similar to: No Ringing from PSTN

Hi, I?m trying to get app_festival to work. I got the source from the Debian woody package of festival-1.4.2 and applied the patch that came with * sources it applied fine; then I made the debian package and installed it. I have this on extensions.conf: exten => 6700,1,Festival(Hi there how are you doing ?) When I dial 6700 I hear nothing and then * hangups: -- Executing

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Im having problems setting up a trunk between two locations. Heres the setup I have: Server A is connected to the PSTN at my datacenter Server B is connected to a clients e1 line at his datacenter I only want to route calls from Server B to Server A and out through the PSTN. Server A has a lot of other things connecting to it, so I need a very specific context for all calls to go through.

Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,

Hi all, can somebody explain this ? Thanks, Thomas. ******************************************* beroNet technologies GmbH Dipl.- Ing. Thomas H?ger Potsdamer Str. 18 A 14513 Teltow FON: +49 (0) 3328 3077731 FAX: +49 (0) 3328 334779 Email: thomas.haeger@beronet.com *******************************************

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

Hey all...for whatever reason my caller id doesn't appear to be working. My setup is simple (Wildcard FXO and thats it) and I'm just expecting the Caller ID to show up on the console. I'm seeing this: *CLI> -- Starting simple switch on 'Zap/1-1' NOTICE[262161]: File callerid.c, Line 238 (callerid_feed): Caller*ID failed checksum NOTICE[262161]: File chan_zap.c, Line

When dialling in and dialling my extension, when answered I get " Read_channel ## vpb/1-3: Setting record mode, bridge = 0 WARNING[20499]: File chan_sip.c, Line 1111 (sip_write): Asked to transmit frame type 8, while native formats is 4 (read/write = 4/4) == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' -- hangup on vpb (vpb/1-3) -- Hungup on vpb/1-3 complete --

Hi, si posible on SIP phones to have the dial tone after 9 like on the FXS card? I set ignorepat => 9 on my extensions.conf... Best regards, Chris HARIGA

I am wondering if it's possible to use a bunch of cards in a PCI backplane instead of going out to the extensions with T1 and then and adapter. How are people connecting to large amounts of extensions?

Hi all! Please I need someone that have already done an H.323 - SIP gateway to help me with some problems. I can stablish calls from a SIP telephone to a H.323, but I can't do vice versa... (problems with port 1719- when the gatekeeper tries to contact with asterisk at this port, it is unrecheable...). Please someone can help me? Regards, Mireia

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio

I'm trying to get musiconhold to work w/ my Asterisk system, and I'm not having much success yet. First, I noticed that nothing happened even after I had enabled all of the options in zapata.conf & setup a sample extension in extensions.conf. Then I read something about how Asterisk uses mpg123 to play the files. I discovered that this had not been installed on my system, so I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I was just measuring the bitrates of a couple of codecs via iax. I'm getting much higher numbers than expected, so maybe I'm doing something wrong? Measured with iptraf, values displayed are: codec: measured bitrate (bitrate according codec definition) gsm: 52 kbps (13 kpbs) alaw: 154 kbps (?) speex: 57 kpbs (24 kpbs) Seems a little

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

Hi, Today I was assigned a block of IPs by my ISP and decided to move the Asterisk box onto a public IP. I am also using 10.1.0.0/16 on my LAN, with the IP phones under 10.1.4.0/24 There is clear routing between the public and private IP ranges (no NAT). Private can see public and vice-versa. I changed the proxy config in the phone to point to the new IP address. Previously the 7960 worked

Hi all, I'm having a problem with * being very finicky about the length of DTMF key-presses during menus, voicemail, etc. Basically, short (<100 ms) tones are ignored, anything between 100ms (or so) and about 300ms is correctly detected, and anything >300ms is interpreted as multiple presses of the same key. This is terrible for callers who are trying to get to the correct

Hi List.. I m getting this mesg while trying to dial an extension, both SIP UAs are registered with asterisk, m trying to dial extension 1015 from UA 12321@xyz.com to extension 1016 of UA 77777@xyz.com In extensions.conf I added exten => 1015,1, Dial(SIP/77777,20,tr) Any hint? JF WARNING[16397]: File pbx.c, Line 1153 (pbx_extension_helper): No application ' Dial' for

Hi folks! I bought a X100P a while ago and know I've tried to get it working here at home again ... but I can't manage to get my X-Lite client working with Asterisk (CVS from a day ago) ... I've downloaded the latest version of X-Lite and I believe that I've set it up correctly ;-) But I cant get it to register with my Asterisk - I only get "Login timed out, contact your

Hi, I have enabled ztdummy in order to have * compile it. I can modprobe ztdummy with no problems. The sole reason, i need ztdummy is to heve musiconhold and meetme working. However when I start *, it says this and does not start. ---------------------------------------------------------------------------- ---------------------- == Parsing '/etc/asterisk/zapata.conf': Found