similar to: iax vs iax2 question

Been meaning to ask this for some time... no big deal, but curious. I have a single register statement in my iax.conf for iaxtel like: [general] port=5036 register => npi:mypassword@iaxtel.com <snip> However, when I restart *, I see: Registered to '69.73.19.178', who sees us as 205.221.193.101:5036 Registered to '69.73.19.178', who sees us as 205.221.193.101:4569

Think I'm a little confused on registering an iax connection; could someone enlighten me? I guess the real question is... when two * machines are going to rely on an iax link (each with their own dial plan), do both machines have to register with each other (eg, both need a 'register' statement)? Or, will a single machine doing the registering cause the opposite machine to recognize

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

Hello all, Recently I purchased an QuadBRI card from junghanns.net after some playing around, reconfiguring dialplans etc with the exception of 1 thing everything seems to work: I seem to be unable to set the outbound callerid. The dutch telecom operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past years I'm more then used to setting the MSN without the leading 0, this

Can someone point me to some reasonable example / starting point to implement a basic IVR menu? Looking for something rather simple like the press 1 for sales, 2 for tech support, and probably an option to list the voicemail directory kind of thing. Nothing elaborate needed, just basic menu. (Yes, I did look at the wiki and google searched for "ivr menu".)

Only a warning, and doesn't seem to do anything bad. But I can't seem to figure out what these warnings mean? -- Requested transfer capability: 0x00 - SPEECH [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: k [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: o [Feb 17

I'm testing an ivr implementation (first time) using: exten => 620,1,Wait,1 exten => 620,2,Answer exten => 620,3,DigitTimeout,5 exten => 620,4,ResponseTimeout,10 exten => 620,5,Background(npi-greeting) ; "Thanks for calling press 1 for" exten => 1,1,Goto(npi-directory,s,1) For initial testing, I've arbitrarily mapped this onto ext 620 (will change that later

Hi, I have this setup: E1 PRI PSTN -- Asterisk -- Alcatel PBX - analog phones Can someone tell me what's wrong with this call initiating from an analog phone connected to Alcatel PBX? It dies with NOANSWER but all works if I call other destination numbers. Dialplan is a simple Dial(zap/g1/0984465691) statement. At the end you'll find also zapata.conf.

Hello Julien, Am Mon, 14 Jan 2019 22:15:47 +0100 schrieb Julien dupont <marcelvierzon at gmail.com>: > ** Test 1 ** > On VPN_office I use 'tcpdump -npi any icmp and host 192.168.1.3' > When pinging 192.168.1.1 from client 1, with no success, I see no packet > passing. Sorry - the tcpdump command should end with "192.168.1.1" instead of

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

I have a PRI link up and running between Asterisk and a Nortel Norstar MICS v4.1 . I'm having a problem getting the textual Caller Name across the link from Ast to Ns, however numeric Caller ID arrives and displays fine. From Ns to Ast both elements come through fine. I'm forcing dummy values for testing using: exten => s,1,SetCIDName(Test) exten => s,2,SetCallerID(1234561234)

Hi All, I have installed a number of Digium G100 devices in many countries like South Korea, Japan, Singapore and Australia. I have just installed two in New Zealand and both sites are having a problem with Caller ID. Incoming calls are dropping the first digit 0 from the caller ID. I was previously using DAHDI and a TE121 device which may have been adding the 0, I'm not too sure about

Hi all, using latest asterisk-svn I want to reflect an video call incoming via an PRI EuroISDN channel to another outgoing PRI channel, and I want the the outgoing channel to have the exact same bearer capability < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) < Ext: 1 Trans mode/rate:

Hi, When we make an outgoing call on ISDN (zaphfc) with overlap dialing we get immidiate hangup after answer. But when we place a full number before dialing everything is ok. Any help appriciated!! Thanks here is info with debug: == Primary D-Channel on span 1 up -- Executing Dial("SIP/200-164c", "zap/g1/|100|tc") in new stack -- Making new call for cr 192 --

When receiving multiple calling numbers via a PRI for a call setup, I cannot find the ability to select between either first or last. Is there a way to do this currently? If not, can anyone help me in getting this to work? Here is the dump of the PRI in intensive debugging. Please note that I want the first calling number, not the last. Any help would be much appreciated. Below the PRI trace

I have connected asterisk 1.0.7 with Avaya Definity via E1 with a TE100P Digium Card. Inbound calls are working perfectly and I dont have any problem. But when I try to make an outgoing call with my softphone (xlite) I am getting the following messages. Hungup 'Zap/13-1' Executing Dial("SIP/IZ-bc0a", "Zap/g1/3118") in new stack Called g1/3118 Channel 0/1, span 1 got

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

Hello, Configuration: Asterisk CVS HEAD 20050730 on RH EL3+ DIGIUM TE110P PRI card + euroISDN E1 I am trying to sort out the problem: 1. Provider's switch sends "SETUP"; 2. Asterisk receives "SETUP", rings allocated extension but does not send "Setup acknowledge" (or any other messages) to switch; 3. After 4 seconds of waiting of *'s response switch sends

Hi all, I have an asterisk-server (cvs-head from august) connected to a carrier's switch (DMS/Euroisdn) via a te410p, and I am having problems with DDI (standard 'official pstn' number plus extra digits for 'internal' use) Basically, when the entire number (including the extra digits) is dialled via a redial or a programmed key, I see the entire called party number (including

hi! I need to pass the CLI for my outgoing ISDN PRI call from * box. here's the ISDN protocol debug. Q.931 > Calling Number (len=10) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) > Presentation: Presentation permitted, user number passed network screening (1) '123123' ] > Called Number (len=12) [ Ext: 1 TON: Unknown Number