similar to: iconnecthere incoming

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Hello All, I have gone thru all the resources I could find on google on asterisk + iconnect and managed to get outgoing calls working. However, I cannot get incoming calls to work at all. With the sip debug on, I can see that something is happening everytime a call is received from iconnecthere, but I get an invalid tone on the caller side. The call never rings anywhere on the asterisk. Would

Hi. I cant make SIP calls from asterisk. When I start asterisk, I get the following message: What does it means?? Asterisk is not behind NAT or Firewall. ---------------------------------- [chan_sip.so] => (Session Initiation Protocol (SIP)) == Parsing '/etc/asterisk/sip.conf': Found Sep 16 09:52:33 WARNING[16384]: chan_sip.c:8477 reload_config: Unable to get IP address for

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Does Asterisk support Radius accounting?.... -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] En nombre de asterisk-users-request@lists.digium.com Enviado el: Lunes, 17 de Noviembre de 2003 12:08 p.m. Para: asterisk-users@lists.digium.com Asunto: Asterisk-Users digest, Vol 1 #1912 - 11 msgs Send Asterisk-Users mailing list

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

Quick question for the experts: I'm seeing stuck SIP channel(s) scheduled for destruction stay open. This appears to happen after (apparently successfully) registering with a SIP peer. Any ideas where to start digging into this? I'm running today's CVS, however the problem existed before and does persist. Thanks, Kai-Uwe Example: (registration with iconnecthere.com) ast1000*CLI>

Hi All, I can only seem to get iconnecthere working with incoming calls intermittently. One minute it seems to work, and the next it doesn't. I am not aware of anything being changed in the config files. Outgoing calls work ok all the time. The Asterisk box is behind NAT so that does complicate things slightly. However, the Iconnecthere PCPhone client software works perfectly for

silly me, I thought the inbound would be the hard part. how little I knew... can someone please give me any insight into why outbound is not working, in fact why trying to enable outbound fouls up everything? I'm using asterisk, most recent from cvs, I'm behind a nat, and I'm trying to use iconnecthere.com for outbound and inbound. Inbound is working fine, no problems. But for

This may be slight off topic, but perhaps it has relevance: My iconnecthere account no longer works for "inbound" calls through NAT using the standard configuration that they provide on their website. I have sent them a message, but I believe it will be flushed down the toilet by the first-tier support people. When I call my iconnect number, it goes directly to voicemail. There

Hi All, Outbound Iconnecthere calls work without any problem but Inbound calls are very intermittent. It seemed to work for a week or so but over the past week 99% of inbound calls are dropped to ICH voicemail. Would moving the Asterisk box to a public IP resolve the problem or is it just an ICH/Asterisk problem? I am registering against natrelay.deltathree.com. asterisk -vvvc shows an

I can't talk through iConnectHere. The connection gets made but as soon as any sound is transmitted the call ends and the Asterisk console shows an "Unsupported Media" error as follow: Got SIP response 415 "Unsupported Media" back from 213.137.73.147 My only allowed codecs are alaw and ulaw. My sip.conf looks like: [iconnect] type=friend secret=xxxx username=yyyyyyy

Is it possible to send the CallerId to IconnectHere with Asterisk when making outbound calls? I read somewhere that it doesn't work. I have set up everything to send the correct CallerId info to IconnectHere but I get a "442-887-926267" caller id. In [globals] ICONNECT1=1713...(my number) MYNAME=My Name I set up the Caller Id in the dialing macro: [macro-iconnecthere] exten =>

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN} Well,

For the past several days I can no longer use iconnecthere with asterisk. It is broken in BOTH directions; I can neither make nor receive calls. On outbound calls I get an immediate error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 On incoming calls, the call switches through OK, and for a few seconds I get audio in both directions, although much

Hi friends, I've noticed that first register message sent by * always get rejected by the destination sip server. Then * sends a second registration message ( with Autherization section, and that get accepted by the destination host). Why is this ? Isnt there a way to tell * to send with Autothorization message the first attempt ? Asterisk sends this first 9 headers, 0 lines 11 headers,

I can't get the callerid feature to work when being passed through iconnecthere. Is it even possible to specify your own callerid using iconnecthere? -sip.conf- ... [iconnect] type=peer username=xxxxxxxx password=xxxx callerid="Jerky McJerkface" <(555) 867 5309> host=213.137.73.178 -extensions.conf- .... exten=>_1NXXNXXXXXX,1,SetCallerId,4168675309

Symptoms: when calling my iconnect phone number (13033913323 in my bogus example below) from my cell phone, I can see that the call makes it to my asterisk server, and my phones even ring once as * passes the call through during the "180 Ringing" period. However, it seems that iconnecthere.com cannot see my "100 Trying" and "180 Ringing" messages, as they