similar to: IaxTel seems down

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

I'm trying to run some inbound test to my Asterisk box using Telesthetic's gateway in MI to my GNU/IAXtel account. Am I missing something? I set up my user account on the GNUPhonne site, configured Asterisk to talk to IAXTel. * registers fine. In fact I can make calls to other test users. I haven't tried having someone call my number. When I call into Telesthetic's exchange

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

Hi, The Win32 binary of Gastman crashes on Windows 2000 SP4. Same case on all my machines, no error, no log. Although, the CVS version works great on Linux. Is it anybody who knows how to compile it with mingw32 ? Or better, could anyone, who already has mingw32 installed, make a binary snapshot ? Thanks in advance, Jean-Christophe -------------- next part -------------- An HTML attachment was

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Hi all, I have developed a full featured Windows IAX phone based on LIBIAX library . It is now in a prerelease version (0.9.0) and you can download it for free from my web page: http://www.laser.com/dante or http://www.geocities.com/tdanro Some of the features are: - registering with Asterisk PBX; - can use any audio device as ring device (including PC speaker), independent of the play device;

Is anyone running Asterisk under Fedora Core 1 (http://fedora.redhat.com/)? If so, did everything with Asterisk work properly? I'm looking to migrate from Red Hat 8.0 to Fedora this week. Thanks.

<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT: blue 2px solid"> <DIV>Hello,</DIV> <DIV>&nbsp;can someone tell me what's wrong with this? I can't make toll free calls via iaxtel. Here's the definition in my extensions.conf</DIV> <DIV>&nbsp;</DIV><FONT size=2> <DIV>[iaxtel-trunks]</DIV>

Ok folks I have another question. So far I have gotten my IAXTEL number and I have been able to make calls from my asterisk system to any IAXTEL number and even to FWD numbers. I also got FWD to work and I now can get calls to my main system. It's great when these things work. But when I call my own IAXTEL number 17005441100 all I get is a message saying the user is un registered or un

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

I signed up for an IAXTEL account and have been trying, unsuccessfully, to get it working. In IAX.CONF I have: [iaxtel_out] type=peer host=iaxtel.com username=USERNAME secret=SECRET auth=rsa inkeys=iaxtel [iaxtel] type=friend context=incoming host=iaxtel.com auth=rsa inkeys=iaxtel However, when I start Asterisk, I get the following warning: [chan_iax2.so] => (Inter Asterisk eXchange

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

Does anyone know if the 1-800 iaxtel gateway is down? I've been trying to use it all day today and asterisk says it's ringing: Channel (Context Extension Pri ) State Appl. Data IAX2[iaxtel]/1 ( s 1 ) Ringing AppDial (Outgoing Line) SIP/2201-a253 (home 18888476626 1 ) Ring Dial IAX2/XXX:YYYY@iaxtel.com/18888476626@iaxtel But I

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

Is anyone else having trouble receiving IAXTel calls? I don't know if it's my config that's broken or IAXTel that broken. Several people have given me their IAXTel numbers and calls to them all fail. I can call FWD numbers via IAXTel just fine. --Eric -- Sample configs, scripts, more : http://www.fnords.org/~eric/asterisk/ BTEL Consulting 504-899-1387 or 850-484-4545 or

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hi All, Is this working for any of you? We're supposed to be able to dial FWD accounts through IAXTel by dialing 170099+FWD number. I don't ever seem to be able to do this even though I can dial 800 numbers through IAXTel. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc.

I am using IAX soft clients (firefly, IAXComm, IAXPhone) from a Win2K machine on a NATed private LAN to connect to my IAXTel account. All of my calls to outside numbers(1-800, 1-877, etc) seem to be disconnected after 9 seconds. Has this limit been placed on IAXTel? My call to the echo test number at 1-700-999-9613 seemed to run for as long as I wanted. --