similar to: callerid name modification (or adding)

If anyone could help me with this, I'd appreciate it! I've got an Asterisk deployment where I'd like to use an existing external Octel voicemail system. I've been trying to define an extension that if the call isn't answered in a few rings, to dial our external voicemail number. That voicemail system works by seeing the CALLED number and routing the call to the

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

Hi guys, I posted a somewhat similar question about a month ago and got a thoughtful resonse from Steven Critchfield, but I've got a quick follow up question to it. I'm looking to setup a 16 extension / 10-14 phone line Asterisk install for a customer who would like to have DID numbers for the extensions, since they're currently on Centrex and already have the 1-to-1

That could explain why it wouldn't work on any of my sip extensions I tried it on this morning when I first read about it and thought cool the things you learn. Is there anyway to make it work on Sip extensions? Cheers, Dean -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Aaron J. Angel Sent: Wednesday, 23

Hello, Sometimes, when a call comes in from the PSTN through our VoIP gateway, the information that is sent to our web page that logs calls includes the original CID name instead of the one that is we expect to be rewritten on the fly using Asterisk's LookupCIDName: ================= ;extensions.conf [internal] exten => group,1,LookupCIDName exten =>

Hi guys, I've run into a problem that I can't figure out on a bunch of handsets I have running into a Rhino Equipment 24-port FXS channel bank hooked up to a T100P and running asterisk-0.9.0 and the associated stable Zaptel release. The sidetone (your own voice that you hear in your handset, built in for comfort) is noticeably louder than it should be, and it doesn't seem to

Dear Colleague, I am writing to ask your help for a book I am writing about Life Practices. I am looking for examples of those simple things that we all do that are essential to expressing and maintaining our values as we face life's ups and downs - our Life Practices. What I am seeking is a bit like folklore. Something with a story and an easy to remember slogan or catchphrase. I am asking

> -----Original Message----- > From: john lawler [mailto:maillist@tgice.com] > Sent: Wednesday, January 07, 2004 1:38 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] yet another question on DID trunks > > Hey Steven, > > Sorry to bother you yet again w/ a question on my seemingly endless > quest to get DID trunks setup for a customer. > >

Dear Colleague, I am writing to ask your help for a book I am writing about Life Practices. I am looking for examples of those simple things that we all do that are essential to expressing and maintaining our values as we face life's ups and downs - our Life Practices. What I am seeking is a bit like folklore. Something with a story and an easy to remember slogan or catchphrase. I am asking

I'm not sure that this problem is strictly related to zaphfc, but this is what happens: my asterisk (build on bri-stuff-0.1.0-RC2k) handles a single PCI HFC-S based card. I own a Cisco 7940 Sip phone (fw 7.1) and a pc running X-Lite. Zaptel.conf and zapata.conf are taken directly from zaphfc samples. Extension.conf contains the following lines: [from-ISDN1] exten=>s,1,Wait(1)

Hi all, I tried to set the calleridname of an incoming call to get different incoming labels displayed for different incoming numbers. This does work for hidden number-calls so I can set the displayed CIDName on my cisco7960 from "CID withheld" to "abc CID withheld" If the incoming CID isn't hidden it works to use SetCallerID but not to change only the CIDName with

We are using Voicemail 2 and use the e-mail with WAV file attachment option. When we record a message from an internal extension, the WAV file sounds fine. However, if a caller from outside leaves a message, the volume on the WAV file is so low it is almost useless. When we access the voicemail through an extension, however, the volume sounds fine. Has anyone had this problem or any idea of a

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Hi; How can a user block his caller-id in Astersik? Regards Mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041229/07ecf20f/attachment.htm

I'm trying to get musiconhold to work w/ my Asterisk system, and I'm not having much success yet. First, I noticed that nothing happened even after I had enabled all of the options in zapata.conf & setup a sample extension in extensions.conf. Then I read something about how Asterisk uses mpg123 to play the files. I discovered that this had not been installed on my system, so I

Hi, I am setting up a hylafax server. From what I've read so far, hylafax supports CID numbers and names but currently does not support DID. I assume I can do something like this... [40faxDIDs] exten => _87[5-8]X,1,SetVar(CALLERIDNAME=${EXTEN}) exten => _87[5-8]X,2,Dial(Zap/g${hylafaxMODEMGROUP}) ...and use the CIDName variable in hylafax to route the faxes to the appropriate

Hello, We're having some issues with CallerID and I thought someone here might be able to shed some light as none of our carriers seem to know what I'm talking about. The issues is this: A client of ours uses an after-hours voicemail service as mandated by their corporate office. We have a Day/Night setting that lets them turn this on and off. A call comes in from one of their

On Tue, January 27, 2015 1:58 pm, Peter Lawler wrote: > On 28/01/15 04:47, Always Learning wrote: >> >> Saw this on the Exim List:- >> > <SNIP> >> >> I use Exim on C5 and C6 - should I be worried about Exim on C6 ? >> > > upstream references: > https://rhn.redhat.com/errata/RHSA-2015-0092.html When I read this I read that it is fixed in

Hello all, is here anybody who have any idea how i can insert a script or program to rewrite a callerid with special rules. This ist necessary because of many moving mobile offices who changes the telefonenumbers in short time distances. I've found the SetCIDName feature. But this doesn't work in my relation. The phones from wich the calls are, are connected via OH323 Module and

Here is the call flow: [ivr-incoming] exten => s,1,LookupCIDName exten => s,2,DigitTimeout(2) exten => s,3,ResponseTimeout(10) exten => s,4,Wait(1) exten => s,5,Background(custom/ivr-incoming) exten => 1,1,Background(pls-wait-connect-call) exten => 1,2,Dial(${RINGPHONENUMBERS},20,r) exten => 1,3,Voicemail,u${VMBOX} exten => 1,4,Hangup Running * 1.0.5. The calling party