similar to: iax vs iax2 connections

I've asked this before but I don't recall seeing anyone respond. Maybe the answer is so simple that it should jump right out, but its not. I've got three iax connections defined, two working fine (including one to iaxtel), and one that is somewhat intermitant. If I do a cli 'iax show registry' and 'iax2 show registry' I see "both" iax and iax2

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

G'day list, I am getting a lot[1] of traffic on my Internet link, ICMP messages from 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address belongs to iaxtel.org). I see from the wiki that IAXtel supports only IAX2 from December 2003. Fine, however it looks like my * still wants to try and register using IAX1, and I can't find how to turn this off. This situation is

I tried to connect my * to IAXtel, but i always get this errors. chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected: Registration Refused On dial a iax number i get: chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority found chan_iax2.c:5528 socket_read: Immediately destroying 3, having received reject chan_iax2.c:2411 iax2_hangup: We're hanging

Hi All, Sorry if this has been covered in the past; I've tried searching the archives, but haven't had any luck finding a similar problem. Basically I have problems when using IAX2 (which I now understand is just IAX). I have three IAX connections setup - VoicePulse, IAXtel, and an Asterisk IAX<->PSTN termination provider here in Sydney (ATP) If I try to use the CVS STABLE version

I have, in iax.conf the register statement: register => username:password@iaxtel.com This causes registration attempts to iaxtel.com for both IAX and IAX2. Every once in a while there is a packet for port 4569 keeping the IAX2 registration alive. This is fine. But, I have a barrage of registration attempts to iaxtel on port 5036 for IAX. Every UDP packet is answered with an ICMP packet

Hi all, I spent most of the last weekend testing and trying to diagnose some mostly incoming call issues. I'll start with the easy one in the hopes it might have a positive impact on the others. First- I have an account with IAXTel. I can place calls to other IAXTel subscribers and also through IAXTel to landline toll free numbers and all works great. iax2 show registry shows I am

Think I'm a little confused on registering an iax connection; could someone enlighten me? I guess the real question is... when two * machines are going to rely on an iax link (each with their own dial plan), do both machines have to register with each other (eg, both need a 'register' statement)? Or, will a single machine doing the registering cause the opposite machine to recognize

I finally got around to signing up with Iaxtel and Free World Dialup... the price was right, as far as that goes! I've gotten and placed calls via FWD just fine. But I can't seem to get registered, or stay registered, with Iaxtel. My logs show the story; at startup I see: Jan 20 07:14:44 VERBOSE[14121]: -- Registered to '65.39.205.121', who sees us as ... yada yada... As

Can anyone tell me why I keep getting these messages from IAXTEL? It does appear to register since I get lines like this: 2005-04-30 04:26:42 VERBOSE[1644]: -- Registered to '69.73.19.178', who sees us as 67.182.152.242:4569 But what is this? I don't think IAXTEL is working for me, since I can't dial 800 #s through it when I copy the iaxtel.com instructions. 2005-05-20

I'm trying to make a call from an IAXPhone client - through the * PBX to an 888 number using the IAXTel link. I'm using the basic conf files for extensions and iax. I get successfully connected (at the "Attempting native bridge" line of the output) and am then able to talk both ways for 20 to 30 seconds and then the IAX phone appears off line. If I wait on the PSTN line for

I'm attempting to get two Asterisk 0.4.0 PBXes to communicate with one another using IAX/IAX2 trunks. I've managed to get a semi-functional NAT Firewall working as a PBX (with Asterisk running directly on the firewall itself), but there are issues with bind()ing to various interfaces which is causing outbound SIP issues. To get around these issues, the idea is to do something like

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I have looked all over the site(s) for help. But heres the problem. Im missing something. In coming works fine from FreeWorld via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net

I've searched WIKI and Archives but nothing. Im getting: -- Called username:password@iaxtel.com/1800somenumber@iaxtel Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call rejected by 69.73.19.178: Unable to negotiate codec -- Hungup 'IAX2[Iaxtel]/8' == No one is available to answer at this time -- Executing Hangup("SIP/104-b8eb", "")

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

Hi i was trying to call 17009978275 which is my Fwd line on my notebook from Asterisk and i keep getting this message on the console. -- Executing Dial("Zap/2-1", "IAX2/@iaxtel.com/17009978275@iaxtel") in new stack -- Called @iaxtel.com/17009978275@iaxtel WARNING[1150495040]: File chan_iax2.c, Line 4547 (socket_read): I don't know how to authenticate rob to

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

I've not been able to register with iaxtel.com for the last couple of days. Is anyone else seeing this, or did I miss something?