similar to: Single/Dual DS3 - anyone seen this?

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

Obviously, there are no DS3 TDM cards that are currently compatible with Zap channels. (or are there?) Does anyone know of an inexpensive DS3 card that could perhaps be used with Asterisk if one were to try to port the Zap drivers to such a card? PCI, of course, would be the bus of choice. I think there are quite a few discouraging comments to be made on that question. Firstly, most

Yep anything over $7k makes it more feasible/reliable to go for multiple server multi-card solution. Cheers, Dean > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of izo > Sent: Thursday, 2 June 2005 8:21 PM > To: Andrew Latham; Asterisk Users Mailing List - Non-Commercial Discussion >

Hi All, We are trying to implement a DS3 capacity calls (672 concurrent calls) using asterisk server. I wanted to ask are there any compatible DS3 cards with asterisk? I tried searching a lot but could find DS3000P from digium but unable to get this product. Does anybody have any idea of having any DS3 card in asterisk box so as to handle around 600 calls? Thanks Sandesh -------------- next part

I'm trying to find the right Digium card for the Dell 2950 Dell 2850 HP DL380 G3 HP DL360 G3 Are these 3.3v or 5.0v machines ? I am out of the office, and need to buy a card today. I am looking at either the TE407 or TE412, and would appreciate any help. :) Julian

Message: 16 Date: Thu, 19 May 2005 00:16:34 -0600 Michael, Do both! As for Sip Termination: ----------------------- Contact Kristi Eggers @ Txlink.net for month to month Originating/Termination VoIP Toll Free or Local USA DID #s. Yes they do both Sip and IAX. You must have seperate accounts for either Sip or IAX and fund your account with a minimum of $100. This is what I did. Once I get

Is anyone using a media gateway with a DS3 for TDM/PSTN access? I am trying to determine the best way to scale Asterisk beyond 4 PRI's. What about the TNT Max? Can it be configured with a DS3 PSTN interface, the appropriate software and hardware, and Ethernet ports to support SIP-PSTN/DS3 media gateway services for multiple * boxes? What about TNT - SER - * ? Is there anyone here with real

Is there a DS# (T3) card that will work with asterisk? OR a card that supports more that 4 T1's per card? Kyle

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

Try adding the 'sf' option to the printer definition in /etc/printcap. The 'sf' stands for 'suppress form feeds'. If this doesn't work, let me know and I'll send you a copy of my printer definition, since I had the same problem and was able to fix it with one of the options. -- Derek Pizzagoni I.T. Manager SBE, Inc. URL: http://www.sbei.com >Date: Sun, 23

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

Hi, I find this diagram which details the kernel packet traveling : http://www.docum.org/docum.org/kptd/ Is it up to date ? I made some test and I put a DNAT rules in the PREROUTING table of an interface and I attach it a ingress policy, the dst IP wasn''t changed. the DNAT it isn''t yet make. I''ve another question (I''m not sure is it the good mailing list), for

Does anyone have any hardware recommendations for a device to take an incoming DS3 circuit and give me SIP that I can point to my Asterisk servers. Currently doing DS3 to Adtran but I want to get away from having PRI cards in all my Asterisk boxes. From looking around I've found some people using: Lucent Max TNT Dialogic IMG 1010 Cisco (Not sure which model would be best for this, the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I am very newbie to this group. I am working on ixdp425 embedded Board. I have brought up board with linux 2.4.19-rmk7-ds3 kernel with Qos support. Now i want to do traffic control (tc) on my board. Is there any patches available for this kernel and also application. I dont know which version of iproute2 is compitable one with

(Cross posting on purpose) What is the common wisdom on the list... find a telco that offers SIP termination or wait for Digium's DS3 card? Who are the telcos that offer SIP termination? Thanks,

I've posted this before but before it was just wishful thinking. But now it has become a real need. Our boss has a 5 year grudge against Lucent. They had a Lucent here that would simply stop processing calls. No alarms. No nothing. I'm sure that in 5 years, new software has been released. I've got another guy running several AS5400HPX's telling me that you can only do about

This winbox application is one that I use to manage routers for myself and my customers, so it is unlikely that there are many others trying to use it. I have used this program (through several versions of the program itself) on my Fedora laptop from FC8 all the way to Fedora 14. I don't know what wine versions that spans, but it's over 5 years and it has worked flawlessly. When I first

Thanks a lot for help in advance. I am switching from matlab to R and I guess I need some time to get rolling. I was wondering why this code : > fit.0 <- lm( Response ~ 1, data = ds3) > step(fit.0,scope=list(upper=~.,lower=~1),data=ds3) Start: AIC= -32.66 Response ~ 1 Call: lm(formula = Response ~ 1, data = ds3) Coefficients: (Intercept) 1.301 is not working

Hi, Not sure if this is a PBKAC or not:- root at ds3:/usr/share/postfixadmin# doveadm pw -s SHA512-CRYPT -p password {SHA512-CRYPT}$6$aUgGXP0UshkMj7hY$9JV4yMRsjIe/98CzmglYrMjf.9NJ.FXzxcLE9B0v3doCRUWo2wRncc6hg6VCs0DCUHQbeC/bRDZdGCge/nB/h/ root at ds3:/usr/share/postfixadmin# doveadm pw -t

BJ, >BJ Weschke <bweschke@gmail.com> >Subject: Re: [Asterisk-Users] Do Both! :) Re: Telecom >SIP termination vs. DS3 >To: Asterisk Users Mailing List - Non-Commercial >Discussion <asterisk-users@lists.digium.com> >Message-ID: <79cf63305051908056c284cc9@mail.gmail.com> >Content-Type: text/plain; charset=ISO-8859-1 >Did I miss pricing/availability