similar to: Two Stage Dialing for MF CAMA trunk

Hi all, I'm trying to get a handoff between me and a carrier going using Asterisk. I need to handoff using CAMA signaling. On a Cisco, you can see the configuration types that I'm referring to on this site as an example: http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a008019b16e.html#35393 The example of the interaction is the following: CLEC end

Does anyone have any experience getting inbound ANI information from a CAMA/MF/E&M Wink trunk on Asterisk? Is this only do-able with a PRI interface? Any information would be helpful.

Thanks Brian, and thanks again for the included definitions <grin> - that helped too. Your comments are really helping clear many questions. I suppose our intensions are to become an IXC. So if my local carrier is sporting old technology, they'll provide TDM services. So if I understood you correctly, the "in-band signaling" is typically SS7, and the alternative is typically

Hi, I get an error with 'make check' in version 0.9.1 Testing asynchronous tandeming (44100Hz, 1ch, 240 samples, 8 - 88 bytes). Error: Signal out of expected range. 44100 1 240 8 258.102814 FAIL: tandem-test Anyone else - or is it just me? til

Hi! My mail server works in tandem: Dovecot (IMAP) + Postfix. How can I configure in Gmail: Outgoing email copied to the Sent folder using postfix without mail client? This question is for the mailing list for Postfix? Mail client itself copies outgoing messages in the folder Sent, but the messages are large, and the server is far away. And to transmit email twice for sending and copying is

Hi, I'm currently testing libcelt (celt-0.9.1) on my Openwrt/Kamikaze RDC-3210 platform and although I'm able to Crosscompile on my Ubuntu 10.10 machine without errors, the resulting celtenc doesn't seem to work properly. Ran ./configure via the Openwrt makefile first (activating fixed-point) ; I first produce a S16_LE Raw PCM file (48Khz, stereo) : test.pcm Then I try to encode

Hi , We've downloaded the CELTV0.11.1 source code from celt-codec.org . But having trouble with mathops-test and tandem-test unit test that exercises internal components of CELT codec, please find attached document for each test case failure in details. Also could you please give some inputs on CELT Low complexity code and full version of the code, point me source code to CELT

Goodmorning everybody, I need to run an R program via SSH. Usually I open R, I run the program and I stay logged-in, waiting for the output. As a matter of fact, if I close the connection with SSH I loose the calculations and the output of my R program. What command I have to use in order to preseve the calculations and the output without staying logged-in a SSH connection? thanks in advance

I'm presently working on an office move and evaluation of telecommunications services needed at the new location. I'm presently wrastling with an issue related to portability and geography between landline carriers. Presently certain people within the organization are hopelessly in love with our 909-822-xxxx number(provided by pacbell/att). As that number is presently provisioned it

Hello, This request was initally sent to the -dev list, but I was advised to try rather here, thanks Steve. Here is the story: I was asked by a call center company to find a solution of an affordable multichannel system for recording their agents calls. Their basic demand is to handle recording of up to 60 simultaneous telephone calls. There are many sophisticated recording systems available

For anyone using both and encountering trouble with stylesheets (specifically, the paths being incorrect in production mode)... Removing facebooker solves the issue. But I bet you don''t want to do that, eh? So, simply setting ActionController::Base.asset_host = '''' also works like butter. I''m not 100% clear on why asset_host has anything to do with

Pardon my ignorance, but I was hoping someone could clear up something for me. - For a few POTS lines, digium has a single port card for that, or a T1 card to a channel bank. - For 10 or more lines, digium has a T1 or E1 card for that too based on PRI channels - For 100's to 1000's of lines, I suspect a soft-switch is in order??? A traditional phone company will sell: - POTS lines for

Maybe of you guys know the answer to this: We have T1's that come from both MCI and Global Crossing as channelized (24 Ports per T) with inband (DTMF) delivery of ANI and DNIS (format = *DNIS*ANI*). My old equipment was set for D4, AMI, SF and Wink Start and so is Asterisk. I've moved these T's to Asterisk TE410P and inbound calls are arriving to external voice mail system

Maybe of you guys know the answer to this: We have T1's that come from both MCI and Global Crossing as channelized (24 Ports per T) with inband (DTMF) delivery of ANI and DNIS (format = *DNIS*ANI*). My old equipment was set for D4, AMI, SF and Wink Start and so is Asterisk. I've moved these T's to Asterisk TE410P and inbound calls are arriving to external voice mail system correctly

Hi I have written a whole bunch of methods for objects of class "octonion". [ an octonion is a single column of an eight-row matrix. Octonions have their own multiplication rules and are a generalization of quaternions, which are columns of a four-row matrix. ] So far I've done about a dozen generic functions such as seq.octonion(), rep.octonion(), [<-.octonion(), and so on

Has anyone successfully used a kickstart file in tandem with the "virt-install" command? I can get a generic install to begin if I omit the "-x" flag and the kickstart parameters? It seems that virt-install simply ignores my kickstart parameters. virt-install --location=http://www.gtlib.gatech.edu/pub/centos/4.5/os/i386/ --noautoconsole --file=/dev/VolGroup00/lv_centos45

has anyone managed to get get in_place_editor and file_column to work in tandem ? I am trying to allow someone to edit a photo in place, but not sure if this is possible. adam -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060518/487d5fee/attachment.html

I sent a query about this before, but have some further information and am hoping somebody has a suggestion as to what to try next to debug this. I'm using an Asterisk box primarily for MeetMe conferencing. There are two sources: TDM via two Q.SIG T1's and SIP phones. Conferencing works fine between TDM channels. But when a SIP phone calls the conference, there's no voice path *to*

All: Another thing I've always noticed is that the sources & source_connections stats become incorrect if the sources connect at the ''exact same time'' ?? The reason I say this is the OddCast encoders as I've mentioned in previous postings acting in a Chain, have the same "reconnect" timer (of '2 seconds' on modern hi/lo, '4 seconds' on

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, 22 May 2014, Dmitry Podkovyrkin wrote: > My mail server works in tandem: Dovecot (IMAP) + Postfix. > How can I configure in Gmail: Outgoing email copied to the Sent folder using > postfix without mail client? This question is for the mailing list for > Postfix? > Mail client itself copies outgoing messages in the folder Sent,