similar to: Asterisk + fax

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

Hi There. I have the following setup : Asterisk 1.2.4 , freePBX 2.0.1, spandsp-0.0.2pre24 My problem is as follows : If I set up a very simple extensions.conf. when I dial from a fax machine, it seems as if no fax is being recognised. If I answer the call, I can hear the fax machine beeping. extensions.conf :

Hello All, I am looking to get asterisk to receive faxes but I really don't know where to go from here, any help pointing me in the right direction would be great. What I would really like is for this second line to answer faxes, but if a user typing in an extension it goes to that extension but I need to get the fax working first. Error I get when I turn on Fax conf... pbx.c:1945

Does anyone know of any obscur reference for detecting an incoming fax. I currently have AMP running and everything else is working great. Installed the spandsp patches and software... using the default AMP extensions.conf, I start sending a fax, I hear it pick up and transfer to voicemail after 20s. Fax is set for system... Here is the detail from the extensions.conf [global] FAX_RX = system

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

I have managed to get spandsp working, and if I dial a specific extension I can receive faxes. WhooHoo. However, I was wanting to use the "fax detect" option in order to allow individuals to receive faxes, but can't get that to work. Given the following extensions (mainly copied from examples on the wiki), why is the call simply passed onto the sip device rather than being

Since updating * via CVS earlier this week, I've been having problems with cdr_mysql. Prior to that time my queries and cdr all worked fine. Now, even though my queries still work, I get the messages similar to this: ERROR[1211374384]: cdr_addon_mysql.c:203 mysql_log: Failed to insert into databas -- Hungup 'Zap/74-1' Anyone have any suggestions what went wrong?

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten => fax,1,Dial(Zap/1,,d) [FaxTest]

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

*@home has this for it's incoming fax macro --- start snip --- [ext-fax] exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1) exten => in_fax,2,Macro(faxreceive) exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf ${FAXFILE}.pdf) exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM}

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

Hi everybody, I have a Fedora Core 4 x86 32 bit install, which I recently upgraded from asterisk 1.2 to the office 1.4.4 tarball. In the process of doing that I had to upgrade some autoconf/automake stuff, but it worked fine, and my new asterisk works fine. Except that anytime I receive a fax with spandsp and app_rxfax, asterisk seg faults. I have applied the spandsp

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

I have asterisk 1.2.18 running on a new system we just installed. Although I've used AGIs many times in the past, I'm stumped on this one. It may just be a simple issue that I need another eyeset to look at. My AGI does the following: #!/usr/bin/perl #Load a few modules... use Asterisk::AGI; use DBI; $AGI = new Asterisk::AGI; #Grab input from Asterisk my %input =

Good day everyone, Hope someone can help me with a spandsp/app_rxfax problem. I've compiled spandsp 0.0.2pre26, and app_rxfax.c from soft-switch.org Both went just fine, and i've checked my libtiff and libxml (along with the devel-s) versions - they're fine. Machine is fedora core 3, x86_64. Asterisk is 1.2.17, zaptel 1.2.15 Dialing in on a zap channel. T1 PRI, esf,b8zs TE110P

Hello, Is anyone successfully using spandsp 0.0.2pre25 with either asterisk 1.0.x or 1.2.4? I've built a Gentoo ebuild for this version of spandsp and app_rtxfax, and it builds, but I'm not having any luck getting it working. 99% of my test faxes fail. Reverting to 0.0.2pre20 yields a much higher success rate. I've bumped the console debugging level in logger.conf to include debug