similar to: Distinguish between voice and data call

Hi I have kind of an odd problem. When dialing in from an outside line via a TE410P card it seems like MusicOnHold and MP3Player doesn't work properly (for me anyway). The remote end which is calling * doesn't hear the music but just keeps ringing. But if I insert a Playback("file_which_dont_exist") just before the Moh or MP3Player I can hear the music. Actually I observed the

Hi there How do I change the dialplan runtime, if I for example wants all calls on the main number to be answered by a voicemail (when it is out-of-office hours). I want to be able to change the configuration by pressing a DTMF combination e.g. *82. Can't figure out whether it is necessary to change contexts or how to do it. I have read a lot of examples and config documentation, but I

Hello fellow * users Hope this isn't a stupid question; I've done my research but could not find a proper answer. I have 8 different destinations which I want to match. The numbers are: ###### 00 ###### 20 ###### 30 ###### 40 ###### 15 ###### 35 ###### 12 ###### 44 Right now I've solved it by doing this: exten => _######[0234]0,1,HangUp exten => _######[13]5,1,HangUp exten

I must be getting something wrong about this call pickup. In zapata.conf I have just the default callgroup=1 and pickupgroup=1. If I call from my mobile to * and then try to dial *8 from any other phone than the one which is ringing I just get a "Nothing to pick up" answer on my * console. I also have experimented with those parameters in sip.conf but are not aware of exactly where to

Hi everybody I've just installed a new Redhat 8.0 and configured it with Asterisk, zaptel and libpri. Afterwards I installed a TE410P and configured this as well. But when starting Asterisk I get the following error message: ------------------------------------------------------- -- Registered channel 1, PRI Signalling signalling ..... -- Registered channel 15, PRI Signalling

Hi there I have a Welltech Wellgate SIP device and I want to be able to do a supervised transfer. I've read that in order to do that I have to use flash hook. The problem is just that I can't flash hook with this device. I'm in contact with the developer of the SIP device but don't know what to tell him in order to get him to fix this. What is happening when you flash hook, I

Hello there Yesterday I updated my pwlib, openh323 and Asterisk from CVS. After making "clean opt" in pwlib and openh323 and make "clean install" in Asterisk i get an "Undefined symbol" error when I try to start Asterisk. As far as I can see its when loading the h323 channel driver the error occurs. Do I have to update other things as well, by reading the various

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

HI, I'm trying to exclude some files & directories from a filesystem which I would like to copy to a different site. I did: # rsync -avz --exclude-file=/fs21/tmp/perl_scripts/exclude.txt /fs22/a/circuit_design mickey.willow.com:/cpu/store/design where file /fs21/tmp/perl_scripts/exclude.txt contains the following directories and files to be excluded from /fs22/a/circuit_design :

re i have posted this before but received no response... is there anybod reading on this address? cu ----- Forwarded message (env-from mickey) ----- re this is a patch against samba-2.2.12p0 and adds support for updating utmp on bsds. code similarly ripped from openbsd's ftpd (; cu -- paranoic mickey (my employers have changed but, the name has remained) --- utmp.c Thu Aug 12

Hello * users I've have a rather disturbing problem, which I don't know how to debug or how to solve, but first a brief description of the set up. One Asterisk server with a TE410P card installed (first line used on this only), and a number of Wellgate 3504A (4 port FXS devices with SIP firmware). There is no connection from the Asterisk server to the outside world or any other

Hello * users Sorry I forgot to send the mail in plain text the first time... I've have a rather disturbing problem, which I don't know how to debug or how to solve, but first a brief description of the set up. One Asterisk server with a TE410P card installed (first line used on this only), and a number of Wellgate 3504A (4 port FXS devices with SIP firmware). There is no connection

Running Samba 2.0.3 on a Digital Unix 4.0D system. All functions of the new Samba version appear to run properly (previously ran 1.9.15) with exception of users being able to change their own Samba password (root is only able to change password on behalf of users). Following is permissions assigned to smbpasswd: -rwxr-xr-x 1 root system 901120 Mar 31 16:06 smbpasswd Following is

Hi there I've installed a 12 port MGCP gateway, (Hitron MDU-5612), which works ok most of the time. Sometimes when talking to the outside world, (via a TE410P), the line gets disconnected. I think its related to MGCP because I've also setup some SIP devices which doesn't behave like this. I've examined the logs but can't find anything useful, it looks like its the MGCP device

Hi all, I'm running two debian machines with dovecot 2.0.9 autobuilds and would like to keep mails synchronized on both via dsync. Mails are kept in maildir on both sides. While syncing, dsync gives the following error: dsync-local(jan.binder): Error: Can't rename mailbox INBOX to INBOX_a432bf2eca595a4dba47000043b078f4: Renaming INBOX isn't supported. dsync-local(jan.binder): Error:

Hello... I have a server with 4 x SCSI drives and I would like to install Centos 4 (or 5) onto a software RAID 10 array. Do you know if this is possible? I noticed that under the Centos 4.92 beta, RAID 5 is an option but for some reason RAID 10 is not listed. There does appear to be a RAID 10 module.... /lib/modules/2.6.9-42.0.8.ELsmp/kernel/drivers/md/raid10.ko More info I found here:

Dear R-help, Let me know if I should email r-devel instead of this list. This message is addressed to Professor Lumley or anyone familiar with the survey package. Does svycoxph() implement the method outlined in Binder 1992 as referenced in the help file? That is, are weights incorporated in the ratio term (numerator and denominator) of the estimating equation? I don't believe so since

re this is a patch against samba-2.2.12p0 and adds support for updating utmp on bsds. code similarly ripped from openbsd's ftpd (; cu -- paranoic mickey (my employers have changed but, the name has remained) --- utmp.c Thu Aug 12 14:24:20 2004 +++ /home/mickey/utmp.c Wed Mar 30 15:51:40 2005 @@ -261,6 +261,7 @@ } #ifndef HAVE_PUTUTLINE +#include <ttyent.h>

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Hello there I'm quite a newbie in the IP Telephony area. I'm playing a little around with a setup with one linux box with a e100 p card installed, which functions as an Asterisk gateway and a oh323 GK(Gnu Gatekeeper). I have two h323 phones, Welltech WellGate 1501 and 3502. So far I've managed to get the two IP phones and Asterisk connected to the GK. I can place calls from one