similar to: X100P Configs for Australia

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hello, After much searching of voip-info.org and google, I'm finally giving in and asking the list. The setup I have is this:- Single X100P card in a Debian system Inbound/Outbound POTS line connects to the X100P Sipura 2000 and Budgetone 100 on the LAN 1 Cordless and one conventional phone connected to the sipura Account on Stanaphone.com for eitherbound SIP calls. (I have other SIP

I'm having a problem getting 3 way calling to work correctly using two outside lines and one extension. The two outside lines are connected to the X100P's and a standard model 2500 phone is connected to the TDM10. When I dial the first outside destination 9xxxxxxx, the call completes correctly. When I flash the hook switch and dial the second location 9yyyyyyy. The call doesn't

Hi everybody I am having problem detecting fax with my X100P. I have RedHat 8 as OS and an X100P and a TDM400P. The X100P being plugged into PSTN. I have successfully installed tiff-v3.5.7 and spandsp-0.0.1 and also patched Asterisk wthout problem. Here is my zapata.conf file context=cda signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Howdy y'all, I am using an ATA-186, through Vonage, connected to my X100P. It works well - except, hanging up... The hangup doesn't register, most of the time, with Asterisk. Are there any known tweaks out there that I should look into? I've noted some have altered dsp.c, and rebuilt. Just curious to see what y'all think. Below is my zapata.conf file:: [channels]

G'Day, I need from regarding using the X100P. Some are specific to Australia and I have been told in IRC there are already existing users in oz, so I would appreciate your input. 1) Is the X100P Australia telco approved? 2) I have setup asterisk with X100P and whenever I dial in I cannot get any callerid information. Is this standard behaviour? If not how have other australian users managed

Hello list, I have an X100P clone card, and I've been trying to get it to receive Telstra Caller-ID without any luck. Hence these two questions:- 1) Will a genuine X100P work? 2) If so, where can I get one in Australia? Cheers, Jon

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

From: "hafeez bana" <hafeez_bana+dusers@fastmail.fm> To: asterisk-users@lists.digium.com Date: Wed, 16 Jul 2003 05:17:59 -0800 Subject: Re: [Asterisk-Users] X100P in Australia Reply-To: asterisk-users@lists.digium.com > Thanks for your reply. I tried changing the constant DEFAULT_CIDRINGS to > 2. However I still don't get callerid information. Is this what you were >

You require no changes to detect caller id with a x100p card in Au, however most carriers only provide cid as an extra cost option. Your most likely problem is CID is not being sent to you. If you believe you have the caller id being sent to you, Find a caller id box/phone and confirm it is there. In 99% of cases where I have seen people in Au complaining of no caller id, it was because they

I have an x100p which suffers from echo (no surprise there apparantly :), and a few of the things I've read about tuning out echo say the first thing to get right is the tx and rx gain, and for that you need a few different types of test lines from the telco (Telstra, Optus, whatever). Does anyone have any numbers in Australia for such lines? I think they just need to send out a tone of a

OK, I've spent way more time than I wanted to on getting an x100p clone to work in Australia. I'm happy to consider other (more functional) options. Does anyone have an opinion on both the Sipura 3000 and other Digium cards (like the TDM400P)? I need something that works with no much fuzz. I know the Sipura 3000 is cheaper the the TDM400P card. All I need is to channel my POTS line

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

All of a sudden I am getting the following warning "Ring/off-hook in strange state 6 on channel1" from chan_zap.c and I cannot answer calls. I can place calls out without a problem though. Any ideas what can be the problem. I have checked zapata.conf and zaptel.conf and they both seem fine. Thanks in advance. Dan -------------- next part -------------- An HTML attachment was

When I enable callprogress I get this error message... (when I call, it will ring forever but asterisk is acting as if it DID pick up the line ... but it never did... ) I'm beginning to think that asterisk can't hangup the line when in voice mail and this, whatever action I'll take... Actually, callprogress doesn't seem to work at all... (in my case) Mar 24 23:37:28

downloaded and compiled today's CVS (04/08/2004) tried using callprogress on Via mini-itx (running RedHat Linux 9) if callprogress is set to yes on x100p, an i call the line connected to x100p, asterisk would execute the first app and will wait forever. anyone had success using callprogress? thanks. __________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design