similar to: Announcement: Another test release of chan_sccp

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

Dear Skinny/SCCP lovers :-) I've just completed & uploaded to the cvs the newest version with fixed redial key AND implementation of speed dials. please test extensively and report any bugs. i know that the display is not yet set correctly but the buttons are working as expected. Enjoy testing... --jan (*1) http://chan-sscp.sf.net (*2) yes, bugtracker is down at the moment, will fix

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

Hi, I recently bought a 7910. I found out too late that it would not do SIP as I initially thought. Anyway before ditchingit for a 7960 I wanted to try it out, I read that the guys at http://chan-sccp.sourceforge.net/ had done some improvements to the original chan_sccp driver and having 80% functionality with this model. I have not been able to compile their driver and keep getting the

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

Hi, everybody. I was just running into a DynDNS Problem. One of our phones has a fixed IP, but the * box only has a dynDNS IP and a fixed name. So all phones running SIP are able to "survive" the change of the IP address, but not our Cisco 7920 - it changes state to "connecting to CM0" and hangs there until reboot. After reboot it looks up the current IP address of the * box

The chan_sccp page at http://www.voip-info.org/tiki-index.php?page=chan_sccp2 has been updated. See the bottom of the page. Thanks. Comments welcome. -- respectfully, Joseph =============== ---------------------= ********** =

I grabbed the 7920 tarball available from the sourceforge site dated sometime in Oct. I've got my 7920 working, however, asterisk seems to stop talking to it sometimes and requires a restart (like kill asterisk completely and restart it). Does anyone know if a new version is on the way? Does the current CVS fix this? Otherwise, the phone works great. Battery life sucks though. :(

release 20050730 http://chan-sccp.berlios.de/ <ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050730.tar.bz2> - very experimental hint (busy status line lamp or icon) support. This is a very experimental system so it might not work properly with particular cisco phones. 7960, 7970 and 7940 with recent firmware does work great. Old phones can't, of course, use the hint system. There

>Does the CVS has the 7910 support as well ? >If you want I can test it on asterisk/OpenBSD. > > yes it's supported. I can't really get it to work right 'cause I just have ciscos 7960/7905. Can anyone donate 7910/7920/7970? I will make them work just like they work in CCM, otherwise I will send them back :-) Sergio

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

I am trying to use chan_skinny but when loading the module I get: [ Booting....../usr/lib/asterisk/modules/chan_skinny.so: undefined symbol: ast_pickup_call I am using CVS 07/23 I can't get chan_sccp2 to compile, it gives me parse errors, or I'd be using that. :-/

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours

Hi, I have an asterisk running great, with 2 cisco 7912 phones converted to SIP, and a cisco 2600 xl w/ E1 and SIP. I?m thinking to expand the test adding more 7912, but I prefer not convert all the 7912 to SIP, so I?m tying to put CHAN_SCCP to work. I?ve get the sources from cvs.sourceforge.net but when I try to compile, get the followings errors: [root@asterisk01 chan_sccp]# make Now