similar to: Remote Call Pickup

Hi, Can anyone tell me if Asterisk sets some variable when doing a call parking (when someone presses an exten set in features.conf). In can't find this information on a wiki. Cheers ;) Andrew

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

I have some beefy dual-Xeon servers that I will be using for Asterisk VoIP applications (i.e. no Zaptel cards). Using 2.6.11-1.14_FC3smp as the kernel (Fedora Core 3), and currently with Asterisk STABLE. My question is concerning the CPU setup, as I've seen conflicting or out-of-date suggestions: given the above config, should I have hyper-threading turned on or off? Turned on appears like 4

Hello All, I recently put in a zaptel 1fxo/1fxs card. I am experiencing heavy static. Even with the pots line disconnected, if I do a dial I still get static. This way I know it's not the line, but rather something on the card. I tried alternate pci slots. This card has a power connector, does anyone know what the power requirements are? The unit is in a small case with a 2.4ghz p-4 and

Is there any SIP or IAX phones that can be configure in french instead of english. I tested Cisco 7960 phones but I can't change the language it's only available in english with the SIP firmware. I have a customer that's located in France and he wants french phones if possible. So I'm wondering if there's any one out there that found a phone that can be change to

Hi. Download pwlib, openh323 Janus-patch at http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries Refer how to compile http://www.mail-archive.com/asterisk-users@lists.digium.com/msg86875.html Cheers. Kim. > > Message: 1 > Date: Wed, 11 May 2005 16:42:25 +0100 > From: Cesar Garcia <cesar.garcia@idecnet.com> > Subject: [Asterisk-Users] oh323 driver compiling

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hi, Does anyone have remote call pick-up working on * (either via SIP or otherwise)? If so then can you post your features.conf, sip.conf and/or zapata.conf? We can't seem to get this (seemingly simple) function to work. Cheers, Damian. -- FFF Managed Technology Ltd 60 Cook St P.O. 6368 Wellesley St Auckland t +64 9 356 2911 f +64 9 358 9070 m +64 21 415 297 w www.fff.co.nz

I had a nice long email written out describing my problem in detail. Between that, the list archives, and double-checking before posting, I'm happy to say my issue seems to be fixed. How's that for service from a mailing list? Helped me fix a problem before I have ever posted to it (this is my first post to this list). The issue was a faulty rule. Using a redirect to a folder rather

All over a sudden the getquota plugin in SquirrelMail doesn't work anymore. I activated debugging an got: IMAP command sent: a001 GETQUOTAROOT "INBOX" IMAP response received: Array ( [0] => * QUOTAROOT "INBOX" "" [1] => * QUOTA "" () ) A manual test results in: . GETQUOTAROOT "INBOX" * QUOTAROOT "INBOX"

Dear R help group: I am attempting to produce a density plot from a list of 20000 values using the density.lf function and would appreciate any help, I hope I have done my homework reading the documentation but I still seem to be missing something basic. I have read the data as a table using read.table, with header=TRUE (I excluded 2000 values), when calling the objects it appears to be there and

I'm soooo close, but this last little thing is eluding me... I have the following Sieve rule in my global sieve rule: require ["fileinto"]; # Move spam to spam folder if header :contains "X-Spam-Flag" "YES" { fileinto "Junk"; stop; } This isn't firing. The .Junk folder exists under the user directories, but messages that have the

Hello everybody, I would like to implement "callback" function. When I call a person and his extension is busy I can press, for example, 5 and get a callback when his phone is not busy anymore. When I create a call file and copy it to spool call folder asterisk makes a call. One problem is that when extension is still busy my phone rings and I get busy tone of the person who I am

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

Hi, I've been experiencing trouble with my DAHDI channels for some time and have finally decided to try and resolve the issue. Essentially, the problem I am having is that when a call comes in, and my DAHDI phones therefore ring, Asterisk thinks that one of the handsets has picked up to answer the incoming call - whereas in actual fact it is still on hook. The call then gets instantly

I am planning to buy Dell 2650 server with dual Xeon processors. And I would like to buy two TE410P cards for PCI with 3,3v. This is on Dell site about PCI slots for Dell 2650 server: 3 PCI-X (1x64-bit/133MHz, and 2x64-bit/100MHz) Does that mean I will be able to buy two TE410P cards ? Or I need to buy two TE405P cards ? Thanks for help. bartek

I would like to release prepaid application. But I have a small problem, we are using their Cisco prompts (nice lady voice) And I do not know if it is ok to release it. Bart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031201/db22d880/attachment.htm

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000066"> <font size="-1"><font face="Verdana">Hi

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000066"> <font size="-1"><font face="Verdana">Hi

-----Original Message----- From: Gregory Wiktor - ADCom Corp. Sent: Monday, May 16, 2005 5:40 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Static on TDM Zaptel FXO Hello, Yes in the bios I set unused irq's. Zttest is sporadic. This is a non HT cpu, on a standard ide drive. It is basically just a p4-2.4 with a single ide, onboard