similar to: BudgeTone 102 flakey sound

Hi, I'm trying to call a SIP server while providing the SIP server username/password in dial string but it's not working ... Dial(SIP/gs102:test at 192.168.2.81); User on sip server (192.168.2.81): [gs102] disallow=all allow=ulaw allow=alaw type=friend username=gs102 secret=test host=dynamic dtmfmode=inband defaultip=192.168.2.1 qualify=1000 mailbox=102 context=context-gs102

On 15-04-09 12:06 PM, Chad Wallace wrote: >> but don't know where to put those lines. I have BABY defined as >> >channel variable: >> > >> >BABY = SIP/babytel_out >> > >> >but that seems circular, somehow. > You put them in the context for your clients... From what you show > below, I'd say they go in the "local_200"

Hi All. I'm working on an * configuration. We require 8 inbound POTS lines, and CT1 or PRI seems like it will be quite expensive at that level. I've read that a T1 Channelbank plus the T100P would be a (the?) way to go for this situation. What is the recommended channelbank for use in this scenario? From searching the archives I see a lot of suggestions to get "a

What's the difference between user "123" and "devries"? Based on the output here, they seem the same..? tleilax*CLI> tleilax*CLI> sip show users Username Secret Accountcode Def.Context ACL Forcerport 201 password 201 default No Yes 123

Does there exist a text file with all the 'standard' Asterisk voice messages? I'm planning to get them recorded in dutch, but need to know the exact text of each prompt... Michiel

I'm reading the O'Reilly "Asterisk the definitive guide", 4th ed, with a starfish on it. In some ways, astonishing that it's not really that definitive, it's more general -- and it only clocks in at one ream of paper! In any event, I'm having some port problems on my home network: http://security.stackexchange.com/questions/81752/ I need to open ports for

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GS102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels and the first

Hi, I **think** that I have user of thufir101, because I get a 200 response below, but I also get a 404. It seems to depend on how I send the ip address/fqdn? tleilax*CLI> tleilax*CLI> sip show users Username Secret Accountcode Def.Context ACL Forcerport 201 password 201 default No Yes

Does Celt encode "silence" buffers (in a stream ) or will it produce "empty" compressed data so that bandwdith could be saved when used on a network? Thanks. St?phane Letz

On 2/20/15 6:15 AM, thufir wrote: > What's the difference between user "123" and "devries"? Based on the > output here, they seem the same..? > > tleilax*CLI> > tleilax*CLI> sip show users > Username Secret Accountcode > Def.Context ACL Forcerport > 201 password 201 > default

It looks as if that is more of a question/issue with your router, rather than Asterisk. I have SIP devices working on my LAN, all hardwired, and have no need to open any ports or have the router address SIP in any way My switch is not managed, and the router ports on the LAN side are all unmanaged, just a huge Ethernet "wirenut" You SHOULD be able to communicate between devices on the

I want to do something like: exten => _NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _Nxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _1NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _011.,1,Dial(Dial({TOLL}/${EXTEN}) exten => _9NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _9Nxxxxxx,1,Dial(${BABY}/${EXTEN}) exten => _91NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) exten =>

I'm trying to configure SIP trunking. Now, I'm referencing "Asterisk the definitive guide", 4th ed. While I don't have the page handy, I was reading the suggestion to try SIP to SIP before proceeding to outside connectivity. I'm aware that SIP trunking is a construct, but am, obviously, learning the system. What I'd like to do is from the CLI "ping"

---------- Forwarded Message ---------- Subject: Re: [LARTC] "weight" parameter in htb? Date: Wed, 3 Apr 2002 10:54:01 +0530 From: Shekhar Joshi <shekhar@disha.co.in> To: lartc@mailman.ds9a.nl On Tuesday 02 April 2002 07:32 pm, you wrote: > On Tue, Apr 02, 2002 at 03:34:08PM +0200, Martin Devera wrote: > > > E.g. you might have a customer agency which needs say 256

In the Asterisk log I see: --- [Mar 23 19:25:29] VERBOSE[4067] chan_sip.c: [Mar 23 19:25:29] <--- SIP read from UDP:198.38.7.34:5065 ---> SIP/2.0 200 OK To: <sip:16046289850 at sip.babytel.ca>;tag=sd3D4swKRc From: <sip:16046289850 at sip.babytel.ca>;tag=as07c833c5 Via: SIP/2.0/UDP 96.48.217.39:5060;branch=z9hG4bK13c68eb7;rport Call-ID:

Hi, I've got Asterisk configured and working (sort of) with an Eicon Diva Server 2M ISDN card (connected to S0 bus of another PBX). This * box is on a 'live', non-nat IP address. I also have a couple of budgetone phones, one behind NAT and one not. When I place an outgoing call, I get the following messages: -- Executing Dial("SIP/filbert-9876", "CAPI/288:333") in

I have a client using a Grandstream Budgetone 102, but he is unable to register to my Asterisk server. About every 20 seconds, I get the following messages: Aug 11 11:27:17 DEBUG[1087740720]: chan_sip.c:748 __sip_autodestruct: Auto destroying call '3b4b68ec48200ab9@192.168.xxx.xxx' Aug 11 11:27:19 NOTICE[1087740720]: chan_sip.c:7336 handle_request: Registration from

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on