similar to: Call Transfert with SwissVoice IP10S in MGCP mode

hallo, does anybody successfully managed to get swissvoice ip10s with h323 firmware work with asterisk ? mgcp firmware works fine, but with h323 i'm still getting one way audio. regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

taken from bug 881 (now resolved) :-( ---------------------------------------------------------------------- markster - 05-19-2004 09:21 CDT ---------------------------------------------------------------------- As it turns out the 10S cannot conference on the device. From Jean-Francois at Swissvoice: Hi Mark, IP10S have not the capabilities to mix by itself 2 RTP flows, that why it refuses

Hi there, here some questions and experiences after playing for one day with 3 Swissvoice ip10s and the latest * CVS: QUESTIONS: - what is the user option "enter voice mail number" good for? It doesn't appear to be of any practical use - does anyone have some Swissvoice info that I cannot find on their web site like the guide to MGCP XML (.svd), guide to configuration file

I have set up a new SwissVoice phone and it can receive calls but I cannot make calls out from it. The setup is simple for now, 2 phones: SwissVoice is ext 7726 and Cisco 7960 (SIP) is ext 7999. I can call from the Cisco phone and it rings on the SwissVoice phone but when I dial from the SwissVoice phone I get a busy tone upon dialing the second digit. The log reads as follows: -- Endpoint

Hi there, I have serious problems with MGCP and Swissvoice ip10s, and it appears that recent CVS also introduced trouble for other MGCP users. Please check and add comments in the bugtracker so that we can get a clearer picture - thanks! Also comment if things are working fine for you. http://bugs.digium.com/bug_view_page.php?bug_id=0001542

Hi, Does anybody know the place to download the firmware for swissvoice ip10s I have several phones with application IP10 H3 v1.0.0 (Build 1) I'm looking for newer H.323 and also MGCP firmwares Are the SIP firmware available, according to web its targeted to Q1 2004, but we have week left in Q2 I sent several email to swissvoice support,, no answers Regards Juri

Hi Does anyone have a howto on how to set one of these up on Asterisk or Trix box please? I can make it SIP or MGCP so whatever you have ;-) I have found one page but it isn't really a howto setup Thanks in advance Paul -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone had success getting the Swiss IP10S and the SIP ( IP10 SP v0.0.1 (Build 4)) firmware working with Asterisk? If so do you have copies of what worked in sip.conf and phone configuration files? I can't seem to get the phone to register, it tries but is denied with a Forbidden (which I am guessing is authentication). I tried without a secret, but the phone seems to use swissvoice

I have 1 IP phone (Swissvoice IP10S) and 1 POTS phone. When I dial the number for the IP phone off the POTS phone, the IP phone rings. But when I pick up the handset on the IP phone, I get a busy signal and this message on *: Aug 23 09:38:57 NOTICE[1142106560]: chan_mgcp.c:2243 handle_response: Terminating on result 502 from svip10@00059002042b-1 Here is the entire session. svip10 is the 1 and

I had the telnet window to the phone open by chance and noticed this line twice when I tried to call the IP10: WARNING: may need to undo rtp port operation here The warning line appeared immediately when I picked up the handset. I have no idea what this means. I also tried calling the phone from a POTS phone and I got the same warning. What is even better is that this coincides with the

Hello, As I have problems getting transfert call working with my grandstream SIP Phones, I woul like to know if it is possible to do it with a proper dial plan in exten.conf. I haven't found any information about that in the docs. Regards, Daniel ANDRE -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Funny - I downloaded the latest Asterisk CVS, and it's pretty much working. Will report when I have some more success. PaulH -----Original Message----- From: Philipp von Klitzing [mailto:klitzing@pool.informatik.rwth-aachen.de] Sent: Tuesday, 28 September 2004 9:46 PM To: Paul Hales Subject: Re: [Asterisk-Users] Leader IP10S Hi! > I have been lent a Leader IP10S phone (SIP) for

Hi there, after testing with a MGCP phone (Swissvoice ip10s) I found the following ASTERISK-based codes (VERTICAL SERVICE CODES) to work - I assume that most of those will also work with SIP, but haven't checked that yet: *67 - Calling Number Delivery Blocking *70 - Cancel Call Waiting *72 - Call Forwarding Activation *73 - Call Forwarding Deactivation *78 - Do Not Disturb Activation

hello, i found in list archives some notes about grandstream sip voip phones. Does anybody succesfuly tested those phones with asterisk ? Mark ? What about the prices ? regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind

Hi there, tonight I upgraded one of my ip10 phones to "Appli 1.0.0 build 3" with "Boot 0.3.6" This firmware is dated Dec.19, 2003. For Robert (aka "info lists") this fixed the multiplied digits problem (which I never had). Since there is no website of Swissvoice I guess you'll have to e-mail them if you want upgrade... Unfortunately the upgrade did

does anonybody know what is the status of gsm codec in snom phones ? they were some issuses in archives, some problems so i would like to know what is the actual status. best regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ majo at sunteq dot sk

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

hello, does anybody know how to setup avm fritz pci card in p2p mode ? regards marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind is like a parachute... it only works when it's open.

hello, i have problem with oh323 channel driver (tryied differnet versions). when i try to make call between oh323 - sip, oh323-isdn, oh323-capi asterisk crash with segmentation fault. Channel driver was compiled with pwlib 1.5.0 and openh323 1.12.0 libs. Does anybody know solution ? WrapH323Connection::WrapH323Connection: WrapH323Connection created. -- Executing Dial("H323:31119",