similar to: Caller-ID Spill

Hi, I am a beginner in asterisk. Implementing it in my dept in India using TDM400b card with asterisk, zaptel, libpri version latest of CVS HEAD Callerid on my system is coming tough. Asterisk doesnot finishes the callerid spill and Cancells it. After going through code in Callerid.c and chan_zap.c I found that my line is providing caller id of length 8867. Flow enters in zt_call and

Hi, Has anyone seen this problem - Nov 25 18:09:14 WARNING[12923]: chan_zap.c:3463 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. I started to get this message after upgrading from 1.0.2 stable to the latest CVS. Hope someone can help me out here. Regards Garry Taylor

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Sorry if this is a daft question but when a PSTN call comes in on my X100P the console shows the following; NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)...

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

Well, I got my nice new 4 port FXS card this afternoon, and with all my other asterisk problems, decided now was a good time to throw it in.... So far, I have dropped it in, done a clean cvs checkout on zapata, zaptel, asterisk, make clean and make install on each. I can load the wcfxs module which finds the card (though one time it failed the register check and locked the machine up, a hard

Seems to have struck a small problem.. Using a t100p & Zhone channel bank.... one extension ringing another.....the following will appear WARNING[18448]: File chan_zap.c, Line 2685 (zt_handle_event): Didn't finish Caller-ID spill. Cancelling. if we are using defaultzone=au change it to us and the problem goes away..... any possible solutions ?? Gary .

Calling out on PSTN over a TDM400P seems to generate a Red Alarm - whatever that is. I have another extension on the PSTN, and I can dial out over that. zttool shows no alarms. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV I Board 1 OK 0 0 0 CAS Unk YEL 0 db

I've updated to the latest CVS as of today (and rebuilt RedHat 9). My setup is as follows: Wildcard X101P - channel 1 TDM400P - channels 2-3 - fxs cards with fxo signalling, channels 4-5 - fxo cards with fxs signalling I got CallerID to work on channel 4 with an old CVS, despite the usual "Didn't finish CallerID spill" message. However, as soon as I insert the following

Hello everybody. I have an customer asterisk 1.0.5 running well since 3 monthes, 2 TDM cards 4 FXO, 4 FXS. Since one week, unable to pass call between Zap and Sip getting the "exception on 15, channel 1" The * box is connected to an eads PBX and it seems that failure started when they make some changes on the PBX. Have someone an idea and what is causisng this failure? Here are the

Scenario, I got some very good help earlier from Joseph getting me up and started but I have a couple of small problems still. Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4 Analog dialout line and Analog handset plugged in. Problems: 1. Incoming calls work and the phone rings and can be answered no problems, (although I wouldn't mind being able to adjust the ring but

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>

I have TDM400P , with 1 FXS and 1FXO I'm tring to forward all incoming calls to a SIP phone in the context where all calls from the fxo come i have : exten => s,1,dial(SIP/phone1000,5) the phone rings but when i answer the sip phone ( phone1000 ) is connected but the phone from which i'm ringing still rings. Here is the log from asterisk : *CLI> -- Starting simple switch on

HI I have two servers both of which get this message on one of the lines. Ring/Off-hook in strange state 6. The one server seems to be ok with it, but the other one when an extension picks up there is no one there and the incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like someone had suggested, but it didn't do anything. I also upgraded zaptel to the latest. 1.2.18 and

Starting - oh - three weeks ago I started getting this when I compiled zaptel stuff: In file included from /lib/modules/2.4.26smp/build/include/linux/spinlock.h:6, from /lib/modules/2.4.26smp/build/include/linux/module.h:11, from wct4xxp.c:31: /lib/modules/2.4.26smp/build/include/asm/system.h: In function `__set_64bit_var':

A very good day to you all, We can't get the phones to pick up on an incoming call on analog trunks. We're using the digium products in the box, with snom phones internally. This is the output from the asterisk console: linux*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo pstn-incoming en default 1 pstn-incoming

I'm trying to call from XLite phone to PSTN (I've tried this from internet and from local network the same) The Xlite doesn't write that it is connected but receives excelent audio. At the other end comes only noise. Some times only for a second you can here the caller voice , but this was only one time :) I saw with ethereal that UDP packets are coming and going to the asterisk