similar to: CVS Changes (NAT-SIP)

Hello I Installed Asterisk on RedHat 9. I am currently try to configure minimum with two softphone talking to each other over the LAN. I am using X-Lite softphones from xten.com site. I defined 3 phones in sip.conf and also specifies in extensions.conf file. I am able to ring other computer but there is no voice exchange ( i can't hear any think except ring). Here is the portion of sip.conf

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf

Hi folks! I bought a X100P a while ago and know I've tried to get it working here at home again ... but I can't manage to get my X-Lite client working with Asterisk (CVS from a day ago) ... I've downloaded the latest version of X-Lite and I believe that I've set it up correctly ;-) But I cant get it to register with my Asterisk - I only get "Login timed out, contact your

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

I have a PolyCom Soundpoint 500 sip phone. I'm tring to get the phone registered on an asterisk box but am having no luck. I get the following errors 192.168.22.196 being the phone and 22.254 being the asterisk box.. Apr 23 11:41:33 NOTICE[1133742896]: chan_sip.c:5623 handle_request: Registration from '"110" <sip:192.168.22.196@192.168.22.254>' failed for

Hi, I have been trying to workout how to use the call pickup. So Far, I have the following in zapata.conf [channels] signalling => fxo_ks context => local pickupgroup=1 callgroup=1 channel => 1-3 When I dial *8# all I hear is busy tone. What have I missed? thanks Jay.

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

I have two phones (111 and 112) on a LAN, and I have on a users site a phone 333. phone 111 uses sip.conf, while 112 uses real-time set-up. 111 can call 333 AND the audio is working 112 can call 333 but audio is just white noise. 333 can call 111 or 112 and audio is working. The phones are identically set-up (just user name = phone number and password are different) sip.conf (for 111 - all

Hi, Red Hat 9.0 Asterisk 1.2.7.1 Whenever I start Asterisk, I am unable to call out on my SIP channel: >-- Executing Dial("Zap/1-1", "SIP/6137451576@6477235412||t|") in new stack >Apr 30 11:02:00 WARNING[12814]: chan_sip.c:1973 create_addr: No such host: 6477235412 >Apr 30 11:02:01 NOTICE[12814]: app_dial.c:1029 dial_exec_full: Unable to create >channel of type

-This is my 'sip.conf' file: ;************************************************************* ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls tos=184 maxexpirey=3600 ; Max length of incoming registration we allow

Hi.. I just wondering why DTMF are not recognized by aterisk on incoming calls from my SIP provider ... ANy suggesteions ?` /Mike

Hi all, ------ I tried to use * over satellite, but all my effort did not succeed. The Asterisk is behind the VSAT and is resposibel for alle the SIP clients in a field location. The clients are notebooks and PDA's running SJPhoen for Windows and PocketPC. Unfortunately I could not find any Linux Client wich worked satisfying. SJ LAbs promised a Linux Version at the end of August but they

For some reason I now seem unable to control which codec is chosen. The problem happens with outgoing calls to Stanaphone. Even if I chose disallow=all and allow=ulaw as the only codecs it connects with GSM. Has anyone else got problems with these settings? Any suggestions? As I recalled it, such a setup would not establish a call if the ulaw-codec was not offered by the provider. Stanaphone has

Hello I am trying to connect linphone 0.12.2 to an * 0.9.1 box over a LAN using the console version of linphone. both boxs are using the latest alsa drivers on a LFS kernal 2.4. I am running into errors with codec compatability between linphone and *. A point to note is that I am able to connect to asterisk using other sip phones noteably sjphone however linephone is giving me

I just signed up for the BroadVoice service a few hours ago, but for the life of me I can't get any incoming voice. The incoming connection is fine as it rings my extension from outside, but I can't hear anyone talking. Outgoing voice is working fine though. I've been looking through the archives, but I haven't found a solution to the problem yet. I even tried another router

Hello, I`m trying to make a call from the snom 100( SIP mode) but whatever number I dial I get a 404 error from Asterisk. Here are my configs and a dump from "sip debug" . But if I make a call from a Zap line (see extension 2382031), it rings the snom phone sip.conf: ------------------------------------------------------------------------------ ; ; SIP Configuration for Asterisk

This has probably been answered somewhere, but I'm stumped. I have two Zap channels (FXS and FXO), both working fine. I can call from Zap/1 to Zap/2 and reverse. I've also configured SIP channels, both inside and outside of my firewall. Inside can call outside, and outside can call inside. Also, both inside and outside can make and receive calls to/from Zap/1 & Zap/2. What

Hi, Is it possible to use asterisk with Free World Dialup (FWD) ? Did someone manage to make it work? how? Best, -P -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers

Hi all I use sipgate and FWD but seem not to get it going. I do not have NAT on the asterisk box (static ip). The asterisk box has 2 network interfaces. One internal and one external. Now when I make an call to a FWD or SipGate number all I get is -- Executing NoOp("SIP/113-6d2e", "") in new stack -- Executing Goto("SIP/113-6d2e",

Hello, Is there a asterisk developer guide/source code doc or something like that? I want to see if I can implement the admin menu function for meetme. Foong -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030922/3ff8a388/attachment.htm