similar to: Problem with the Internet LineJACK ISA card...

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

Hello All... I have searched in the archive and also followed Zara's instruction on getting incoming calls to work with Asterisk...but I still can't get Asterisk to answer incoming call on Linejack's LINE port. I attached a phone set to the PHONE port, and telco line to the LINE port on the Linejack(ISA) card. I have downloaded, compiled and installed the newest driver for

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

My thanks for previous help on fixing IXJ issues in 1.2.40; I now have problems with a just-built 1.4.35 on the same host: [Aug 18 17:26:48] WARNING[27209]: app_dial.c:1298 dial_exec_full: Unable to create channel of type 'Phone' (cause 0 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) O/S: Linux 2.4.27; IXJ driver for Linux Rev. 3.5, gcc 3.01 I applied the patch for

I have a Quicknet Linejack in /dev/phone0. My phone.conf is: [interfaces] mode=dialtone format=slinear echocancel=medium context=mayores device => /dev/phone0 Only I can mark 7 digits, soon asterisk tries dial automatically. I cannot mark 8 or more digits. 6 or less digits work ok. -------------- next part -------------- An HTML attachment was

Hi, I am trying to get a prototype working based on Asterisk and Quicknet cards. I currently have to systems set up each with a LineJack card. I have the systems working, but can't get the voicemail demo to work properly. Messages to the user telephone set from the voicemail system are clear, but recordings left through the phone are distorted. Sounds like the audio has lots of echo and

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Dear all I read on the list back in 2003 that * does not support IXJ LineJACK dialout yet is this still the case? Thanks

Hi, New to the list. Just wanted to know if someone managed to get LineJack to make outgoing calls to the PSTN line in Asterisk. Any dev on this? Cheers, -P -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

Hi, I have been experimenting with Asterisk and the linejack card and have discovered the follow: 1) The linejack in FXS mode works well with asterisk as long as the format in the phone.conf is set to ulaw. With mode set to slinear, gsm recorded messages played by voicemail appear to be slightly choppy (sounds like a click at the end of each frame). 2) Using the configuration above, the

Hi all, Currently trying to get asterisk to dial out with an Internet Line Jack card, however, it does not use the pots line, only on the line it dials out of. This is similar to the previous thread/posting "Asterisk won't answer pstn ring", but I didn't find any follow up to get it working. My asterisk setup is like this: iptelephony:/etc/asterisk# cat phone.conf | grep -v

Hi all, I'm configuring meetme in asterisk but no luck. I dont have a digium card, so based on the wiki, i have to install the zaptel driver and enable the ztdummy on it. I compiled, install the module and enable it on the module.conf. When i tried to start the asterisk, asterisk wont start because of the error in loading the meetme module. Jun 16 15:36:56 WARNING[-1084989312]:

I found a message from you to the asterisk users mailing list from 2001. I was wondering if you got (or still have) an asterisk system working with the linejack? If so, would you be willing to assist me with mine? I seem to have things working, and * says that caller ID is coming in, but I can't get * to actually answer the call. Thanks, Greg -- NetIO.org

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

I want * to answer the phone when call comes-in. I've enabled /dev/phone0 in phone.conf and created /dev/phone0 with a command: mknod /dev/phone0 c 100 0 Though, when I start * I get: Parsing '/etc/asterisk/phone.conf': Found Sep 12 00:18:42 WARNING[16384]: chan_phone.c:950 mkif: Unable to open '/dev/phone0' Sep 12 00:18:42 ERROR[16384]: chan_phone.c:1141 load_module: Unable

I have a Quicknet Linejack. Actually, I want to make a standalone(no internet connections) call to my asterisk box running GNU/Linux. When I call the system it says: -- Executing BackGround("Phone/phone0", "demo-congrats") in new stack NOTICE[14349]: File channel.c, Line 1212 (ast_set_write_format): Unable to find a path from 2 to 1 WARNING[14349]: File file.c, Line 553