similar to: (no subject)

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

hi, I have a problem in call time out, An ISDN PRI E1 from PSTN and another ISDN PRI E1 from a Nortel PBX is conneted to my server. But when i do a Dialout(from both E1s)the calls do not timeout. For ex. Dial(Zap/g4/123456|20|t) suppose other side is ringing and is not answering. even after 20 seconds, call doesn't get timeout pls gv me a solutions.. its really urgent.. Surajee

<P>hi,</P> <P>Can anybody pls tell me how to activate loggin CDR on mysql db. I tried&nbsp;editing the /etc/asterisk/cdr_mysql.conf file and recompiling asterisk, it didn't work. Normal loggin on Master.csv file works fine.</P> <P>Thank you inadvance,</P> <P>Surajee</P> <P>&nbsp;</P><br> --------------This mail sent

hi, The prob is when we ring 2 channels simultaneously, only 1 channel is actually ringing. In our configuration, the Asterisk box is connected to an E1 channel bank, where 15 analog extensions are conencted to channelbank inturn. We tried following, Dial,Zap/g4/444&Zap/g4/448|20|t Heres the output, -- Executing Dial("IAX2[trunk10@trunk50]/1",

<P>hi everyone,</P> <P>I know this issue has been raised many times before, i think still the problem remains. When a call is made through a Zap channel, whether it is actually made or not (irrespective of whether, engaged, busy, or actually answered), asterisk logs it in CDRs as a call made. This makes it impossible to do an accurate billing. Has anybody found a way to overcome

hi! I wanna do some arithmatic operations (addition and substraction -integer operation) inside extensions.conf. Is there a simple way to do this. If I do yy = ${xx} + 1 // say "xx" is initialized to '0' the resulting "yy" will show "0 + 1" Obiviously not the result I need. Any help !!!!! denzel.

<DIV><FONT face=Arial size=2>hello All,</FONT></DIV> <DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV> <DIV><FONT face=Arial size=2>our Asterisk pbx is sitting behind a normal analog hardware pbx, we have to dial 9</FONT></DIV> <DIV><FONT face=Arial size=2>to take an outside call through the hardware pbx, our

hi, i have connected a SNOM 200 to the asterisk. here are my settings, Codecs ------- Default codec - g.711u/g.711a Packet size - 20ms Negotiation - Interoperable Type - 160 DTMF ---- Inband - negotiate Outband - negotiate Payload Type - 101 when a call comes to the SNOM or when making an outdial, following warning messages are coming on asteisk, WARNING[1209214400]: File dsp.c, Line 1198

hi all ! we've got IAX2 protocol working between several Asterisk servers. Now we are concerned with doing bandwidth management to maintain an acceptable voice quality. We thought of prioritizing the udp traffic. ( Giving a high priority to those IAX2 udp ports.) I know that IAX2 uses udp/4569. Is there any other traffic/ports that we need to consider for bandwidth shaping w.r.t IAX2.

hi All, We are working on Soft-PBX using Asterisk. This relates to CALL TRANSFERRING aspects of Asterisk. We were able to do one type of call transfering, ie, the called person can transfer the original call to another person. but we were unable to do the other, that is, call initiator him/her self couldn't transfer the call. Eventhough the documentation for Dial application intructs to

Hello, I am quite new to asterisk. I managed to connect our 2 branch offices with asterisk. In one side, our linux asterisk box is connected to the leased line going to our other office and on the other side its connected to office PBX through a channel bank. This installation is running smoothly, except for one thing. If an extension is busy, i want to transfer that call to a near by one,

Hey Guys! Please help me to find out issue. I have two PRI ## Span 1: WPT1/0 "wanpipe1 card 0" span=1,1,0,esf,b8zs bchan=1-23 hardhdlc=24 echocanceller=mg2,1-23 ## Span 2: WPT1/1 "wanpipe2 card 1" span=2,2,0,esf,b8zs bchan=25-47 hardhdlc=48 echocanceller=mg2,25-47 Sometime my calls got through but some time i am getting pri cause 44 sebpbx1*CLI> == Using SIP RTP

Olle ?) aiming to unify logging, eventing, monitoring (AMI, SNMP, ...) APIs. I think that thread occurred when it was decided to include a version number in Manager interface. I agree this is an interesting idea ... The use case that made me ask this is here : I've got a running system which is working ok up to a moment it stops to dial out on ISDN-BRI spans (incoming calls are ok). When

HI, I tried to configure Asterisk 1.8 on one of my test-hosts. I've installed from centos-asterisk.repo (http://packages.asterisk.org/centos/$releasever/tested/$basearch/): Nov 26 15:34:56 Installed: asterisk-sounds-core-en-gsm-1.4.20-1_centos5.noarch Nov 26 15:34:59 Installed: asterisk18-core-1.8.0-1_centos5.i386 Nov 26 15:35:02 Installed: asterisk18-voicemail-1.8.0-1_centos5.i386 Nov 26

Alright I've been having an issue when trying to dial out locally when coming from SIP. This used to work no problem, now it doesn't. Now the local PRI to Bell Is working fine I have calls coming in and out of it constantly right now. BUT if I try and make a local call from SIP (from X-Lite or one of our Linksys SPA2102s) It fails every time with errors like these == Using SIP RTP

hi All, Our configuration is, ISDN PRI lines connected to Asterisk Server, SIP users connected to Asterisk We route calls from ISDN PRI to SIP users, We did a CVS upgrade few days ago, now the sip users(CISCO phones) are experiencing, distortion of voice while they are engaged in a call. ie, SIP users can here the call clearly, but the outside caller heres distorted voice. ie, to

"RED: Loss of signal (LOS): The equipment shall assume "loss of signal" when the incoming signal amplitude is, for a time duration of at least 1 ms, more than 20 dB below the nominal amplitude. The equipment shall react within 12 ms by issuing AIS." This sounds like what is happening, and is in order with what one of the technicians said - I was about 20 dB below their

"RED: Loss of signal (LOS): The equipment shall assume "loss of signal" when the incoming signal amplitude is, for a time duration of at least 1 ms, more than 20 dB below the nominal amplitude. The equipment shall react within 12 ms by issuing AIS." This sounds like what is happening, and is in order with what one of the technicians said - I was about 20 dB below their

Hello! We are using the Digium 405PP card, and getting the following messages: Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 8 on Primary D-channel of span 1 My config file is below. We are trying to set up D-Channel on channel 24, 1-23 in trunk group 1,

hi ! I have asterisk with Licensed G.729 codec enabled. Whenever I make a call using this codec a warning apears as, WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames WARNING[18450]: File dsp.c, Line 1106 (ast_dsp_process): Unable to detect process 256 frames