similar to: IVR Question

After switching to Asterisk 1.2.14 from 1.0.x, I encountered a very strange problem. There is no sound with Playback() or Background() commands. Even though, Asterisk console shows the file is being played when I call the extension (i.e. echo test), I can't hear anything. My echo test extension looks like this: exten => 600,1,Answer exten => 600,2,Playback(demo-echotest) exten

Can someone point me to some reasonable example / starting point to implement a basic IVR menu? Looking for something rather simple like the press 1 for sales, 2 for tech support, and probably an option to list the voicemail directory kind of thing. Nothing elaborate needed, just basic menu. (Yes, I did look at the wiki and google searched for "ivr menu".)

Hi, I'm hoping someone has a suggestion for us. We have an ITSP that sends inbound traffic to us. Unannounced to us last week they started alternately sending traffic from two IP addresses, instead of the one we knew about. Some calls would pass, and others would be dumped as unauthenticated. I added the 2nd IP to the sip.conf file to allow for this, and everything was fine

Hi all, I am trying to use a "Siemens optiPoint 300" IPPhone (H.323 only) with Asterisk (1.0-RC2). So far I have been using the H.323 channel included in the tarball (Nufone ?). I encountered a strange behaviour when I try to make a call from the IPPhone to my Asterisk box : =====> here is the H.323 configuration for the incoming calls (192.168.1.50 is the IP of the

Thanks to help on this list and Sangoma's support we have incoming and outgoing calls passing through asterisk. However both incoming and outgoing calls are greeted by silence. I've noted our existing config below with our test extensions.conf. Help much appreciated Rory Zaptel ----------------------------------------------------------------------- loadzone=uk defaultzone=uk #Sangoma

Hello People, I'm newbie in * 1.0.1, running a Linux 2.6.7 in a Debian Sarge, and this is my situation: +------------+ +-------------+ | Sip Server |-------------|CISCO PSTN GW| +------------+ +-------------+ \ || \ || \ +----------+ || | Asterisk |=========

I am making some changes to the dial plan at the request of the company president and have run into some problems. I have a couple of layers of menu's and I am not sure how to handle them. Here is how it should work (sorry for the crappy diagram) main menu --------Dial 1 for support | Dial 2 for special | Dial 3 sales

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

> Olle E Johansson wrote: >> >> 23 apr 2007 kl. 19.55 skrev Russell Bryant: >> >>> John Todd wrote: >>>> To morph this into a -dev thread: if this patch were to become (again) >>>> useful and error-free, is there any objection or usefulness in adding it >>>> to TRUNK? Personally, I think there is, if there is a method by which

Hi :) I have a little 'slow dialling' problem. When I dial, e.g. 200# for the Asterisk 'echo test' demo application from my PBX extension 1010, I see this in the console the instant I press the # key: -- Starting simple switch on 'Zap/65-1' -- Accepting overlap call from '1010' to '200' on channel 0/3, span 3 then exactly 3 seconds elapses, and

I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone are registered by the below information *CLI> sip show peers Name/username Host Mask Port Status 2002/2002 192.168.22.199 (D) 255.255.255.255 5060 Unmonitored 2001/2001 192.168.22.200 (D) 255.255.255.255 5060 Unmonitored 2000/2000 192.168.22.198 (D)

I'm trying to setup a VERY simple mainmenu ivr but can't seem to get the tones to be recognized during the background( ) the playback and background files play, but asterisk doesn't do anything when I start pushing keys - I've tried it from softphones and pstn line phones Can anyone tell me what I'm doing wrong? Required contexts Exentions.conf below [from-broadvoice]

I'm trying to use an hfc based pci card with asterisk but every call fails falling in the congestion extension. exten => _0.,1,Dial(${TRUNK}:${EXTEN:${TRUNKMSD}}||tr) exten => _0.,2,Congestion Looking in the syslog i can see: isdn: HiSax,ch0 cause: E001B it seems that this is a terrible error when arrives... hard to tell what is the cause. Also terrible is finding a lot of material

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/dd10d5ef/attachment.htm -------------- next part -------------- Hello Today I observed this strange problem, as soon as I called from my SNOM IP phone (910) to CISCO IP Phone 7905G (810), I got following warning messages and call didn't connect. But after couple of minutes this

Hello, I`m trying to make a call from the snom 100( SIP mode) but whatever number I dial I get a 404 error from Asterisk. Here are my configs and a dump from "sip debug" . But if I make a call from a Zap line (see extension 2382031), it rings the snom phone sip.conf: ------------------------------------------------------------------------------ ; ; SIP Configuration for Asterisk

I've just started consulting for a SME client based in Reston Virginia. They don't know it yet but they are going to need a hosted asterisk service and some DID's. Email me if you are able to provide 10 DID's in Reston (must be able to be ported away!!) and hosted Asterisk with end user configurable IVR etc. Probably only 5-8 users at the moment BUT... they'll be

Hi I have a cisco 7960 Phone that connects to my Asterisk server without a problem. But when I call the echotest it just hangs up, echotests from other VoIP providers works just fine. I have tried a softphone and it works just fine. The error I get when the 7960 calls is this: -- Executing Playback("SIP/2000-180c", "demo-echotest") in new stack -- Playing

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Hello mailinglist, I want to connect Asterisk with OpenBTS and make a call with a mobile phone. I use: Ubuntu 11.10 + Kernel 3.0.22 GnuRadio 3.3.0 Asterisk 1.8.13 OpenBTS 2.8 Nokia Mobile Phone OpenBTS works and I can send sms from the OpenBTS server to the mobile phone. What I also need is a call between Asterisk and OpenBTS. I have also two soft phones which works with Asterisk. And also

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on