similar to: IAX error messages in log

I have an issue where * tries to route a call over IAX to another server even if the server is down. I have included the relevant entries from my iax.conf, extensions.conf, and some debug output. If someone could tell me what I have configured incorrectly, I would appreciate it. Thanks, Stephen -----------iax.conf on voip2---------- [voip1] type=friend username=voip1 host=x.x.x.x (ip

Hi, I just upgraded from 1.2 to 1.4. In 1.2, when I did a "show uptime" I used to see a second line telling me the time since the last reload. Has this been removed in 1.4? The following is the output of my two test boxes: Connected to Asterisk 1.4.18.1 currently running on voip2 (pid = 10605) Verbosity is at least 3 voip2*CLI> show uptime System uptime: 15 hours, 55 seconds

Has anyone seen this before? This channel is consistently present on both of my asterisk servers. Sometimes they disappear for a few seconds and then come back. It always has the same Call ID. voip1*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.168.0.102 (None) df92fb1b-8a 00101/03059 00000ms 0000ms UNKN

My VoIP provider allows me to have more than one call outbound on the same line simultaneously, for some reason. I am pretty sure that they do not want this to happen, so I'd like instead to limit each line to one call. I do not want the users to have to dial another prefix to go out on another line. Is there any way to add multiple accounts for my _9. extension and have Asterisk

Hi I have an account with mynetphone (australia), which gives me two voip (sip) accounts, which i used to have connected to a spa9000. this is behind a firewall, so on the spa9000 I would listen on another port apart from 5060. so on the firewall 5060 would go to voip1 and 5061 to voip2. I moved to asterisk (+tdm410) and the machine was also the firewall and I had no problem - well atleast it

Hello, I'm french, so excuse my poor English. I'm face to a terrible thing, with has stole a lot of my time. On the .184 machine, I've the following iax.conf : [general] rtcachefriends=yes bandwidth=high tos=reliability jitterbuffer=no autokill=yes #include "iax.voip1.conf" #include "iax.renoir.conf" The iax.voip1.conf file contains : [VOIP1] type=friend

I am having trouble getting Asterisk to compile the zaptel stuff. Here are the specifics: Linux Kernel 2.5.9-42.0.8.EL Asterisk 1.4.0 I compiled libpri, zaptel, asterisk and asterisk-addons (in that order). This is a fresh install of CentOS. Following the CentOS install, I did "yum -y update" until there were no updates left. Here is my src directory: drwxr-xr-x 24 root root

I'm looking to use * for a HQ/branch office topology with fairly few calls over the WAN. The questions I have all pertain to the following architectural pic: http://www.45891.com/misc/arch.jpg I'm looking at a distributed architecture so users are somewhat functional when the link to HQ is down, with a centralized voicemail server to allow for transfer of voicemail messages from user to

This *should* be something that's easy to fix, but apparently I'm not doing something right. Our SIP long distance provider is telling us to only use formats G.723 and G.729, so I've set up their trunk configuration in sip.conf as such: [t564] type=friend host=XXX.XX.56.4 context=default disallow=all allow=g723 allow=g729 However, the Dial application gives the following error:

O, try the following.   Test this first. ldd /usr/sbin/hfaxd  if you getting libpam.so..  something, then hylafax is compiled with pam support.   Next,   apt-get install libpam-ldap   ( just to be sure, i do believe you have installed it already )   create the file :  /etc/pam.d/hylafax Add :   auth         required       pam_ldap.so account   required       pam_ldap.so

Hello list, I notice that the dialplan method SIPAddHeader is not working : in dialplan : /exten => s,n,SIPAddHeader(Privacy: id)/ in SIP invite no trace of this header : /INVITE sip:0473 at sip.domain.be SIP/2.0 Via: SIP/2.0/UDP 192.168.1.106:5063;branch=z9hG4bK-5b2b1b97 From: "VC" <sip:voip2 at sip.domain.be>;tag=729476652f511c67o2 To: <sip:0473 at sip.domain.be>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I posted this also on hylafax list - maybe here is someone with a hint. System: Debian Jessie, Hylafax-Server 6.0.6, pam 1.1.8, libpam-ldapd 0.9.4, nslcd 0.9.4 (all actual debian packets from stable), sernet-samba-*-4.2.7-8 After a switch from OpenLDAP to a Samba 4.2 based LDAP Server, I cannot auth users anymore in Hylafax, everything else

Hi all, Today I got problem below and my domU become unresponsive and I should restart the pc to make it running properly again. [ 240.172092] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 240.172110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.172376] INFO: task jbd2/xvda1-8:153 blocked for more than 120 seconds. [ 240.172388]

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

Here is my Configuration PSTN -> Cisco AS5350 -> SIP -> ASTERISK -> SIP -> ATA186 When I call from the pstn to the ATA, the ATA rings but I don't hear anything on the calling side until the call is picked up. When I call from the ATA, everything seems to work fine. When I bypassed ASTERISK, everything seems to work fine. Anyone know what I might have configured wrong?

Hi, Sometimes my asterisk server stops. (after a day or two) Last output from CLI is: -------------------------------- -- Registered SIP '000b82017eb7' at 213.237.12.125 port 11620 expires 120 -- Channel 0/26, span 1 got hangup -- Hungup 'Zap/26-1' voip1*CLI> Disconnected from Asterisk server Executing last minute cleanups Asterisk cleanly ending (0).

I am seeing strange behavior that I don't understand. Voicemail2 and voicemailmain2 work fine if I call from a sip phone directly connected to *, but if I call either of them from an analog line on the other side of a sip gateway, voicemail seems to ignore digits. If I am recording a message and press #, nothing happens except that it records the tone onto the message and I can't specify

I have the following pair of macros defined to handle outbound calls from *. Rather than specifying full dialstrings in the main body of extensions.conf, outbound dial commands are made using a macro call as follows: Macro (outbound,number_to_dial,callerid_to_present,gateway1,gateway2,gateway3,gate way4) The final gateway defined is nearly always a fallback to PSTN if none of the IAX or SIP

<P>Has anyone managed to get Asterisk to work with Glophone/Voiceglo since this posting.</P> <P><A href="http://lists.digium.com/pipermail/asterisk-users/2004-February/036559.html">http://lists.digium.com/pipermail/asterisk-users/2004-February/036559.html</A></P> <P>I've tried copying the config in this listing with no success. </P>

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'