similar to: iconnecthere Troubles

Hello, I am new to Asterisk, as of today. Installed on a RH9 box, with no problems. Built with 'make samples' as to get an understanding of how things work. Currently, I am utilizing SJPhone as a SIP client - not interested in shelling out cash for the IP phones, until I know I have a hold on things. I have run into a few problems I was hoping you could help me with : 1. When

Howdy y'all, I am using an ATA-186, through Vonage, connected to my X100P. It works well - except, hanging up... The hangup doesn't register, most of the time, with Asterisk. Are there any known tweaks out there that I should look into? I've noted some have altered dsp.c, and rebuilt. Just curious to see what y'all think. Below is my zapata.conf file:: [channels]

Hello again, Here's the next big issue, I thought I'd let you munch on. We are utilizing Cisco 7960's and the following entries in our extensions.conf file: Exten => 1637,1,Dial(SIP/100) Exten => _NXXXXXXXXX,1,Dial(SIP/${EXTEN}@sipdemo) Exten => _NXXXXXXXXX,2,Congestion Exten => _1NXXXXXXXXX,1,Dial(SIP/${EXTEN}@sipdemo) Exten => _1NXXXXXXXXX,2,Congestion These

I know almost nothing linux, and don't really know that much about Asterisk (proper).. but I was 'pulled' by this subject and grabbed an <mailto:Asterisk@home> Asterisk@home installation CD (version 1.3) and just went with it. Newbie doesn't quite describe it, I'm a banker.. this simply goes to show how easy Asterisk is becoming (I certainly hope this direction was meant

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

Is it possible to send the CallerId to IconnectHere with Asterisk when making outbound calls? I read somewhere that it doesn't work. I have set up everything to send the correct CallerId info to IconnectHere but I get a "442-887-926267" caller id. In [globals] ICONNECT1=1713...(my number) MYNAME=My Name I set up the Caller Id in the dialing macro: [macro-iconnecthere] exten =>

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN} Well,

Hi All, I can only seem to get iconnecthere working with incoming calls intermittently. One minute it seems to work, and the next it doesn't. I am not aware of anything being changed in the config files. Outgoing calls work ok all the time. The Asterisk box is behind NAT so that does complicate things slightly. However, the Iconnecthere PCPhone client software works perfectly for

Hi guys I just registered an incoming number with iconnecthere and I'm trying to set up incoming calls from icconnecthere on my asterisk server. I took a look at john todds sample sip.conf and extensions.conf file but for some reason my incoming is still not working. At this point I wish to use iconnecthere merely for inbound calls. Also my asterisk server is behind nat. The following

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

This may be slight off topic, but perhaps it has relevance: My iconnecthere account no longer works for "inbound" calls through NAT using the standard configuration that they provide on their website. I have sent them a message, but I believe it will be flushed down the toilet by the first-tier support people. When I call my iconnect number, it goes directly to voicemail. There

For the past several days I can no longer use iconnecthere with asterisk. It is broken in BOTH directions; I can neither make nor receive calls. On outbound calls I get an immediate error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 On incoming calls, the call switches through OK, and for a few seconds I get audio in both directions, although much

I can't get the callerid feature to work when being passed through iconnecthere. Is it even possible to specify your own callerid using iconnecthere? -sip.conf- ... [iconnect] type=peer username=xxxxxxxx password=xxxx callerid="Jerky McJerkface" <(555) 867 5309> host=213.137.73.178 -extensions.conf- .... exten=>_1NXXNXXXXXX,1,SetCallerId,4168675309

Hi, Anyone having problems receiving DTMF on incoming iConnectHere lines? They disappeared for us sometime in the last 12 hours... And, yes, we've restarted * and rebooted our * machine. Michael Swan Neon Software, Inc.

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

Hi. I cant make SIP calls from asterisk. When I start asterisk, I get the following message: What does it means?? Asterisk is not behind NAT or Firewall. ---------------------------------- [chan_sip.so] => (Session Initiation Protocol (SIP)) == Parsing '/etc/asterisk/sip.conf': Found Sep 16 09:52:33 WARNING[16384]: chan_sip.c:8477 reload_config: Unable to get IP address for

Trying to figure out what's going on, CVS ident CVS-04/20/03-01:34:54. I get frequent errors such as this one, which showed up on the CLI interface within a couple of seconds of a cold start: WARNING[114696]: File chan_sip.c, Line 393 (retrans_pkt): Maximum retries exceeded on call 73015f757661435d247414b104964554@192.168.1.10 for seqno 102 (Request) All calls to iconnecthere terminate

I moved from 0.7 to Stable recently and my dialing out/in from iConnectHere stopped working. I made no changes to my conf files or anything else (other than the upgrade). Now I get a "Unsupported Media" error even though I'm still using ulaw and alaw. It stopped working with my softphone, my Grandstreams, my Snom, etc. Searched the lists for a recent discussion of this but

I've been using * CVS code from May of this year and was able to connect to iConnectHere and receive calls with * being behind NAT. Now that I've upgraded to 1.0 RC1, this no longer works. I've tried setting nat=yes in places, externip, et al with no success .. even though the code I was running from back then worked without that. Any suggestions? BTW, I've gotten DTMF from