similar to: SIP - Ringback

For the past week or two, our customers who have Polycom phones have been experiencing a problem... but our customers with Cisco phones do not have this problem. The phones in question are: Polycom SoundPoint IP300 (firmware 1.3.1 or 1.3.4) Polycom SoundPoint IP500 (firmware 1.3.1 or 1.3.4) Cisco 7960 (firmware 7.2 or 7.3) The problem is this: when our Polycom users dial _some_ PSTN numbers,

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty

Now this is really frustrating. Everything was working fine, and now it isn't ... I don't think I've changed anything that would affect this, but I guess you never can be too sure. My setup is as follows: SIP softphone (SJphone) connected to Asterisk running my Linux NAT firewall box. This is all on the internal network. Asterisk then dialing out through various means - SIP to

I'm having problems in dialing numbers over SIP that include characters from the UK international phone number conventions. I have my contacts in Outlook, with the numbers represented as: +<countrycode> (<area code>) <numberpart> <numberpart> eg: +44 (20) 7834 1234 or: +1 (801) 555 1234 I'm using the SJphone softphone, doing my testing through the Stanaphone

I have Asterisk running on my LAN with softphone clients (SJPhone) and Cisco 7940/60s, all using SIP. I also have a few remote sites connecting to my Asterisk server. I am getting an echo back of my voice when talking with one particular site. The caller does not hear an echo on their end. All calls on the LAN or to other sites do not produce an echo. When the caller places his SJPhone on

I'm currently using the SJPhone softphone with asterisk for remote SIP. When I dial into the voicemail, and attempt to pass the extension, I "hear" the sounds, but asterisk is not receiving any DTMF signals. If I use the Estera softphone, asterisk does receive the DTMF signals. Normally, I'd just say "Use the Estera" softphone to myself, but that's not an option,

I've got a problem with audio output from the Asterisk console. I'd really appreciate any help. I'm simply trying to dial out to a phone on PSTN. My extensions.conf entry is as follows: exten => _1NXXNXXXXXX,1,Dial(IAX2/####@voxee/${EXTEN}) exten => _1NXXNXXXXXX,2,Hangup After starting asterisk and dialing, I hear a ringback tone through the console speaker, and the PSTN

I know this has been covered more times than to mention and this is where I got most of my info from... But I am having issues with this. I can't seem to get the phone to register with *. This is being tested on a internal network right now. Here is the setup - sip.conf [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context

Well, I think I discovered even further why there is no ringback tone available. The following message, is displayed on the console in asterisk. ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device Failed to register zone 'United States / North America': No data available Looking more into it, I found that it was related to loading tones for a particular zone. The message is printed

Hi, I have the following situation: At a branch , there is a Cisco Call Manager with users all having Cisco phones. Now I put down a Asterisk 1.2.12 box at the branch, which talks H323 via chan_oh323 to the CCM. So calls go from the CCM, go H323 to the local Asterisk box, then I take it via SIP to another Asterisk box. From there I am hooked up to 2 different providers, for Local and

I am noticing that calls that come from our IAX pstn gateway provider and terminate to our Asterisk IVR do not receive ringing when an extension is dialed. For example: 1. An inbound PSTN caller calls our number 2. Asterisk answers and provides greeting 3. PSTN user dials extension of internal SIP phone 4. No ringback is heard from PSTN callers perspective 5. SIP user picks up or the

Here is the call flow: [ivr-incoming] exten => s,1,LookupCIDName exten => s,2,DigitTimeout(2) exten => s,3,ResponseTimeout(10) exten => s,4,Wait(1) exten => s,5,Background(custom/ivr-incoming) exten => 1,1,Background(pls-wait-connect-call) exten => 1,2,Dial(${RINGPHONENUMBERS},20,r) exten => 1,3,Voicemail,u${VMBOX} exten => 1,4,Hangup Running * 1.0.5. The calling party

Hello, Please forgive me if this has been addressed previously. I have been searching the archives and have not come across what I thought was a solution. My * server is behind a DSL router using a NAT IP address of 10.0.0.9. A colleague running XP and X-Lite can register with * from his home, specifying my public IP as the SIP proxy in X-Lite (however this is only true if I have the NAT flag

Good morning everybody, Can someone explain to me the interconnection between these four things: indications.conf, SetLanguage(), zaptel.conf and ring-back ? If there is any !! :- ) I am having this case where some users cannot hear ring back from a DeadAGI script and it seems to be interconnected to these items. These users are from the iaxfriends table, they _can_ hear ring-back from a

Hi, I use in Production : Asterisk 1.2.9.1 We Use Asterisk as a SIP Transit Server to record centrally all the calls. The call flow would be: incoming calls : PSTN -> GW -SIP-> Asterisk(Record) -SIP-> Softswitch -> IP Phone outgoing calls : IP Phone -> Softswitch -SIP-> Asterisk(Record) -SIP-> GW -> PSTN Dial plan in Asterisk is quite simple: [record] exten =>

hi, I am new to * and setting up a test system. here my setup : - debian (from knoppix 3.3) - Asterisk 0.7.1 (from the debian package) - AVM Fritz card used with i4l - softphone I use for testing SJphone on windows - I can make great softphone - softphone calls - I can call from an outside line * and get connected to a softphone here my problem: I can not make outbound calls. I place a call

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

My last problem was nicely solved through this mailing list so hopefully this new problem will have the same happy outcome. My situation is that I have many extensions. Here is a sample: [client-phone](!) type=friend host=dynamic secret=XXXXXXXXXX dtmfmode=auto disallow=all allow=ulaw allow=gsm allow=g723 allow=ilbc subscribemwi=no [4165555555](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxx

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users