similar to: Distinctive ring confusion

I have a line from BT (UK) connected to my asterisk system, on a TDM400P. I am able to see either distinctive ring cadences or caller ID but not both. If I try to enable both, all drings show up as 0,0,0. This is a pain because, if I make a call out over that line and the number I call is busy, I can elect to camp on it (ringback), which results in a different cadence of ring when the called

Hello All, I am looking for a way to do priority call ringing. That is when a caller places a call to another party, they can indicate that the call is a priority and get a different ring to occur (ring cadence) on the called parties phone. This would be synonymous to an intercom ring on a key system. After some investigation, I have come across the ability of the GS BT101 which will ring

I'm using Asterisk 1.4.5 (will try 1.4.6 on Thursday, but I don't see anything in the changelog after the 1.4.5 release dealing with distinctive ring), zaptel 1.4.3, and wanpipe 2.3.4-10 with a Sangoma A200 card. I enabled usedistinctiveringdetection in zapata.conf. However, on the Asterisk console, the output I get is: -- Detected ring pattern: 0,0,0 It would appear that Asterisk is

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

Hi All, I was wondering what the status of distinctive ring support in Asterisk is? I had a google search & read and Mark Spencer wrote some support for it. Is distinctive ring different in every country or is it pretty standard? And for my final question, does the Wildcard FXO card support distinctive ring? Essentially what I'm trying to do is route incoming calls with ring #1 to,

I am trying to get distinctive ring to work on my PSTN with no luck. I can get 2 different ring codes but it skips the context assigned... here is my complete zapata.conf: [channels] signalling=fxs_ks usecallerid=yes rxgain=1.0 txgain=1.0 language=en context=default usedistinctiveringdetection=yes dring1=134,0,0 dring2=137,0,0 dring1context=internal2 dring2context=default

Hi All... Is it possible to cause asterisk to answer some distinctive ring patterns but not others? I have a POTS line plugged into an X100P and I would like * to ignore one ring cadence that is answered by a fax machine. How would I do that? Thanks...

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

This is an Australian situation. I have a PSTN connection that has CLID presentation enabled and has two numbers assigned to it, the primary number with the standard ring cadence: 400,200,400,2000 and the secondary number with the alternative cadence: 200,400,200,400,200,1600 CLID presentation is working fine and in zapata.conf I have: usecallerid = yes usedistinctiveringdetection = yes I am

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short

In my extensions.conf file I'm attempting to distinctively ring one of my zap channels with a different ring depending upon whether the call is received from the DID or inside extension. The DID extension looks like so: exten => 5551236543,1,Dial,Zap/28r1|20 However, when I dial in on the DID the phone is not ringing at all. The CLI shows that Zap/28 is ringing and you can hear it

I'm looking to give the SPA-3000 a whirl as I'm having too much difficulty with the irq sharing thing inside the box. I'm reading the book but without having one in-hand to play with it appears a little obtuse at this time. Before I drop down my money can someone with some hands-on with one of these confirm if the SPA-3000 can: a) detect inbound distinctive ring (this looks to me like

Hello - I have a TDM400P with 2 FXO and 2 FXS modules. Feeding the FXS modules are two VOIP lines which are terminated by VOIP adapters and have regular RJ11 wires connecting to the FXS ports. Since the two different VOIP lines have different phone numbers, and I know and can tell asterisk which VOIP line is connected to which FXS port, can I cause a distinctive ring on the extensions if a call

Hi All, I've recently got a "second" number installed on my PSTN line, trusting the Asterisk distinctive ring detection would work as expected. It appeared to work fine at the start, as the second number generated a different ring pattern to 0,0,0 (in the console) only to realise that almost every phone call to this "second" number generated a different ring pattern.

Using distinctive ring detection with bell202 cid, is there any way to tell DAHDI to sometimes expect the cid after the 2nd ring, other times after the 1st? I just added RingMaster service (2nd DID w/ distinctive ring) to a TDM800P FXO line. No problem setting dringcontext for the 2nd DID. The 1st DID works normally, but I get no CallerID on the 2nd because the call is picked up before the

I have been looking into how to setup distinctive ringing on a SPA-2100. So far the only thing i have been able to find is how to define a distinctive ring in the spa config. What i cannot figure out is what SIP message i need to be sending to it in order for it use the ring. I did find out how to add the sip message for distinctive ring i just dont know what variable needs to be passed in order

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

PSI System Admin-Message-ID: <112664837810704203@ns1.psinetworks.net> Hi list members, I'm sure this question has been posted before but I am still unable to find the answer. I have a TDM 400P line card and I would like to set it up to IGNORE the distinctive ring pattern that I have for a fax machine. Many thanks Brad

Hello all! We have a PSTN line with four numbers calling into it. There is distinctive ring on these lines. They are are follows: 1. standard ring 2. short ring 3. long ring 4. short ring, long ring, short ring Based on the information I have been able to find, I have created the following entries in my zapata.conf file, to try and weed out some of the timings: dring1=95,0,0