similar to: Cisco 7960 lockups - any experiences?

Hi, as noone out there seems to be able to maintain chan_sccp, i'm trying to switch to chan_skinny. With the newest 1.4 svn the Softkeys are mostly wrong/non functional. I see Redial NewCall CFwdAll more (more) CFwdBu... GPickUp Confrn more NewCall works, CFwdAll seems to toggle DnD, the rest of the buttons do notting. Any ideas how to fix this? Regards, Andreas

Dear useRs, Some time ago I queried the list as to an efficient way of building a function which acts as ls() but with a different default for all.names: http://tolstoy.newcastle.edu.au/R/e6/help/09/03/7588.html I have struck upon a solution which so far has performed admirably. In particular, it uses ls() and not its explicit source code, so only has a dependency on its name and the name of

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

I have recently upgraded my firmware from v6.3 to v7.4. Now when the phone is booted or rebooted, the initial screen "Initializing Vlan" takes forever to initialize before it initializes IP. Any ideas/Thoughts? (Trying not to Revert back to v6.3). -C -------------- next part -------------- An HTML attachment was scrubbed... URL:

So, I've managed to consistently lock up my Cisco 7960 (SIP 6.1) to the point where it needs to be unplugged, due to software errors. This is a first. My suspicions are that this bug in Asterisk is causing the lockups: http://bugs.digium.com/bug_view_page.php?bug_id=0000889 It seems unusual to me that a low volume of bogus SIP messages should lock up the 7960, but that seems to be the

Hello to all I would like to know If some of you have already configured an Cisco IP Phone (7940 or 7960) to work in a different VLAN than the PC that is connected through the phone switch? I know that this can be done with the Skinny firmware, but I dont if it works with the SIP firmware. The Cisco technical staff told me that these phones dont support 802.1x but can work as pass-through.

Is there a way to make the Cisco 7960 SIP phone dial out automatically without having to press the dial button, once the numbers that you have entered match a specific pattern? This feature is present when the phone is working with a Cisco CallManager. For example, if all of my internal extensions begin with a '5' and are four digits long, if I dialed '5123' on the phone, the

Hi, I'm trying to replace function call with call to wrapper(function_name, num_args, ...), where varargs hold args of original call. Function* launch = Function::Create( TypeBuilder<int(const char*, int, ...), false>::get(context), GlobalValue::ExternalLinkage, "kernelgen_launch_", m2); { CallInst* call = dyn_cast<CallInst>(cast<Value>(I)); if

Hi Dimitry, This makes sense if you think about it from the perspective that the string you want passing must be passed at runtime, and so can't use a const char * from compile time. You need to make the string visible in the compiled image, and use that as the argument. A string is an array of 8-bit integers, so you need to create a ConstantArray. Value *v = ConstantArray::get(Context,

hi, I have to configure Xen server and DomU''s which should be able to talk to different vlans - depending on services put on DomU''s. I would like to enslave 2 NICs via bond interface. Both NICs are on trunk ports which are configured in the same way, the same native vlan. I don''t know, if I have to add vlans tagging to eth* interfaces then enslave tagged eth*

I figured I should post this because before I went to do it I searched the web for caveats etc and didn''t really find much. So anyway, I set up bonding + vlan for a project. Computer is dell powerdge 350 with 2 intel 82559 10/100 nic running stock 2.4.20. I tried both the eepro100 and the e100 drivers for the nics, both work 802.1q and bonding are modules. Switch is cisco 2924xl-en

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Anyone had experience with this phone? The interesting features that caught my eye were the RTP encryption, speaker "pager", and built in 4-port ethernet switch. Of course, RTP encryption doesn't exist in * yet, but it might be interesting (I've had people ask about it, but I don't know how serious they are about needing it.) http://www.zip4x4.com/summary_ZIP4x4.htm

I'm a day-old R newbie (but a war-weary S veteran), with couple of first-day questions: In R 0.61, this code fails. Ops.test <- function(e1,e2) { e1 <- NextMethod(.Generic) e1 } x <- 4 class(x) <- "test" y <- x < 3 The error message is "Error in NextMethod(.Generic) : negative length vectors are not allowed.". I assume it is a bug.

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 2950 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060530/be5cdbe7/attachment.jpeg -------------- next part -------------- A non-text attachment was scrubbed... Name: not available

Does anyone in Asterisk land know how to turn on the message light on the back of the earpiece of a cisco 7960 when a message is waiting? Thanks! Paul Paul Mahler mail:pmahler@signate.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040130/0efacc79/attachment.htm

I know I heard people looking for inexpensive ADSI phones a while back. Can't vouch for these guys, but this looks like a reasonable deal for what perhaps are new phones. No experience with ADSI, myself, but thought I'd pass it along. These folks also carry the Nortel analog units that do intercom and 2-line, as has been discussed in prior threads. JT ---------------------

Hi! Maybe I have just been looking on the wrong pages but there is a question that is very important for me. I already studied some Demo-Dialplans and made some basic experiences with Asterisk. But what I need to find out is how I can handle this. I am leaving my office and I want to tell asterisk to forward calls now to my mobile phone by just hitting a key (on my IP-Phone) or by using a

When I make a call using sip, I get the line NOTICE[327696]: File rtp.c, Line 292 (ast_rtp_read): Unknown RTP codec 19 received Repeated many times on the console ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to ;bindaddr = 0.0.0.0 ; Address to bind to context = outgoing ; Default for incoming calls allow=gsm allow=ulaw

Hello all, I'm having unusual difficulty configuring teaming with Centos 4.2. The 2 NIC's are Broadcom. The HW is HP DL360 and there is no teaming driver for RHEL4 since it comes with package (says HP). Since there is no teaming driver from centos (as far as I know), I tried the Broadcom Driver, configured the team file, but the team just wont come up. A Virtual Interface should be up