similar to: Setting up asterisk on Rh 9

Sorry, if this question has been asked before. I have redhat 9 and asterisk installed. I would like to know how can i make work the phonejack with asterisk.

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

My thoughts on this after reading Steven's very politically worded reply is that IMO your best bet would be to go with RedHat, I am not going to go into details about the if's, when's, why's, and but's.. I am running Asterisk quite well on RedHat 9 and if you like I have created an install guide for setting up an Asterisk box on RedHat 9 which I can send to you if you are

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

Hi Everybody, I am new to Asterisk. Can anybody suggest me some link where I can find architecture level detail of this system. My aim is to find out how easy it is to port it on a new hardware (T1/E1 and POTS)? Any input is highly appreciated. Regards Arun

How will this fare? I am planning on putting an asterisk box for my brother in the Philippines but they only have dialup internet. I want them to be able to use a telephone set on a phonejack or linejack card and call me and vice versa via VOIP. My setup in the US is working already with a broadband cable connection. I am thinking that dialup may not work because of the bandwidth required

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

Perhaps this will help... I have a phone connected to a QuickNet PhoneJack card. When I pick it up, I get a dial tone. When I dial a certain number of digits, the call is processed by Asterisk. The question: How does Asterisk determine how many numbers to let me dial? I'm banging my head against the desk here... _9XXXXXXX lets me make an outbound call, but _9X. only lets me dial 9 plus

Here is a question for all you routing guru's out there.. I am using an ADSL line (512/256Kbps) to connect from the internet to my Asterisk server.. At a point I will run out of bandwidth so the cheapest option would be to add a second ADSL line.. The problem is how will the routing work? If I put 2 IP's on one NIC will the return traffice be routed back via the gatway of the IP that

This is troubling. Shouldn't your hubs/routers autosense the 10MBPS? ---------- Original Message ---------------------------------- From: WipeOut <wipe_out@lycos.co.uk> Reply-To: asterisk-users@lists.digium.com Date: Wed, 15 Oct 2003 07:53:13 +0100 >Steven J. Sobol wrote: > >>On Wed, 15 Oct 2003, Jon Pounder wrote: >> >> >>Nothing works. Call transfer

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

If you have any quicknet cards you are not using, I may be interested in them. I'll discuss terms after I know what you have. For sake of high shipping costs, I'm not interested in overseas shipments to the United States (where I live). My best resources will be for those that have PCI PhoneJacks, or PCMCIA CardJacks. Please reply to my email address, and not the mailing list.

This is not really a problem just something I noticed in my testing.. When two or more Asterisk servers are connected by IAX2 trunks it does not make use of any "shortest path" type system.. (maybe this is still planned somwhere down the line, but may come in handy to those who have multi asterisk installations) Here is the setup.. UA1--- Asterisk1----[IAX2 Trunk]---Asterisk2---UA2

Hi, I had asterisk installed, ISDN-adapter, some x-lite software-phones and I can call betweens the softphone- and 'normal' phones during the ISDN-card. 2 questions now 1) Is it posible to create policies, so that some SIP-users can dial ALL numbers, and some SIP-users not are allowed to dial eg. 900xxx-numbers, 30xxxxxx (mobilphones), 40xxxx(long distance) and if possible on time

Apologies if there is a cleanly written and searchable FAQ that I could be directed to. I have no problem to RTFM if I can find the FM... Does Asterisk currently operate under RH9? I have IBM Netfinity 4000R servers that do not support X windows under RH8.x and I prefer not to go back to RH7.3... BTW, where would I find a useful FM? David -- David J. Sussman, MBA email:

Hey.. Has anyone played around with Asterisk on the Itanium2, Opteron or Athlon64?? Can Asterisk (or Linux for that matter) actually make good use of a 64bit system?? Later..