similar to: Chan_h323 docs

Ok, I've managed to get inbound and outbound calling to work with chan_h323 and gnugk. A few questions: 1) if I do a reload in *, chan_h323 loses its registration with gnugk, and will no longer pass calls to it. A second reload will crash *. Is this supposed to be? 2) For a configuration in h323.conf like: [office] type=h323 prefix=9 context=outbound I get a message saying:

What types of ISDN BRI cards work well in Europe (Guadeloupe, Martinique and France) ? For example: AVM C2 or AVM C4 or eicon Diva server 4 BRI? Any others? Which driver is appropriate? Ray Burkholder ray@oneunified.net http://www.oneunified.net 704 576 5101 -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. -------------- next part

I have a few 7960 Skinny phones. I've edited the skinny.conf file, but I'm a little unsure as to how get the phone to figure out which ip address it should register with when it boots. How do I do that? I already have a tftp server for my SIP based phones. Do I need a tftp server for skinny configs at all? And if so, can it be the same tftp server as the SIP ones use (I'm not sure

> The documentation mentions that the Digium channels can be split into some > voice channels and the remainder of the channels used for routing IP > traffic. > > Does any one have this in use in conjunction with Asterisk? Does it work > well? Would you recommend it for a production server? > > Obviously, if this works, this makes for a cost effective platform where

I'm trying to come up with an elegant solution to handle roaming users in a branch office scenario. I have a number of possible scenarios, none of which seem to completely solve the problem. Perhaps someone with a better feel of the interactions can help me out. Is the 'switch' statement useful in some way? What are the ins and outs of the 'switch' statement? Come to think

We needed the client browser to be open all the time for dynamic data to load without the page refreshing. After looking at all of our options we decided on programming it ourselves using flash rather than java. We have a flash frontend thats tied to our backend mysql DB. We use it for loading web site traffic data, email opens, click-throughs, bouncebacks, stats, etc. It could also be used with

I have several Cisco SIP gateways sending calls to Asterisk. Because the gateways don't have user-agents, they don't authenticate with Asterisk. And because they don't authenticate, they use the default context in the sip.conf file. Is there a way to either: A) identify the inbound gateway with a variable, in channel info, or the manager interface? If there was a ${SIPDOMAIN} for

>I spoke with someone today who is interested in an IP Centrex solution that >starts with about 3500 extensions in a multi-tenant application. And >growing from there. > >I'm wondering about scalability of Asterisk. I'm trying to put my head >around how to put the whole thing together, if it can be put together. > >The nice thing about it is that if I can show

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

If you're using perl on RedHat 9 make sure you put this command somewhere in your boot scheme: export LANG=C or at least execute it before running perl scripts. Redhat has EVERYTHING set to LANG=UTF-8 and it screws up all sorts of perl stuff, and several other pre-written programs in other languages too MATT--- -----Original Message----- From: Ray Burkholder

Hi, I have the following topology: PSTN/H323 gateway->GNUGK->chan_h323/chan_sip->SIP EP Mostly everything works fine except chan_h323 is not passing audio from PSTN before the call is answered and as a result users can't hear PSTN announcements (like "the number is not in service") that's played on unanswered call. All they hear is just continuous ringtone as though

hi IIRC, Jeremy once said that chan_h323 could be used as a gatekeeper but perhaps lacking a few features as compared to gnugk. Is this possible? I have some dlink DPH-100H phoes here for testing, but they require a gatekeeper, and if I can do it, I'd love to keep gnugk out of this. thanks roy

hi, i had asterisk and gnugk running on fedora core 2. it worked quite well. then, i needed to change to red hat 9, and i'm experiencing troubles with h.323 :-( making a call from a h.323 phone (innovaphone) does not work, and dial-in also doesn't. below is an excerpt of what happens, when i try to dial-in my extension (126). it takes about 10(!) seconds, until the 'Called 126'

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

I have one and only one reason to use OH323, and that is it works with Cisco's CallManager. The standard H323 channel has one-way audio issues when connected to CCM and fixing them has been identified as a low priority/never going to happen task. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Dear ALL: I find that everybody discuss with asterisk-oh323 instead of chan_h323 of asterisk channels. Why do they choose asterisk-oh323 and not use the build-in module (chan_h323)? What different between these two componments? In my guess, the build-in module should be easy to implement rather than setup another application(asterisk-oh323) expect some bugs or failed functions on chan_h323.

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

I'm having a problem with chan_h323 compiling for Asterisk. RedHat 7.3 PWLIB 1.4.11 pwlib_1.4.11.tar.gz OpenH323 1.11.7 openh323_1.11.7.tar.gz [asterisk@jonux h323]# make clean rm -f *.o *.so core.* [root@jonux h323]# make cc -g -pg -c -o chan_h323.o -pipe -Wall -fPIC -Wmissing-prototypes -Wmissing-declarations -DP_LINUX -D_REENTRANT -D_GNU_SOURCE -march=i686 -DPBYTE_ORDER=PLITTLE_ENDIAN

Hi! I'm trying to build gnugk with asterisk. Asterisk is working well with chan_h323 built with needed PWlib v.1.5.2 and open H.323 v.1.12.2. But gnugk' s installing instructions says that I need latest PWlib(1.17.1) and openh323 to get gnugk work. Now, with installed pwlib and openh323 gnugk's compiling fails and I get error 1. Do you have any working solutions with asterisk and

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what