similar to: Skinny (SCCP) help

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

Hi Jan, >the last 2 days i was working on getting the 7920 Phones to work with >Skinny & Asterisk; however no luck (yet). Same here, no joy so far. >Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for >me ? it should be documented at the cisco page, but it isn't :-( The default file should only get requested when the specific file wasn't found.

Hello all, I am trying to upgrade the firmware on my cisco 7910 without using CCM. I was told that chan skinny is possibly capable of doing that and would like to make sure. I have P00405000600 firmware which I have put in version in skinny.conf. the phone basiclaly stops at verifying load. tcpdump shows nothing happening apart from small amount of traffic to port 2000 (skinny). Does anyone

Hi all, I'm writing my graduation theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

Greetings: I have a working configuration for SCCP on our LANS which doesn't route RTP correctly to a skinny phone behind NAT registering from a remote public IP. Configuration: asterisk 1.4.35 servicing only skinny phones trunked to asterisk 1.2.40 which services chan_phone FXS, zap FXO and SIP phones; both instances of asterisk are behind NAT and run on the same host (using different base

I wonder if Asterisk's skinny/sccp channel driver could be used as a "client" to register with a Cisco PBX. That is, along with a SIP client, say, have Asterisk and said SIP client stand in for a Cisco phone, or an IP Communicator. Anyone done this? Cheers, b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type:

Hi people, I have a Cisco ATA 186 which understands only the SCCP protocoll, therefore I am a pure beginner and I hope that anybody of you could help me. How will I configure the ATA which has 2 analog ports? For any support I would kindly thank you Tamer

Hello everyone! Anyone know if there is a way to use chan_skinny or chan_sccp to emulate a Cisco 7960 and talk to the CallManager. I realize it is intended to talk TO the phone, but I'm looking for an SCCP softphone solution (OS X). IPBlue has a client for Windows, yes. So, how much of a stretch can this be? Can't find any info on this anywhere. Tried Wiki, etc. Could someone please shed

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List, I have a Multitech H323 Gateway MVP400 box with 1 phone on port FXO 1. I have Asterisk ruuning in Fedora Core 3. Both are in the same network. But I can't figure what I have to do in Asterisk to make that box work. What files I have to configure? Can anyone help me? I will really appreaciate youu help. Luis. _________________________________________________________ Do You Yahoo!?

Hi i have to do the following setup: 1 - i receive a call on skinny protocol 2 - i forward the call to a sip user I think that the skinny phone must be registered on asterisk, in a particular extension, for example: [skinny_internat_ext] 987,1,Dial(SIP/user@host) And if the skinny phone dials 987 i make the call to SIP/user. But how can i do that if the skinny phone isn't registered to

Hi, can i set up my asterisk for: - receive a skinny call in a specific context (yes, i have already compiled asteirsk with h323 support) - forward the call to a sip user A - make the sip user B join the call and create a conference between skinny caller, A and B maky thanks

Hey, Does anyone know how to use the cisco router with an fxo wic with Asterisk? I don't have enough space on this device to support an IOS that supports sip or h323. Currently the only one signaling in there says Cisco. I assume this is the skinny protocol. Does anyone know how to configure this 2600 with Asterisk? Thanks, Erik

I'm attempting to do a first-time Asterisk install at home, firstly for use by my self and my family, and secondly as a learning experience. I've got a new house, and the previous owners removed all but one (1) phone jack. So I figured I might as well build a PBX. Functional goals include station-to-station calling, rudimentary auto attendant/voice mail, and perhaps tieing into the

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small