similar to: Host unspecified ??

I have an OpenBSD 3.7 gateway. This gateway run Asterisk. I have two windows box which use X-Lite softphone, and each box connect to Asterisk using this softphone (X-Lite). Asterisk use the following configuration : /etc/asterisk/sip.conf ; Phone #1 [Phone1] type=friend host=dynamic nat=yes defaultip = 192.168.10.12 # windows box IP context = sip callerid="Phone1" <1> ;

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

I have the following asterisk configuration (sip.conf) : [General] externip=82.79.81.3 localnet=192.168.10.0 localmask=255.255.255.0 [Phone1] type=friend host=dynamic nat=yes qualify=yes context=sip callerid="Phone1" <1> disallow=all allow=gsm [Phone2] type=friend host=dynamic qualify=yes context=sip callerid="Phone2" <2> disallow=all allow=gsm [Phone3]

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

Hello, I am trying to configure the my asterisk box here with the following **iax.conf*** [NuFone] type=peer host=switch-1.nufone.net secret=xxxxxx ***extensions.conf:*** exten => _1NXXNXXXXXX,1,Dial,IAX2/xxxxxxx@NuFone/${EXTEN} exten => _011N.,1,Dial,IAX2/xxxxxx@NuFone/${EXTEN} I have a couple of Xlite softphones and 2 analogue phones connected to a mediatrix 1102 connected to our lan.

Dear All, I installed an Asterisk on a linux PC, and X-Lite on two Windows PCs, all in a LAN. But, when I make phone call from one X-Lite to another, I always get Call Failed: 404 not found. Here is my sip.conf: [Phone1] type=friend host=dynamic ;defaultip=192.168.1.103

Hi, I installed Asterisk an all works fine exept for Grandstream. When I call with a softphone (ex X-ten) to a Grandstream (BudgetTone-100), I can make a conversation. = ok When I call to a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I

Hi all I have registered my phone1 in asterisk server 192.168.0.9 and phone2 in asterisk server 192.168.0.6. Both are sip phones. i configured the extensions.conf file in both the server. the extensions.conf file on server 192.168.0.9 is exten=>301,1,Dial(SIP/301@192.168.0.6,20,tr) exten=>401,1,Dial(SIP/phone1,20,tr) 301 is the extension number for phone 2 in asterisk server

Hello I Installed Asterisk on RedHat 9. I am currently try to configure minimum with two softphone talking to each other over the LAN. I am using X-Lite softphones from xten.com site. I defined 3 phones in sip.conf and also specifies in extensions.conf file. I am able to ring other computer but there is no voice exchange ( i can't hear any think except ring). Here is the portion of sip.conf

Hi! I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722 (that asterisk doesn't support), i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it

I've just installed asterisk on a Debian Linux (apt-get it) And i have placed two sip phones in sip.conf and i'm testing parking with them I have phone1-SIP/1000 and phone2-SIP/1007 The following happens if i park from calling party and everything is OK 1. Pickup Phone2 and call to Phone1 2. Talk 3. Phone2 dials #700 and parks the call (it is placed in 701) 4. Phone2 is hangup 5. Pickup

Hi Guys, This article was posted few days back. I thought i can get more info here. I am trying to bridge two outbound calls together. (have a program start a context, dial one party and then bridge another party) I thought that the G() flag in the dial application would work. I tried the the following test (continue down a dial plan). One station calls into a context ... in this case, dials

Hi! Maybe you can help me. I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722, i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it possible that

I'm setting up a queue for two independent operator phones that are capable of answering multiple calls at once. It's currently working with the following settings and Asterisk 1.4: queues.conf: [telefonistas] strategy=roundrobin ;strategy=leastrecent music=default timeout=60 retry=0 maxlen=0 wrapuptime=0 ringinuse=yes autofill=yes joinempty=yes member => SIP/8899 member =>

Hello everybody, I am sorry to bring this up again if this kind of echo issue has ever discussed. Phone2 in below call path experiences quite annoying echo: Phone1 --> FXS (TDM400P) --> Asterisk --> SIP GW --> PSTN --> Phone2 It is annoying as on phone2, we can hear the whole words we say with the level of maybe 25% of the original sound. I can reduce the echo to maximum with

I don't know if this is possible, and I can't quite get my head around how to do it... If I am using DUNDi for redundancy in a cluster, when Phone1 makes a call to Phone2, both Asterisk A and B will be in the RTP stream: +---+ +---+ | A |-----| B | /+---+ +---+\ / \ Phone1 Phone2 Is there a way configure re-invites

I have the following setup: AnalogPhone1--TDM400P-ASTERISK---via SIP---Softswitch--------POTS Phone2 When I call from AnalogPhone1 to Phone2 I hear a ringing tone and all is well. When making a call from Phone2, I get a dial tone but after dialing the number I hear nothing (no ringing tone). On Asterisk console it says that a call is coming in and that it is ringing Zap/2. I can also hear the

Hi all I've only been working with Asterisk for a matter of days but have already grown into a big fan =) Much as I've managed to get internal calling working fine, I have a configuration running on an old PII-233 on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond W6692 PCI Card as /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try

Hello I have one phone (phone1) in one network, the other (phone2) in public network. both can call the other side; phone1 can be heard by phone2, phone2 can't be heard. I don't have NAT set on both end, but I use rtpproxy on SER. Is NAT still necessary to be set on both phones? Thank you! steven

Now that I am using the chan_sccp module, the phones now work as single line phones. However, these phones have support for multiple lines. So I setup phone1 with extension 1001, and phone2 with exts 1002 and 1003. If I call ext 1003 from 1001, phone2 rings correctly and if I pickup the handset on phone2 I can carry on the conversation. If I call ext 1002 from 1001, phone2 rings as it should