similar to: Diax IAX2

I've configured the DIAX phone. It registers with the * server, and I am able to make calls from DIAX. However, when I try to call the DIAX phone from another phone, I get a busy signal. My extensions.conf: exten => 70,1,Dial(IAX/mike/mike,30,tr) # IAX Mike exten => 70,2,Voicemail(u70) exten => 70,102,Voicemail(b70) and my iax.conf: [mike] type=friend username=mike host=dynamic

Hello, today I tried a DIAX -> * -> DIAX connection over the internet (768/128 ADSL connection on both sides). The sound quality was great. However, we had some latency problems, and also, if both sides where not talking the first words had some problems getting thru. Is this expected, is there anything that can be done on our setup, any magical iax.conf entry? Thanks and best regards

Hi all, Thanks to Steven Sokol great work, the IAX2 bug in DIAX is now solved. For the interested people, you can download the new DLL (just the IAX2 version) from the following location: http://www.laser.com/dante/diax/wiax2.zip Replace the wiax2.dll file in the app directory with the new one and this is all. Please test it and send me your feedback. I intend to release a new DIAX version this

hi i am trying DIAX and *. i cannot make calls from ne DIAX to another. whats the config? exten=>44,1,Dial(IAX/username,20,tr) ??? just a guess. any help will be appreciated. cm ===== Designs __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree

Hi all, A new version of DIAX (0.9.8a) is ready to be downloaded from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.8a: - unconditional autoanswer or based on CallerID (user configurable); - use any Ericsson/SonyEricsson GSM/PCS to control DIAX (feedback on the phone display) through Bluetooth (or serial cable). You do not even

Greetings, DIAX seems to work well placing calls, but I can't actually receive a call . Here, DIAX (x305) "registers", then I use a sip phone to place a call to DIAX (which definitely is not in use by me at debug time, but it is idle on my desktop.I think), and then * goes to vmail. Here's the debug output: affinity*CLI> iax debug IAX Debugging Enabled Rx-Frame Retry[N/A]

I am having a problem with softphone registration, having read the list and watched it for a while for similar problems I just cant seem to figure out the problem. Using SJPHONE or DIAX , I can make outgoing calls but I can't get them to register with asterisk, I have other sip devices registering OK-7940's. From the list and the digium web site this seems to be a straight forward set up

Hi all, A first basic version of DIAX as an ActiveX can be downloaded from: http://www.laser.com/dante/diax/activediax.zip There is only one small file (diax.ocx) and a readme.txt with the usage instructions. For the moment you can only place authenticated (or not) calls and there is no feedback (ring, messages, etc) Put this simple thing on your web page and you will be able to dial from any

Hi all, A new version of DIAX (0.9.6.d) can be downloaded from the following address: http://www.laser.com/dante/diax/diax096d.zip or http://www.geocities.com/tdanro/diax/diax096d.zip Take care that the link is not available from the web page. It has debug in a file support for IAX2 only. In order to activate debugging functionality, right click on the first box from the third row (in the right

Hi, There is any other user of DIAX with this problem? Thanks, Dan

Hi, I'm testind Diax. I have flashing note about 1 new voice message. Can I hear it somehow from Diax gui, or must I call pbx to get message ? Thanks, Robert.

Hi all, I kindly ask DIAX users to send me a feedback related to the stability of the new version (0.9.9f), comparing with the older versions (especially 0.9.8). I ask this because I have DIAX runing for one week now without any crash. It is used mainly to control some X10 devices through a regular phone. Thank you and best regards, Dan

Hi all, DIAX 0.9.9g is available for download (including the updated help file and web page) from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.9g (from 0.9.9f): - during a call, accept DTMF tones as monitored events to trigger output commands - call timer on the phone display - Swedish language added - can run a command from the

Good morning, I just got asterisk up and going and set it up to communicate to test calling out to a PSTN phone number. My configuration is as follows: My Diax client --> IAX2 on my asterisk server --> IAX2 (voice pulse server) --> PSTN -->my PSTN phone. I don't have any ZAP hardware. I'm only communicating using IP. For timing, I installed the ztdummy module successfully

Hi all, The multilingual version of DIAX with both IAX and IAX2 support will be available for download later today or tommorrow. If someone interested to help me traslate from English to one of the following languages (ant not oly) please drop me a direct mail. - italian - spanish - french - portuguese In this moment the following are done: - english - romanian - german - dutch If this can be

I have my asterisk box on the public network. I have a winders box on the public network, running diax. I have a winders box, same setup, behind my Linux iptables firewall, on a private network. Both boxes cann register iax2 to asterisk, and dial, but as soon as asterisk tries to do the native bridge, the call fails. I've poked at this way too much today... what ports do I need to open for

Hi all, DIAX 0.9.3 is available for download from the same place: http://www.laser.com/dante or http://www.geocities.com/tdanro The new DLL contain the latest updates made by Steve in the iaxclient library. Still just IAX1 is supported (for the moment). What's new in 0.9.3? - accept blank passwords; - accept for registration/calls host names, not only IP Address; - password no

Hi all, A new version (0.9.6) of DIAX is available for download at: http://www.laser.com/dante or http://www.geocities.com/tdanro There are no new functions, but some bugs fixed: What's new in version 0.9.6: - add Default_user locales as new language. The program language can be automatically selected based on default user locales on your system. You still can manually select the language,

Hi, I seem to be having problems with IAX clients based on the iaxClient library. I have been working on my own client (an augmentation to the Call Manager I released last week) and it seems to regularly miss incoming calls entirely. It also occasionally misses the drop signal when the remote end drops a call. Has anybody else seen this kind of behavior? I have tested with my client, with

Hi all, DIAX 0.9.4 is available for download from the same place: http://www.laser.com/dante or http://www.geocities.com/tdanro The new DLL contain the latest updates made by Steve in the iaxclient library. What's new in 0.9.4: - IAX2 support (new DLL); - selectable DSP: Echo cancellation, AGC, Denoise; - plaintext and md5 authentication supported; - the phonebook is now in a separate