similar to: LGPL IAX2 software phone (for WIndows/Linux platforms)

iaxComm is a crossplatform open source softphone utilizing the IAX2 protocol. It is distributed as part of Steve Kann's iaxclient library. I've just posted new Windows, Linux and Mac OSX binaries to sourceforge. The Windows binary was compiled on WinXP. The Linux binary was compiled on RedHat 9. The OSX binary was compiled by Andreas Wrede on 10.3 and was tested on 10.4 (Tiger) beta.

iaxComm is a cross-platform IAX2 softphone available for Win32 and Linux. Win32 and Linux binaries as well as the LGPL source are available at: http://iaxclient.sourceforge.net Recent improvements are a less cluttered user interface, audible ringback and audible outgoing ring, and of course IAX2 protocol support. iaxComm is based upon the wxWindow GUI framework and compiles on Microsoft

iaxclient.sourceforge.net is the home of Steve Kann's crossplatform port of the iax library. iaxComm is a client written in c++ using wxWindows. There is a Win32 binary on the site. I think that it should be compilable on Linux and MacOSX, but can't test it. Feedback is welcome.

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X (Panther) systems. Recent Changes: * Improved jitterbuffer code * Steve Underwood's Packet Loss Concealment Code Features Include: * iLBC support * GSM support * speex support * ulaw and alaw support * Blind Transfer. * Custom Ringtones per

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X systems. Sources included in the iaxclient library: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Precompiled binaries at: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Features: * Register with multiple servers (ie enterprise server and iaxtel).

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

I tracked down the problem with crashes at startup (and with no window appearing). I was trying to make the last column of the call list as wide as possible when resizing the window. With some display settings, the reported width of the client window is off by 1 pixel. Instead of automagically adding a scrollbar, wxWindows starts running around in circles. Sooner or later (sometimes much

I am using IAX soft clients (firefly, IAXComm, IAXPhone) from a Win2K machine on a NATed private LAN to connect to my IAXTel account. All of my calls to outside numbers(1-800, 1-877, etc) seem to be disconnected after 9 seconds. Has this limit been placed on IAXTel? My call to the echo test number at 1-700-999-9613 seemed to run for as long as I wanted. --

Hello, I am having horrible echo problems when using the FireFly client on both the caller and callee sides of the call. When I use another IAX soft client like IAXcomm or IAXPhone I do not have the same echo problems. Has anyone else experienced this and do you know what might be the problem? Thanks, dj -------------- next part -------------- An HTML attachment was scrubbed... URL:

As a test, I was trying to use Iaxcomm and Iaxphone to connect to Asterisk and dial out to my other line. Using either of these soft phones, I can connect to Asterisk and listed to audio just fine. I can even connect across the net to another asterisk server and hear audio just fine, however, when I dial out to my second land line the audio that is transmitted is horribly broken up. It is as if

On Thu, 08 Apr 2004 10:14:09 -0400, Steve Kann wrote: >Gary wrote: > >>I have noticed lack of codec negotiation with calls thru a registrated >>asterisk box. >> >>No seen problems with outbound calls, (though I haven't specifically >>tried it), but the problem exists inbound. >> >>Easiest method for testing this was ring in via a sip client set

Hi, I seem to be having problems with IAX clients based on the iaxClient library. I have been working on my own client (an augmentation to the Call Manager I released last week) and it seems to regularly miss incoming calls entirely. It also occasionally misses the drop signal when the remote end drops a call. Has anybody else seen this kind of behavior? I have tested with my client, with

Hello all! Has anyone expirienced the following:? With an IAXclient softphone (like diax/iaxcomm/etc) Dialing to the PSTN (zap) or a SIP device has no problems .. but when I make calls between 2 softphones I have weird problems.... in about 4 out of 10 IAX-2-IAX softphone calls I get a big delay .. in the beginning of the call it's all okay... (delay < 0.5 sec) but the longer the call

Hello All When I open up iaxcomm, it registers fine with the asterisk server. If I call into it, iaxcomm will ring; however if I leave iaxcomm sitting idle for awhile (I haven't figured out exactly how long) it seems to miss calls. I can see the calls coming in on the asterisk server but they never ring through on iaxcomm. If I close it and reopen it, it takes calls again fine. I thought I

Hi, I've had a hard time understanding what was going on in a new * setup. The deployment has a * box running on dual xeon RH9 stock 2.4.20-8 and some different versions of asterisk (1.2.10/1.2.16) + libpri + zaptel + wanpipe. Short version: audio from iaxclient clients is fine from windows but poor from linux when going to zaptel. E.g. Iaxcomm running on windows works fine, but the same

We have a problem with our iaxclients. Our asterisk runs on a public host with debian and many of our IAX2 clients are natted. The iax.conf looks like: [23456] accountcode=123 type=friend context=user auth=md5 secret=xxxx username=23456 callerid=Testuser 1 <23456> notransfer=yes host=dynamic The cli command IAX2 show peers shows all clients as unmonitored CLI> IAX2

Hi, if I change Iaxphone settings to qualify=yes it says it's unreachable. Can iax2 clients be monitored with qualify option ? Is this problem related to iaxphone ? Anyone sucessfully using iax qualify feature ? Regards, Rob.

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hi, I have a problem with my IAX softphones. After a call, when the softphone hangup, it remains unavailable for the other softphones. It can call anybody, but can not be reached... For example, if A call B, B answer, then A or B hangup, and C won't be able to call A or B after that (but A or B would be able to call C). The Dial function returns that the chan is unavailable. That is very

Hi, I have downloaded iaxcomm version iaxcomm-lin-1.0rc3, when I try to execute it it gives following error. # ./iaxcomm Error wxWindows Fatal Error : Couldn't Initialize IAX Client . any idea what's going wrong ? -ag