all-text fax will come in, though it's usually badly corrupted, but in most cases, it would appear that the call is

Ok all here is a strange one...... I have a TDM400P with 3 fxo modules. I can very rarely make an outbound call to the PSTN....about once every 10 tries. However if I use a analog phone pluged into the same phone line as one of the tdm channels say channel 4, and I place the analog phone off hook and then place a call via asterisk , it work everytime. It seems like the TDM400p is having

Hello I have a working * server with a TDM card and 4 FXO ports. We have 4 lines now and need to add 2 more lines (and possibly two more later). I'm wondering the best upgrade path for this situation. The simplest I can invision is adding another TDM400 card with 4 FXO ports, and use 2 now and the remaining 2 later. Are there success stories with using 2 TDM cards? Any info will be

Hi, I'm running * 1.2.7.1 on Red Hay 9.0 w/ a TDM 400 2 x FXS, 1 x FXO. I'm using a VTech cordless that makes three short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the

I have installed Samba 2.0.4b on AIX 4.3.1 but cannot get it to authenticate Windows clients. The error that I get is 'The password is incorrect'. However when I use smbclient on the AIX box to connect to the shared resource it connects no problem. The only way that I can get a Windows client to connect is by putting the server into share mode and setting the share as guest allowable.

I excitedly installed my TDM dev kit earlier this weekend, installing asterisk and all the kernel drivers to make it work. And it did, it was fantastic. I then reboot the machine, and even after doing a modprobe wctdm, I get the following: == Parsing '/etc/asterisk/zapata.conf': Found Jan 31 13:34:27 WARNING[342]: chan_zap.c:793 zt_open: Unable to specify channel 1: No such device or

G'day all, A weird problem has just started happening with my * server, and I've googled myself stupid looking for help. My system is latest CVS, a TDM400P with two FXS modules, two X101Ps, and VoIP connections (SIP, SCCP & IAX2). My wife complained about her extension (analogue, on one of the TDM400 ports) being dead -- no dialtone. I had to shut down *, then unload and reload the

Hello! I just wanted to tell everyone that I have successfully used a TDM400 with an IBM Netfinity 5600 server. I used PCI Slot 3 (the first hot-swap PCI slot). I had a ServeRAID 3L controller in slot 1as well, which managed the server's array. Other than that, there was nothing extra installed. 2x667MHz PIII, 1GB RAM, 4 x 18GB hot-swap SCSI drives. The only problems I had were Ouch

for the same price, siemens dect phones with sms feature display caller name !!!! --------- Message d'origine -------- De: Wilson Pickett <spamsucks2005@gmail.com> A: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Objet: Re: [Asterisk-Users] Major problems with TDM400 and specific Date: 25/03/05 18:00 > > &gt; Sorry for my bad

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

I have a small system based on one TDM400 card with - 2 FXO modules for incoming lines - 1 FXS module for one phone The system was working fine in the past. The motherboard was exchanged and during the switch, the phones line was rewired with a mistake and a incoming phone line was connected to the FXS module, and there was ringing voltage on the module. Now, the system kinda works but the FXS