similar to: asterisk and zplex10b

hello all, I still experience the random off-hook on my fxo cxhannels, i am using a zplex-10b channel bank. which does not allow me to call out. The situation still persists...this is what i have in the zapata.conf [channels] context=internal context=incoming context=default usecallerid=no usecallwaiting=no signalling=fxs_ks channel=1-8 signalling=fxo_ks channel=16-24 but i still have the the

can somebody that has these hardwares(X101P and S400P) working on his asterisk system please assist.................. you can send the solution to austino@skannet.com..... the error message is what i have below. ---------- Forwarded message ---------- Date: Thu, 1 May 2003 21:01:21 +0100 (WAT) From: austino@skannet.com To: asterisk-user@lists.digium.com Subject: Error working with X101P and

Could someone please assist me soonest. when i run asterisk with one X101P card and a S400P card asterisk will run but the card will not work.this is the message i get: [format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) [cdr_csv.so] => (Comma Separated Values CDR Backend) [cdr_mysql.so] =>

I am always getting multiple PCI Master Abort messages when I try to plug in a second TDM400P. I have asked this question before, but I nothing really solved my problem and I just put it on the back burner for a while. I am at a point where this is a crucial issue. I have read that the Zaptel devices share an IRQ, is this causing the problem? Is there a way that I can manually change the IRQs of

hello, I have been using asterisk now for about 2 years now on a RH8.0 it is our main call gateway. I have on the box 3 T1 TDM cards connected to 2 Rhino channel banks (FXS) and 1 CAC Access bank I (FXO) with so many softphones and ATA 186s. It has been working good till today some few hours ago. i just discovered that there were no dialtone on the phones. Asterisk did not spit out any error, it

Hi, my Situation: a w2k-server set in mixed mode as ADS-Server,a debian machine with latest stable samba compiled self with ADS-support. samba machine joined to ADS-Domain succesfully, winbindd installed and configured, all w2k users and groups visible on samba-server. Browsing and connecting to w2k-server and samba-server from the samba server with smbclient and -k option works fine for all

Hi, Is anyone here using the SuperMicro SuperServer 6014P-8R with Asterisk? I'm especially interested if you've used it with a TE405P or TE410P. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Hey everyone, I'm having some strange responses, and a bit of trouble with getting access to a member server on my domain. I've got Samba running on another Linux box as a PDC, and my Win2k clients can login just fine, and share between one another. The problem comes in with another Linux workstation that's setup as a member server. Here's the relevant smb.conf section from the

Hi! I have this configuration: SIP client A <-> NAT box A (real external IP) <-> Asterisk server (real IP) <-> (real external IP) NAT box B <-> SIP client B The echo test form any of the clients to the asterisk server is working just fine, even without canreinvite=no. When I try to call from SIP client A to B, wihtout the canreinvite=no in the sip.conf, the call

Samba Team, I've been trying to get my Samba server to authenticate users against a Windows 2000 Active Directory domain controller, and it just doesn't work. I've encountered a TREMENDOUS amount of postings from people who have run into the same issue, and there's never any responses with a resolution. I must have viewed more than 500 postings over the course of the day. I

I have a linux (redhat 8.0) samba server that is a part of a Windows ADS. I have gotten user authentication to work fine (I THINK), but still I have some problems with access to share. The strange thing is that I can access the share from smbclient (on the linux server: #smbclient -d4 //Bones/share -U foo where user foo has no user on the linux box itself, so the authentication is done

Hi, I have installed Elastix 1.5.2 (Barranquilla, Colombia (TELCO: METROTEL)) with a TE220P (2xE1) and TDM2400P (16FXS), openr2 is included in 1.5.2 version. The outcoming calls are ok, but with incoming call i have an error: ERROR*[*14972*]* chan_dahdi.c: Chan 2 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted,

Does any one knows of an Windows based SIP video phone???... Thanks... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Tuesday, January 11, 2005 9:27 AM To: asterisk-users@lists.digium.com Subject: Asterisk-Users Digest, Vol 6, Issue 142 Send Asterisk-Users mailing

I have just make zhone set2default to factory default setting. What do i have to do to make T1 interface zhone match with T100P.

T100P with an Adit600 channel bank. 16FXS, 8FXO. Been doing this with the past month or so's worth of CVS HEAD, probably longer. I have a weird problem when I bridge calls... not always but often enough to be nasty. Call comes in FXO, * calls my home via IAX2... times out so picks up another FXO port and dials my cell. 7 times out of 10 it bridges just fine, but about 30% of the time

Hi, I have scanned through the archives of this list and found a number of question about hardware, but I just can not find the answer to my question. I am new to phone systems, I got "drafted" to come up with a new phone system for our company (I guess they figure since I know computers I know phone systems as well :O). We have 5 analog (I guess they are called PSTN lines) lines coming

Hello. I am going to be putting together my first * system using FXO/FXS interfaces. All the systems I have set up thus far have been pure VoIP setups. The system I need to set up should have 3 FXO interfaces and 1 FXS interface, as well as several SIP phones. I have noticed people complaining about Digium's TDM cards - are these isolated incidents or are these cards unreliable? I intend to

i am using RH8.0,when i try to load the zaptel driver using "modprobe zaptel" it give an error "cant locate module zaptel" also when i do "modprobe wcfxo" it gives "can't locate module wcfxo" when i try compilling zaptel i get "make ***[zaptel.0] Error 1 what am i doing wrong someone please help! -- Augustine GDES 18b oshin road,kongi