similar to: 7960 Register with 2 * Servers causes phone to reboot over and over

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hello all, I've got a Cisco 7960 running version 7.4 firmware (heard there were problems with 7.5) and I can't get it to register with Asterisk. I've stripped down my configs on the phone to a bare minimum, and posted them below. Basically, the Cisco phone sends absolutely no packets to the proxy when it gets booted. If I make an outgoing call I see traffic getting to Asterisk, but

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

Hi all (is a bit of a Cisco question, but perhaps it's already been asked here). I'm trying to setup a TFTP server for dynamic configuration of my 7960 Cisco phones. Cisco docs suggest I download the following files from their web site: * OS79XX.TXT * SIPDefaultGeneric.cnf * SIPConfigGeneric.cnf * RINGLIST.DAT * P0S3xxyy.bin * P0S3-xx-y-zz.bin * dialplan.xml * syncinfo.xml I only

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

Hi, I got a problem of having to upgrade 35 Cisco 7960 phones from default firmware of 3.1 to 7.5. The problem I get is that when trying to upgrade I see on the tftplog that it can't seem to find the file (8 character issue). So I renamed the files to suit what is supposed to be in them. I am trying incremental upgrades from 3.1 -> 5.3 -> 7.5, with no luck. It goes to

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

I know this is a little off list but I can't think of a better place to ask this question. I upgrade the phone to 7.1 and it installed the Universal Application Loader. Now I'm getting Protocol Application Invalid after it reads tftp SIP(MAC).cnf Any ideas? Again sorry this is off topic

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

I'm using P0S3-08-2-00.. I noticed the callerID started showing up with the number, then @<proxy-addr>... So the callerID on the phone looks like: 2145551212@10.10.10.10 which of course is logged in the missed calls exactly like that, and completely foobars the dialing string if you try to dial a missed call by simply hitting the dial button. Can anyone else verify this problem? 7.5

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

When I try to flash my 7960 with SIP I get messages like this in the tftp server logfile: Aug 27 02:01:17 home tftpd[32590]: tftpd: trying to get file: P0S3-03-0-00 .bin and the phone says something similar on the display for a brief moment and puts a funny char where the space in the filename above is. Seems like around 1 in 4 of the 7960's I have flashed with SIP have this problem. Anyone

Hello, and thank you for your time answering my question. I have a Cisco 7960 running SIP firmware POS3-06-X-XX. If I want to upload SIP configurations via *.cnf file from my tftp server, do I need to include the OS79XX.TXT and P0S3-06-X-XX.bin to the tftp server root directory to be uploaded every time the phone reboots? Thanks again for your help. Oliver

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: