Displaying 20 results from an estimated 7000 matches similar to: "Re: Asterisk and gnugk (bam)"
2004 Jul 07
1
Problem when using asterisk + gnugk
Hi,
I'm using asterisk with chan_h323 together with gnugk.
chan_h323 and gnugk were recently compiled with pwlib-1.5.2
and openh323-1.12.2 as advised.
When connecting asterisk directly by ohphone
(without gatekeeper), everthing is fine.
When using gnugk for usage control in routed mode, I find
a funny situation in asterisk's H.323 debug:
== New H.323 Connection created.
--
2003 Nov 13
1
how to interconnect gnugk and asterisk?
Hello folks.
We are trying to interconnect an asterisk installation with a gnugk 2.0.5
installation to become able to use some H323 hardware that needs a gatekeeper
(particulary an Ericsson WebSwitch 100).
We have managed asterisk to dial H323 endpoints successfully (although calls
are interrupted immediately after connection with "spawn extension exited
non-zero"), but we could not
2003 Sep 01
2
gnuGK + h323 Caller ID
Hi,
I use with asterisk gnugk a gatekeeper for h323 client.
I don't understand why asterisk can't have the H323-ID (callerID).
In the gatekeeper's monitor I have this H323-ID but not in asterisk.
Does anyone know something about it, or how can I send a caller ID to asterisk ?
Rattana
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2004 Sep 16
1
ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration failed
I'm trying to configure Chan_H323 to register with GnuGK... without
success... i've failed finding sample configurations.
I'd greatly appreciate anyone who can provide sample config of H323.conf
and gnugk.ini
I am tyring to configure Asterisk as a neighbor in GnuGK.
I'm always getting this error on Asterisk.
ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration
2004 Aug 05
1
h323 gnugk to h323 asterisk and then to endpoint
hi,
we are using a voip h323 switch. the switch sends all caals to our
Gatekeeper (gnugk).
gnugk musst send all calls to asterisk and asterisk must do his choice
(sip endpoint or out to PSTN)
Making calls to our h323 switch works fine over asterisk. what must i
configure to get inboung h323 calls from our gnugk to asterisk?
any hints for me?
thx
--
Thomas K?pper
01063 Telecom GmbH &
2003 Apr 24
1
GnuGK -> Asterisk problem
Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323
channel driver.
I have a Gatekeeper that gets H.323 calls from a Cisco GW.
To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom
100, etc.
Now i want send the numbers 083xxx into Asterisk.
Easy, i'll just enter something like this into oh323.conf:
gwprefix=083
And all my calls starting with 083
2003 Apr 23
5
Unable to call H323 phones via asterisk
I receive the following error when I try to call another H323 extension from
another H323 when going through *.
NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to
find a path from 1 to 8
NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to
find a path from 8 to 1
WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit
frame type 1,
2007 Jul 16
1
asterisk 1.4 and gnugk with ooh323
Hello all,
I have seen some people asking how to configure asterisk to work with
h323 but i did not manage to do fix it yet (i am not an asterisk
expert).
Can someone help me configuring asterisk?
It is already compiled asterisk 1.4.5 with H323 support.
Everything looks fine.
Then i understand i need to configure several files:
-sip.conf
-ooh323.conf
-extensions.conf
do i also need to configure
2004 Aug 04
5
H323 Call Dropping
Hello All,
I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the
configuration:
CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK
My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk,
and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however
the gatekeeper drops the call
2011 Apr 28
1
anybody out there sucessfully using gnugk?
Hi List,
I have a client that wants me to replace their existing H323
gateway. I am able to get ooh323 and h323 to work fine in a native
environment, but the whole thing goes to heck when I have to cross networks.
Gnugk seems to be the answer to this, but I can't seem to get it to work
right. Any ideas?
Thanks
Danny Nicholas
2005 May 31
2
Problem with asterisk+gnugk
Hi!
I'm trying to build gnugk with asterisk. Asterisk is working well with chan_h323
built with needed PWlib v.1.5.2 and open H.323 v.1.12.2.
But gnugk' s installing instructions says that I need latest PWlib(1.17.1) and
openh323 to get gnugk work. Now, with installed pwlib and openh323 gnugk's
compiling fails and I get error 1.
Do you have any working solutions with asterisk and
2005 Jan 07
0
PolyCom IP3000, gnugk and * audio problems
Current setup:
Polycom IP3000 <-> gnugk <-> asterisk <-> Cisco 7940
Asterisk and gnugk are on 10.20.98.6
IP3000 is H.323, using G.711 (10.20.98.2)
7940 is SIP, using g711ulaw (10.20.98.3)
I've been asterisk for a while now, only using SIP devices. I'm happy
with that side of things, but I've not used H.323 before this week, in
trying to get the IP3000 to work.
*
2004 Jun 29
5
SIP->Asterisk->GnuGK->Cisco 5300
Hi all,
I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300
to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can
somebody help me?
Ganbaa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm
2005 Sep 22
2
Asterisk + GNUGK + Asterisk-Addons ooh323
I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK
and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How
do I change the configs to allow more than one asterisk box register to the same GK?
brian
This email was scanned by: Mcafee GroupShield
---------------- CONFIDENTIAL DISCLAMER ----------------
All information provided in this
2009 Jul 14
3
Help in oh323 Gatekeeper
Dear All,
I have installed GNU gatekeeper in my machine. I tested the calls using
gatekeeper successfully.
Now I have tried to Disable the gatekeeper in oh323.conf file
gatekeeper=DISABLE
Now I have tried to call, but the connection is not established. I have
got following warning message in console.
" WARNING[8446]: chan_oh323.c:3555
2005 May 16
1
Always Ringing
Hi all,
I am using chan_h323 from Asterisk CVS to interconnect with GNUGK
v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on
Asterisk. However, I only heard ringing when the call was answered on
SIP side. Below is the debug from chan_h323. Any help is welcome.
Thanks.
*CLI> == New H.323 Connection created.
-- Setting up Call
-- Call token:
2003 Dec 20
0
Chan_h323 & gnugk
Ok, I've managed to get inbound and outbound calling to work with chan_h323
and gnugk.
A few questions:
1) if I do a reload in *, chan_h323 loses its registration with gnugk, and
will no longer pass calls to it. A second reload will crash *. Is this
supposed to be?
2) For a configuration in h323.conf like:
[office]
type=h323
prefix=9
context=outbound
I get a message saying:
2006 Mar 24
1
chan_h323 problem
Hello,
I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too.
My network connection diagram:
----------------------------------------------
X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN
boldsoft*CLI> show version
Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux
I can make
2006 Feb 09
1
Problems with gnugk, asterisk, and ooh323
Greetings to All,
I hope someone has already gotten this working. I spent all day today trying
to get ooh323 and gnugk to run on the same box. After a lot of tweaking to
get everything compiled, I got both up and running.
I can make calls IAX to H323, but cannot make calls in the reverse
direction. I have tried many different configs on the GK, but always come up
with the same error. It appears
2005 Jul 08
0
GnuGK Nufone H323 -HEAD - Prefix issue
Greetings-
As most of you who monitor this list know, I've been messing about
with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel
driver here for some time- with pretty decent success. I'm hoping to
cash in a chip here- I've run into something that is probably a very
simple answer, yet not found a decent reference to resolve it.
Scenario- -HEAD as of last week