similar to: Choosing a VoIP Protocol.

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2)

I made a script to test if in a moultiple gateway setup all default connection are up, regardless of the fact that that gateway is the default gw. Suppose adsl1 and adsl2 are present, and all traffic goes by default to adsl1, and you want to test if adsl2 is ok. 1. I use mangles from iptables to mark icmp packets to some test machines 2. I set up a routing table for each adsl 3. I use

I have multihome network line. I want to use multi gateway, but i have some trouble +-----------------------+ | 30.1.1.1 (eth0) | <----> 10.1.1.1 ( eth1) < ---> internet | | | 10.1.1.2 (eth1) | | | <----> 20.1.1.1 (eth2) < ---> internet | 20.1.1.2

Hello, LARTC! I''ve been having troubles with load balance with ip + fwmark. I was wondering if these points are mandatory for this scheme to work: 1. Is there any problem if the linux gateway has a default gateway? Do I have to remove it? 2. In the scenario with 4 NICs, one routing table each, and another routing table doing load balance, Do the tables that imply routes that are being

Hello, I have a problem with the following setup, I hope you can help me. I have two internet gateways, one for LAN1 and the second for LAN2. +--------------+ GW1 more eth0| |eth4(SNAT) GW2 ---...routers...-----+ router +----------------- | | +---+------+---+ eth1|

Hello all. I am not 100% familiar with the Linux advanced routing capbalieties yet, so I thought , after reading source code, documentation and more that I might be better off asking the experts on this list. I am not using this ina production environment, but at home, as a test case. First of all, here is the network topology. Internal LAN <--> Switch <--> [NAT/FIREWALL/INTERNAL LAN

Hola a todos, me gustaria saber de que forma puedo ejecutar el codigo que tengo en una accion de forma automatica. Me explico mejor: Yo tengo un codigo que actualiza tablas de una base de datos con datos de otra, eso lo tengo hecho en Ruby on Rails con una accion de una vista pero me gustaria saber como ejecutarlo por ejemplo todos los dias a la 12:00 AM, para que se mantengan actualizadas las

On 13 Dec 2017, at 9.55, Mar?a Arrea <maria.arrea at gmx.com> wrote: > > > We have upgraded today from Dovecot 2.2.31 to Dovecot 2.2.33.2 and modified our config to include ITERINDEX in mail_location and we are detecting some errors like this: > > > /Dec 13 08:17:31 buzon_rhel7 dovecot: imap(rboloix): Error: stat(/buzones/location/18/48/rboloix/mailboxes/SIT -

Hello! I have a problem here. I set up a Linux 2.4 machine to do bandwidth limiting for some of our customers. Current setup is something like this: |--------| backbone |-------| |---------| |Internet|225.1-----------225.10|limiter|228.1----228.10|cust. gw2| |--------| | eth0 |-------| eth1 |---------| | 225.20

Hello, first of all, sorry for my English, I´m a Spanish student and I´m having some problems with script.aculo.us. These are the following: I have a XML file like this: <?xml version="1.0" encoding="iso-8859-1"?> <?xml-stylesheet type="text/xsl" href="barraNav.xsl"?> <barraNav> <boton>

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | | x eth1 (63.43.x.x)

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches /w support for multipath routing Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | |

??? We have upgraded today from Dovecot 2.2.31 to Dovecot 2.2.33.2 and modified our config to include ITERINDEX in mail_location and we are detecting some errors like this: /Dec 13 08:17:31 buzon_rhel7 dovecot: imap(rboloix): Error: stat(/buzones/location/18/48/rboloix/mailboxes/SIT - Pra&AwE-cticas 2014/dbox-Mails) failed: No such file or directory// //Dec 13 08:40:24 buzon_rhel7

Hello r helpers! Below is the whole coding for my programme. Before proceed more further, let me explain for you. First of all, I need to compute trimmed mean. Till that step is ok. Then I need to compute ssdw which is sum of square deviation. If I do equal trimming at both tail of distribution that I chose, I will use the first ssd formulae which is "a". But if I am doing unequal

Hi guys, I have a question about of route-map with linux, I have two routers linux, one for Internet Trafic and other for VPN traffic, both routers have public IP''s address. Internet with nat VPN with nat eth0 200.244.10.1 eth0 200.244.10.2 ---- ----

Hi. So I have been having problems using scp to copy files between two of my machines, both of which are running OpenSSH 2.30p1 (though I've had the same problem with previous versions). It is basically as simple as the file not being transferred after authentication occurs. I can however use scp to copy files back and forth from another machine using a SSH Communications version

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

I am relatively new to iproute2. Any information on the topic below would save me considerable time. I appreciate any help, thanks. We want to plug two lines into a webserver to increase the bandwidth available to the hosted sites. Rather than use round-robin DNS we would prefer to use iproute2 to use equal cost routing across the two lines. However, I am still not sure how well that will

Hello, I''m having a very strange problem concerning traceroute and routing and didn''t know if lartc or netfilter would be the correct choice for asking. (so sorry if my question is misplaced) I have the following setup: public ip -- gw1 -- 172.16.0.1 --- 172.16.0.2/and public ip''s --- gw2 --- switch --users (public and private ip addresses; ip-user-pub) from the

Hello, Our service has multiple Samba servers to serve up the same directories for our users. The users map to a single address, which directs them to a server by round-robin DNS. This hasn't really been a problem until recently. One user in particular complains that he loses his session, often in the middle of editing a document, causing problems with Windows file locking and he says he