similar to: analog or sip ? was far end disconnect supervision

I'm starting to shop for my first channel bank and one of the features that eveyone seems to recommend is "far end disconnect supervision". What other terms do various manufactures use to describe this same feature ? Is "calling party disconnect" the same as "far end disconnect supervision" ? Thanks

Hi, folks! Sangoma has an informal user survey up on their home page (at http://www.sangoma.com) asking if people would use their A500 card for North American BRI, if it were supported. I encourage anyone with an interest in voice BRI in North America to vote; this information will be used for deciding whether to make the investment in developing a National ISDN driver layer for it. Benefits to

Can anyone help me with the term that SBC uses to refer to disconnect supervision? I have an Adit 600 channel bank which has helped improve the disconnect detection time down to about 8 seconds. This is still causing some issues in particular with call progress on we are having a few disconnects while calls are in session. I have talked both to some local phone contractors and SBC directly and

Can anyone help me with the term that SBC uses to refer to disconnect supervision? I have an Adit 600 channel bank which has helped improve the disconnect detection time down to about 8 seconds. This is still causing some issues in particular with call progress enabled in * we are having a few disconnects while calls are in session (about 2 reported in first 5 days of use). I have talked both to

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

> > > > I would be grateful if anybody could tell me what I should > > tell Verizon > > in NJ so they would enable "disconnect supervision" for my lines. > > > > Apparently "remote hangup notification" or "disconnect > supervision" or > > "calling party control" is NOT the magic phrase for them. Although >

Does anyone have disconnect supervision working on their TDM400P or X101P cards (to/from the telco)? Googling "telco disconnect supervision," I found the following description: http://mirror.lcs.mit.edu/telecom-archives/telecom-archives/TELECOM_Digest_Online/1559.html [cut] Re: How Do I Get "Kewlstart" From my Phone Company? Paul A Lee Tue, 24 Aug 2004 16:58:16 -0400 ... It

Hey all, anyone know the status of disconnect supervision on POTS lines in India? Set up an asterisk box, TDM cards, in Mumbai, and doesn't seem to have disconnect supervision...... Thanks -- Chris Earle System Solutions Specialist

Hi all I'm using sangoma a200 cards in the UK and have the ongoing, often noted problem of disconnect supervision with BT POTS lines. Just noticed this post on http://www.voip-info.org/wiki/view/UK+Asterisk+Details stating that potentially someone's got a solution : "TDM400P & Not Detecting Hangups: Got a TDM400P installed and having problems with Asterisk not detecting

Hello! Now that I finally have my TDM board working, I want to move forward with using PBX functions. However, it seems cumbersome to use standard POTS telephones with Asterisk. I know that there are many of you installing even large systems based on channel banks and analog telephones. What phones are you using? How do you simulate phone system features on a phone that doesn't have

Hi I know this gets covered fairly regularly, but I've had a search through the archives and can't find anything dealing with this specifically - apologies if I've missed it though. I've got a TDM11B with the fxo port plugged into a standard UK BT PSTN line, loading wcfxs with OPERMODE=UK. All's working well, except if I get an incoming call through my bt line, and the

I'm trying to use Asterisk as a voice mail system and all is going well except for one issue. When the outside caller drops the connection Asterisk doesn't sense it. It keeps the line open for about 2 minutes before dropping it. The FXO is attached to a key system (hybrid PBX). There was a home-type digital answering machine previously on the same extension and it was able to sense

The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as I know, the lines around here have disconnect supervision (I've seen some other Israelis on this list, anyone know for sure?), because it's worked on Dialogic cards, which reported hangup, not busy detect (while when I connect a Dialogic card to a PBX, I have to measure the busy signal's frequency/cadence or

I have an Audiocodes MP-118FXO in production. When an outbound call is made and the remote party hangs up, the Audiocodes hangs up the call immediately. But if an incoming call is received and the remote party hangs up, the Audiocodes does not hang up immediately. I have tinkered with Current Disconnect and Polarity Reversal settings, to no avail. Anyone experienced this issue with Audiocodes or

Hi , Thanks danny nicholas. Finally we get the things done with following. If i specify busypatten=500,500 then asterisk does not recognize hang up signal. After removing it only all are working fine. I choosed 2nd option as per your suggestions. working chan-dahdi.conf: ==================== signalling = fxs_ks busycount = 3 busydetect = yes callprogress = yes progzone=in usecallerid=yes

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

Ok so this is officially driving me crazy. I have an Asterisk 1.6.1.6 install with DAHDI/DAHDI tools (latest) and an OpenVOX TDM400 card with 1 FXO port and 1 FXS port. I have a POTS line from my phone company attached to the POTS line. I have asked for "disconnect supervision" to be provisioned on my line and they claim to have added it. However, my scenario is as follows: I receive a

After reading through several recent threads, I started to wonder why the Cisco document (and other VoIP documents) appears to present this issue as VoIP gateway specific. Don't (plain old) PBX' face the same issue if they use analogue interfaces? If there are analogue PBX' at all, how do they solve the problem? Yuan Liu

Hi all, I'm interested in buy a Astribank-32 but i never heard about detection of far-end disconnection. Does anyone have some experience about that functionality in this hardware ? Thanks in Advance, Gleidson Antonio Henriques

Hi, Not sure if anyone will be intersted but I have put together an install guide for Asterisk on RedHat 9.. Its nothing special but it may be of use to the newbies.. Like me.. If you would like a copy let me know and I will send it to you.. later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze