Displaying 20 results from an estimated 4000 matches similar to: "chan_capi and latest Debian package"
2003 Sep 14
6
chan_capi
Hi chan_capi users,
this thing is awesome, no delays like in modem_i4l!
Plus, it got those nice ISDN features.
Here's my question:
Does my service provider (Deutsche Telekom) have to provide me with
these Services (CD, ECT)?
(the Readme in 0.2.5 says "does not relay on service CD")
I know, that I don't have CFU,CFNR,CFBS (which I would have to order
seperately).
How likely
2003 Aug 04
14
Mysql CDR
hello all,
I am using the msql cdr module to store cdr in db, I realised that it does't capture the start and end time af a particular call record.
Therefore I dive into the source code to add the start and end time into the query (add something like cdr->start, cdr->end), but end up getting segfault.
the original version of cdr_mysql.so works fine but I need the start time and end
2004 Feb 17
5
chan_capi problem
Hi to all
I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus.
I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start:
[chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group
Feb
2006 Jun 29
4
Very bad quality with AVM Fritz!card PCI and chan_capi
Hi everyone,
I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite
happy with it. However, I am experiencing a quality issue with my AVM
Fritz!card PCI which is used with chan_capi. When somebody calls me on
this line he hears a lot of noise and I hear "scratches" and "plops". It
is very annoying. Below is is my /etc/asterisk/capi.conf
I've tried to
2004 Jun 16
2
embedded Asterisk
Hi All,
I have a thin cliente here that i want to run asterisk:
- National Semicondudor Geode GX1 266MHz Geode 266MHz single chip
- NS Cx5530a Southbridge National Semiconductors SC2200
- NS PC97317 in chipset
- 32MB Compact Flash
- 64MB Ram
- 10/100Mbps, Autosense 10/100Mbps, Autosense Realtek 8139C National DP83815 / DP83816
Some tip?
I have a ide>flash
2005 Feb 03
3
Where are chan_capi bug reports and bugfixes sent?
Hello all
I found a bug in the chan_capi driver (really a not implemented message
handling and then a false error condition) and I guess I have wrote a
patch to fix it (basically I searched the internet for other capi open
source implementation an borrowed the code snippet) but I don't know
where to send the report and bugfix.
I also found some miss-behaviours that I would like to share
2006 Feb 23
1
chan_capi-cm 0.6.4 random outgoing MSN problem
I've having a big problem after having upgraded to 1.2.4 and
chan_capi-cm 0.6.4
When making outgoing calls I don't seem to have any control over the CLI
that is presented to the called party -- it can be any one of the MSNs
allocated to the line, allocated on what seems to be a random basis.
This is on a BT Business Highway line (which is essentially an ISDN2e
line with two built-in
2005 Jan 12
4
chan_capi-0.3.5 error 127
Hi,
I have a problem for install chan_capi
My pc: Suse 9.1, with asterisk current stable en cvs
I have download
http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz
And the path from
http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2
And patch the chan_capi
# cd chan_capi-0.3.5
# patch -p1 < chan_capi-0.3.5-patch.diff
# make /for install
My error
2005 May 12
5
chan_capi, chan_misdn and chan_modem
Could someone please comment on the current state of chan_capi,
chan_misdn and chan_modem channel drivers in terms of functionality and
stability. Specifically, which channel driver would be best for a
passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that
chan_capi distinguishes between junghanns and non-junghans cards, and
that chan_misdn is better suited for general misdn
2004 Mar 30
2
CAPI problems when loading chan_capi.so
Hi all,
I compiled/installed chan_capi.so without problems. When I launch
Asterisk, I get the following error:
---
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif:
ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338
2004 Jun 14
1
Chan_Capi 0.3.4
Just tried compiling chan_capi 0.3.4 under CVS Head and get the following
errors.
chan_capi.c:60:
`__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__'
undeclared here (not in a function)
chan_capi.c:61:
`__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__'
undeclared here (not in a function)
chan_capi.c:62:
2006 Oct 26
1
chan_capi and bristuff
Hi,
Reading from www.voip-info.org, i can see that "Junghann's chan_capi is now
part of bristuff <http://www.voip-info.org/wiki/view/Bristuff> , as of
version 0.3.0-pre".
What does that really mean ?
Shall I understand I can share a Junghanns QuadBRI board between 2
CAPI-enabled software (like a 0.3.0-pre bristuffed Asterisk for instance) ?
If positive, what are the pros and
2004 Jan 23
6
rc.local dont works
Hi All
I have a problem with initialization of asterisk using my rc.local file. when i call asterisk from the prompt it works well but don?t in the initialization...
I have in my file that comands:
touch /var/lock/subsys/local
modprobe zaptel
modprobe wcfxo
safe_asterisk
I read in somewere that it can be an interrup problem and i use the cat proc/interrupt to see what is happening
Somebody
2005 Mar 17
3
Compilation problem chan_capi and Eicon Diva 4Bri
Hi *,
I want to integrate the Eicon Diva 4Bri Card to Asterisk.
Eicon drivers and capi is installed. I use the latest dev version from
eicon compiled and installed for my fedora 2 system.
I found the chan_capi for asterisk from www.junghanns.net. Also loaded
the patch and applied to the chan_capi source tree.
I changed the Makefile to include the capi20.h from eicon:
2003 May 18
1
micky mouse sound with chan_capi solved?
hi all
talking to this friend if mine just now, I realised I had no 'micky mouse'
sound as eaerlier with chan_capi and AVM C2. We talked in 1 hour and 18
minutes without encountering any problems whatsoever. This was him calling
me, but I don't know if that's important.
roy
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
2003 Jun 04
2
chan_capi with avm c2 only uses one BRI
hi all
it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with
chan_capi. Both channels seem to work, but not at the same time. And - yes -
they're connected to different NT boxes :)
Any ideas? kapejod?
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are like air conditioners.
They stop working when you open
2003 Aug 09
1
Chan_Capi questions??
I have been using chan_capi and a Fritz AVM (passive) card for a little while now.. So far so good.. There are still a couple of things I am not totally sure about..
First..
What is the difference between "softdtmf=0" and "softdtmf=1"??
Which is the preffered/recommended option??
Second..
What is Early B3 all about??
Should I be using it in my dial string??
Which is the
2007 Mar 22
1
chan_capi and only one B channel usable?
Hello list!
I have a Asterisk 1.2.10 running using the package from Backports.org
for Debian Sarge.
I have setup chan_capi (0.6.5 from Backports) and it seems that I am
only able to use on B-Channel.
When trying to place the second call I get:
CAPI INFO 0x34a2: No circuit / channel available
capi info shows:
Contr1: 2 B channels total, 1 B channels free
And capi.conf is:
[ISDN1]
2004 Jan 16
1
ERROR[8192]
Hi all!
I get this error when trying to start asterisk:
ERROR[8192]: File asterisk.c, Line 1349 (main): Unable to connect to remote asterisk
What can be the problem?
Thank you!
Miklos
iPFONE Telefonia IP
Rua Caio Graco 735 S?o Paulo SP
iPBX +55 11 3801-3702
UK +44 870 - 3403539
FWD 64662
sip:ipfone@sipserver.com.br
www.ipfone.com.br
info@ipfone.com.br
-------------- next part
2005 Jun 16
9
chan_capi-cm-0.5 release announcement
Hi all,
I would like to announce the first release of the chan_capi
channel driver on sourceforge.net
The package is available for download with name
chan_capi-cm-0.5
and is the current CVS HEAD.
It is derived from the chan_capi-0.4.0PRE1 of kapejod.
The main changes are:
- complete rework
- fix race-conditions
- fix call state handling
- rework of debug/verbose messages
- added capiFax