similar to: g723 to g723 SIP call - warning message

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

Hi, I was able to connect asterisk to iconnect's service. It took me almost two hours, but it's because I was having NAT trouble. I finally discovered that you can set the iconnect host to natrealy.deltathree.com to make it work. (for those of you who, like me, don't have the time to search the archive I'll provide a working sample in a minute) My problem was sound

hi, i have connected a SNOM 200 to the asterisk. here are my settings, Codecs ------- Default codec - g.711u/g.711a Packet size - 20ms Negotiation - Interoperable Type - 160 DTMF ---- Inband - negotiate Outband - negotiate Payload Type - 101 when a call comes to the SNOM or when making an outdial, following warning messages are coming on asteisk, WARNING[1209214400]: File dsp.c, Line 1198

I am going to have to find a fix for this problem or I'm going to have to quit using iconnect. About one call in 10 or so, iconnect's gateway gives me an error (console output appended below). So upon receiving the error, which as a 4XX error means, "Fatal," asterisk gives up and drops the call. But not iconnect!! The phone at the other end starts ringing, and rings

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

What does it mean ?? WARNING[265236]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames WARNING[265236]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames WARNING[265236]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames -------------- next part -------------- An HTML attachment was scrubbed... URL:

Just wondering whether we have a resolution to iconnect incoming problem, which started few days ago. Cheers SW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040808/ecc99c4a/attachment.htm

Hello all, I have a 7960 registered to asterisk. I am trying to use iconnect as my sip provider. When I send an invite to delta-three, I get the normal INVITE - 407 - INVITE exchange. The problem is, asterisk is sending the second invite using the 'dialed number' from the 7960 as the username, and not my 'username' configured in sip.conf. I believe that digest authentication

hi all I'm being spammed by these messages in the console (see below) and sound doesn't work with today's cvs. I rolled back a week, and it works fine. In addition to the sound problems, I had to enable inband dtmf squelch on the dilnk mgcp phones. if not, each pressed key was counted twice NOTICE[245776]: File chan_mgcp.c, Line 710 (mgcp_rtp_read): MGCP ast_dsp_process

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

hi ! I have asterisk with Licensed G.729 codec enabled. Whenever I make a call using this codec a warning apears as, WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hi folks, I want to fix hole in my asterisk set up. I use Vocal as my sip proxy and * for voice mail and the g/w to PSTN, Iconnect, fwd etc. So from Vocal I redirect sip requests which needs to go 'other' places. This senario works fine. Now the issue is someone else running a vocal or another SIP proxy can redirect his calls to my * as well. Those calls two will come through general

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Hi, I'm having two problems. First - I'm using the xten x-lite program to communicate with asterisk, and everything works fine except that DTMFs are not transferred. I've set DTMFMODE to inband on both the sip.conf file and the x-lite configuration, and still it doesn't work. Anyone had this problem before>? Second thing: I get a WARNING:[1209214400]: File dsp.c,

Has anybody out there tried to use two different iconnecthere accounts with Asterisk? What I want to do is use a second account if the first is busy. I have tried the following: exten=>_91NXXNXXXXXX,1,StripMSD,1 exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION@iconnect ;iconnect is the first account exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION@iconnect2 ;iconnect2 is the second account But that

Is there a service like iconnect that does allow dialing out more then one concurrent connection? Asterisk works great with iConnectHere, but they only allow one call at a time. I don't want to setup an account for each concurrent call, because it will make iConnect an expensive service, and besides, all of our calls combined doesn't reach 1000 minutes per month. Any ideas?

Hi guys i signed up to iconnect a few hours ago to try do some cool stuff. but im having a few problems. Im running asterisk and xp/xlite softphone.. both xp box and asterisk box are on public ips. The problem is that when i ring anyone in the world it'll ring they'll pickup and i can hear them 100% perfectly/clearly.. but they cant hear me.. occasionaly they can hear something like a

Symptoms: when calling my iconnect phone number (13033913323 in my bogus example below) from my cell phone, I can see that the call makes it to my asterisk server, and my phones even ring once as * passes the call through during the "180 Ringing" period. However, it seems that iconnecthere.com cannot see my "100 Trying" and "180 Ringing" messages, as they