similar to: mysql cdrs

Can skinny work behind NAT? I have a Cisco 7910 using SCCP behind NAT that has one way audio. The called party cannot hear the calling party who's using the 7910. skinny.conf ; ; Skinny Configuration for Asterisk ; [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 0.0.0.0 ; Address to bind to dateFormat = M-D-Y ; M,D,Y in any order (5 chars max)

I'm trying to use accountcodes, but experiencing inconsistant results. I have two * servers, one which appears to be working as expected and one not. I would like to prepend the device's accountcode to the dialed number. The sip1 server does not seem to have the ${ACCOUNTCODE} variable set when reading the extensions.conf, but sip2 server does. What troubleshooting or trace

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Hi there, I am trying to delay sending out DTMF from Voicetronix OpenLine4 to the CO line. The reason being is that Voicetronix sends out the DTMF too fast even before the line is fully established with the carrier. Usually when dialing an 8 digit number, only 7 digits are actually successfully heard by the carrier. Currently, my dial plan is: exten => _9.,1,Dial(vpb/1-1/${EXTEN:1}) Daniel

Hi list, I am having some difficulty implementing a certain dialplan where the following happens. If the first Dial() is not answered, I want to play a small greeting then ask the caller to either hold the line (try calling again) or press 1 to leave voicemail. exten => s,1,Dial(${BLAH},10,Tt) ; Dial 10 sec exten => s,2,Answer exten => s,3,Playback(greeting)

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

When dialling in and dialling my extension, when answered I get " Read_channel ## vpb/1-3: Setting record mode, bridge = 0 WARNING[20499]: File chan_sip.c, Line 1111 (sip_write): Asked to transmit frame type 8, while native formats is 4 (read/write = 4/4) == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' -- hangup on vpb (vpb/1-3) -- Hungup on vpb/1-3 complete --

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

I have installed a 6VPCI card from voicetronix's but i can't get astersik to use it! Now looking at the loaded modules the chan_vpb is not loaded- so I assume that is why it is not working. Now I modified my vpb.conf file and extensions.conf, have I missed something Has anyone a installation guide as I am very new to this!! I have had asterisk working with SIP extensions. by dowloading

Good day all I'm using sip protocol and a openline4 card.If I dial out of the pstn and hangup a answered call it does not disconnect the connection.It shows there is still a call on the external phone I called but on my side its says i'm not connected.We are using x-ten soft phones Can someone please help me Thanks Altus

Since updating * via CVS earlier this week, I've been having problems with cdr_mysql. Prior to that time my queries and cdr all worked fine. Now, even though my queries still work, I get the messages similar to this: ERROR[1211374384]: cdr_addon_mysql.c:203 mysql_log: Failed to insert into databas -- Hungup 'Zap/74-1' Anyone have any suggestions what went wrong?

Hi, I'm currently trying to originate a call with 2 variables set. I tried doing it via manager API and call File and both failed, because the vars were not separated. I'm using Asterisk 1.2_beta1 on this machine Can anyone here verify wether this is a bug or just a stupid error on my part? This is the callfile I tried to use, after the manager way failed: Channel:

Hello, I have a samba 1.9.18p4 server running as a domain master browser on a subnet, with some clients distributed on other subnets. If there are only Win 95 clients on a subnet, browse sync works - but not if there are Win NT 4.0 SP3 machines on that subnet. Error from nmdb (at log level 3): sync_with_lmb: Initiating sync with local master browser MAILHEIDELBERG<0x20> at IP

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

Good day all I added the music on hold entry in vpb.conf and commented out default line in musiconhold.conf. Asterisk starts up with the default mp3 but as soon as I remove it and add my mp3 it just doenst start up and gives a broken pipe error? Please Help or advice Thanks ALtus

Any guidance on how to get my openline4 to get recognized by asterisk@home? I've got my vpb drivers running, but not sure how to add it as a trunk, should it be via zap? or is there another way? Thanks, Chuck

Good day all We have a voicetronix openline4 card If someone calls in from the outside the pstn and into the system and hangsup asterisk does not deteck the hangup any Idea why please Help Altus