similar to: PRI maintenance commands

Can T400P be configured for nfas (one d-channel providing signaling for more than one span)? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030522/f2b637a9/attachment.htm

Hi Steve and all, 1. Faxing from asterisk back to the same asterisk (from one Zap channel to another) doesn't work for us. Txfax called with the 'caller' parameter issues CED, while the receiving side needs CNG in order to switch to fax extension with rxfax. 2. This is probably the reason why J2 and our UC don't recognize incoming fax. Thank you. Alex Zarubin Webley Systems

Hello, The v1-0_stable cvs release doesn't include the recent change ('poll' instead of 'select') in channel.c. Will it end up there any time soon, or we need to use cvs head to pick up this change? Thank you. Alex Zarubin Webley Systems -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi We are having a significant (> 1 sec) delay in a multi-asterisk conference, with IAX2 legs connecting meetme on different boxes. All the other legs are PSTN (TE410P). The example configuration Slave box 1 meetme <--- IAX2 ---> Master box meetme <--- IAX2 ---> Slave box 2 meetme The delay is between Slave box 1 and Slave box 2 The primary suspect is our iax configuration

Is there a way to play adpcm, 6KHz in asterisk? If yes, where can we get this codec? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030916/b8be2453/attachment.htm

If there are multiple NICs in the box, how do we specify the local IP address to be used for RTP? Anything in rtp.conf ? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030609/d151f190/attachment.htm

Hello, CVS 07/31/03. Test with 130+ PSTN-to-SIP calls. Asterisk gets locked ... grep -e "Error" -e "eventually" p-console chan_sip.c line 1453 (sip_alloc): Error obtaining mutex: Device or resource busy chan_sip.c line 1453 (sip_alloc): Got it eventually... chan_sip.c line 1453 (sip_alloc): Error obtaining mutex: Device or resource busy chan_sip.c line 1453 (sip_alloc): Got

Anybody have suggestions on having a 56K dialpool and VOIP connections with an Asterisk box over the same set of PRIs? We've done the PM3 with PRIs for just dialup, but are looking for a way to integrate our Asterisk box and move our voice calls onto the same PRIs. Ian -- Ian White Victoria Free-Net Association email: iwhite@victoria.tc.ca http://victoria.tc.ca/

Hello, If I understand it correctly, when sending INVITE, o= and c= sdp fields are built using p->ourip IP address. At this point RTP packets will be coming to the default asterisk IP address. For the machine with multiple interfaces this could be not the right one (not what we want). Could it be configured (in rtp.conf or in sip.conf per context) ? Thank you. Alex Zarubin --------------

I currently have a single PRI however we are getting a second PRI, and the provider (qwest) wants to know if our PBX supports GSAS (they say its a redundant d-channel technology but searching on google for GSAS reveals less than nothing). I've set something similar up before on a cisco 5350, where if one of the PRIs fails, all of the calls destined for either PRI will be routed down the one

Hello, I've found a little documentation on voip-info and on the asterisk- users list, although I was hoping for an example of a tried-and-true failover setup between PRI and SIP. We are an outgoing call center that uses asterisk 1.4 connected to 2 PRIs from the local telephone company in one group (g1) and a SIP trunk from bandwidth.com. The PRIs are the primary outgoing service,

I've got a system I'm putting together to handle IVR calls with * I have one head system that terminates two PRIs. It routes the calls from the PRIs to * boxes using IAX I'm planning on having four or five * boxes. The * boxes run AGI scripts to process the IVR calls. Can I load balance the routing if I have five calls each of the IVR * boxes gets two call and the next call would go

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

hI, Trying to understand how to setup two PRIs in sip.conf. Using Asterisk 1.4.23. I have a provider giving me two PRI (different rate centers) through SIP. Both PRI comes in from the same IP on the provider side, but go to two different IPs (both on the same box) on my side. How can I setup two different SIP peer, one for each of the PRIs I get, if all I can use to differenciate them

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Does anyone have any recommendations on how to connect 160 analogue phones to an asterisk PBX? Background information: A client wishes to replace their current PBX with a new VoIP system. Currently they have 2 PRIs. I intent to set up 2 asterisk PBXs with Debian GNU/Linux on raided drives. These drives will be mounted only read-only to recover gracefully from power-cycles. I am considering 2

We would like to present a toll free CallerID when making outbound toll calls. In the past, when our PRIs were directly connected to a Nortel CS1000 we could do this, without issue. Now that the PRIs are front ended by a mediagateway facing asterisk, we can no longer do this. Is it possible to set the billing number via a SIP header and set what should be presented as callerid as another header

Dialplan stopped working after I did cvs update for zaptel-zapata-libpri-asterisk and 'make clean', 'make', 'make install' for the above components on 04-15-03. All the config files are the same as before. Both PRI and SIP calls I am making forward calls to 's' in the default context. Fields 'from' and 'to' look normal. My attempts to fix it by

Hello, Question for developers: what is the asterisk way to integrate with ASR (speech recognition)? Question to the community: has someone done anything in this direction? On the first glance that shouldn't be too hard. One part is delivering audio to the engine (for example, main ASR players Nuance and Speechworks will be happy with RTP) - can be done via RTP forking. The other part is

Hello, We are moving from an older asterisk/SIP to a newer (18+) asterisk/PJSIP and trying to figure out how to add [identity] header when originating a call from AMI/PAMI. In the older version we would just set a variable like this: $action = new OriginateAction("SIP/...."); $action->setVariable('__SIPADDHEADER51',"Identity: $identity"); // $identity