similar to: Install problem (compile error)

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

Hello, I have a situation where a remote worker dials in to the asterisk server, enters the "secret code", then dials out via Disa on a PRI. This was all working great until this morning. Now the calls is placed out, connected but there is no voice from/to either phone. This is what shows on the CLI when the calls is bridged at a verbose of 4 and a debug of 1: [Jan 25 17:51:40] --

Anyone know how to get app_queue to send logs to MySQL or any other sql server. I found info for cdr's and even configs but nothing on queue_log. If sql is not supported in the current app_queue I will be willing to pay someone to add it. John Bittner Simlab.net

Hello Asteriskos, Screenshot: http://www.areski.net/asterisk-meetme/about.php The goals of this application is to control your audience/users in the conference room. That will allow you to have a visual presentation and to control the conferences over the net. A lot of changes has be made to app_meetme to keep some conferences informations into a DB and to check through if some properties has

Hello all, i am new to shorewall and i already have a question ;) i am running a mailserver in my dmz (or actually this will be when = evertything will be working fine with shorewall) with public ip = addresses.. i have a subnet of 8 ip addresses (255.255.255.248 mask) and = i was planning of the classic 3 nic (eth0-2) setup... the dmz should = work with proxy-arping...=20 now my quesion is

Anyone know how to disable DNS in asterisk so PJSIP still works when the internet goes down. I tried a few things but nothing is working. I even installed BIND on the asterisk box ...that didn't even work. Once I pull the plug on the internet, I cant dial anything. John Bittner CTO [xaccellogoemail] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax:

Anyone get the Nortel 1140E phones working with Asterisk ? These look like great phones and I would like to start using them on our deployments. I know these will work with Asterisk but the sample config files are hard to find. My next step, if I cant find anything on this list is to purchase a Nortel Communication Server for testing. If anyone has a used NCS that works with these phone via SIP

Anyone having any problems with CVS-HEAD-12/24/04-15:59:15 and ALERT_INFO I have a system setup with polycom phones configured to auto answer on internal calls. When we upgraded to the latest CVS the auto answer stopped working. My dialplan has not changed. I did a sip debug and I dont see the alert-info tag in any of the sip traces. Any help would be appreciated. Thanks John Bittner Simlab.net

Anyone having issues with endpoint call forwarding on asterisk 11? Was working perfect with 10. Issues are not phone related have tried cisco, polycom and Xlite, all fail. Backtrack to 10 and it works ok again. Any help is appreciated. Thanks John Bittner CTO [cid:image003.png at 01CE76D7.8AB33690] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax:

Anyone know why zaptel would ignore a facility message from an ISDN PRI. I am trying to get Callerid name to work. The carrier says it on and I see it in the pri debug but asterisk never gets it. Any help would be appreciated. Thanks John Bittner Simlab.net Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 572/0x23C) (Terminator) > Message type: ALERTING (1) >

Guys, I have a customer that heavily uses modems, the problem they don't work reliably with some of the carriers I have used like Level3. This is somewhat expected due to the limits in VoIP so I need a better solution. If I set up an asterisk system on customer premise with an FXS card in it and have calls sent to another asterisk box with a PRI can I get this to be more reliable and better

Today I was hacked but caught it very quickly. This is the weird part, they hacked an IP Auth based account by simply knowing the account name. How is this possible? I am running Asterisk 11.5.0. Now it's my fault I used a dictionary based account name but how did they bypass the set ip I had under the account for this host. This also happened with fail2ban running and I pay for Humbug .

Hello Anyone have a working copy of Fail2ban asterisk filter asterisk.conf for Asterisk 16 running PJSIP. I have tried 10 different filters but none of them show any matches when testing with fail2ban-regex I see date template hits but no matches.... My log [2019-06-06 15:37:20] NOTICE[18081] res_pjsip/pjsip_distributor.c: Request 'REGISTER' from '"2405" <sip:2405 at

Anyone know how someone can hack an asterisk box and register with every single account on the box. This box only has 3 accounts, with very complex passwords. Have VoIP blacklist setup and fail2ban... The hackers were able to make 2 calls to Cuba before my alerting system texted me. I am running asterisk 16.3 with PJSIP. This is my only box open to the outside world, a requirement for this one

Anyone know how to let asterisk deal with the progress codes coming from the carrier? The problem I am having is when a customer calls an invalid number the carrier tells me the call is invalid via a progress code but doesn't route me to a recording (this number is invalid). Instead they hang up on me causing a fast busy or sometimes hold up the call with dead air for 15 to 30 seconds then a

To all: No matter what I try, I cannot get the system to wait for the admin to join. It just dumps users into the bridge directly. I do not have a pin for users, does that matter? What am I missing? Another issue the absolute timeout is not working ? ... have recordings that last for over 24 hours... and this should not happen... All calls should hangup after 4 ? Any ideas ? Any help is much

Hello, I cannot find much on examples but I did find one in Russian that shows this to use + or - the time difference from GMT. I have been testing and it does not work. 1st question do includes work with timezone include => day,08:00-17:00,mon-fri,*,*,[+5] Not sure on the formatting, is it correct ? ... I tried without the brackets... that also doesn't work. If not supported in

I don't know if there is some fault in compiling or a bug of the new R-1.7.0 version: cl.pam.2 <- pam(as.dist(1-cor(mel.data)),2) plot(cl.pam.2) perform a right partitioning and silhouette plot on the old R-1.6.2 instead "Error in clusplot.default(x$diss,...... ; x is not numeric" is the output on the new R-1.7.0. Same platform: RH8.0 i686. Some suggestions? A.S.

Hello, I am looking for a consultant that know asterisk in and out including how to troubleshoot sip and rtp. I have a device that this acting very strange and I need to prove it's the device code and not an issue with my setup. Very simple setup, all local no nat... Grandstream video phone and a AIphone IX-MX7 door station. PJSIP ... doorstation to grandstream 3370 works perfectly. Early

Hello, Anyone know how to set the "To:" in an invite for PJSIP to custom settings. I got the "from" to be the way I need it. From: <sip:e04f43a2ed59 at xaccel.net;tag=44l1nRmW2 To: "TEST" <sip:5tf2f2s0rbtdj-20d14fl6n65t0o-0u03 at 34.221.174.202> I have tried a lot of changes to get to this but nothing works. I am getting this From: sip:109643183 at