similar to: Excellent service from vendor

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

I wrote up report on products that caught my interest at the VON show going on this week in Santa Clara. http://www.voip-info.org/wiki-VON+Spring+2004+Report Jim James H. Thompson jht@lava.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040331/ed747c03/attachment.htm

Is that wifi phone available? If yes how much and when? I am looking to purchase a large quantity of wifi phones. I have a few questions on making calls with these phones and how the accounting of the calls would go. Thanks. Sincerely, Stephen Karrington Dreamtime.net Inc. http://www.dreamtime.net <http://www.dreamtime.net/> http://www.emailblaster.us <http://www.emailblaster.us/>

Asterisk receives TMC Labs Internet Telephony Innovation Award http://www.tmcnet.com/it/0704/tmclabs.htm Jim James H. Thompson jht@lava.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040708/133dbbde/attachment.htm

Looking for WLAN - WiSIP - WiFi phone recommendations and experiences. What works, what doesn't. Thanks. Jim James H. Thompson jht@lava.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040716/2e0d45a5/attachment.htm

Has anyone tried Xten's new eyebeam SIP video softphone with Asterisk? http://www.xten.com/index.php?menu=products&smenu=eyebeam Jim James H. Thompson jht@lava.net

I have seen on eBay adapters for Cisco 7940/7960 phones, to use cell phone headsets. They were about 12-15$. I think original manufacturere was at http://www.ciscoheadsetadapter.com. >Started a Wiki page here: > > http://www.voip-info.org/wiki-Cisco+Phone+Headsets > > >Jim > >James H. Thompson >jht at lava.net > > ----- Original Message ----- > From:

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

Problem: SPA3000 phone does not ring for incoming PSTN call although I can dial out. I set up my Sipura with the Voxilla Wizard which is pretty good but leaves out some important details. The Voxilla Wizard for Supura SPA3000 gave me a setting for PSTN Tab -> Dial Plans -> Dial Plan 8 (<S0:66610>) Should I put extension [66610] in sip.conf with a context in extensions.conf that

We have extra equipment that was over-ordered or unused. All of the equipment is brand new. The equipment has been highly discounted to move quickly - the last set of equipment sold in 48 hours. If this equipment is of interest to you, call or e-mail quickly. Buy on VOXILLA and SAVE $300 each (Cisco routers & switches): http://store.voxilla.com/customer/home.php?cat=259 For Sale (all new):

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

I?ve been tearing my hair out trying to get a Polycom phone (behind a NAT) to register to an * box behind a Cisco SIP ALG. With known good credentials configured on the phone and in *, I get 403 Bad Auth when trying to register. If I put the phone onto the same LAN as * it works fine without changing any authentication parameters whatsoever. If I make the secret blank (null) on the phone and *,

Hi, I wish to know if GNUGk can work with * running as a gateway with the Digium FXO card. Kindly share your experiences in case there are some issues which one must know before going in for such a setup. Also, I've been reading about the DialTone detection capability by the hardware in different countries. What are the issues with it? Thanks & Regards, Deepak ----- Original Message

I have a SPA-3000 that is failing to hanging up pretty often; almost every day now. The weird thing is that an almost identically configured (same FW, different HW rev) second unit right next to it isn't having the same problem. Swap the lines and the problem stays with the unit. I've been going round and round with Sipura and their latest message told me to use a procedure detailed in

Can you folks recommend Asterisk merchandise resellers that have good reputation? So far I didn't have much luck except surfcity.com where I've ordered their P104 phone. I would like to purchase Sipura SPA-2100 and SPA-841 and "VOIP Telephony with Asterisk" book. So far I have poor experience with Voxilla and Asterisk Mall. - Voxilla folks have no clue how to ship Warranty

OK, I have managed to use some of the basic processes of getting data from my DB, passing it as a whole to something like fitdistr, &c. I know I can implement most of what I need using a brute force algorithm based on a series of nested loops. I also know I can handle some of this logic in a brute force method using a blend of perl and R, with considerable file IO. But some of what I need

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works

On Thu, Jan 23, 2020 at 11:10:00AM +0100, LABBE Corentin wrote: > Hello > > When modprobing tcrypt on qemu 4.1.0 I get a kernel panic on 5.5-rc7 and next-20200122 > qemu is started by: > /usr/bin/qemu-system-x86_64 -cpu host -enable-kvm -nographic -net nic,model=e1000,macaddr=52:54:00:12:34:58 -net tap -m 512 -monitor none -object cryptodev-backend-builtin,id=cryptodev0 -device