similar to: Cisco Callmanager 3.3 Asterisk OpenH323

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

I've complied the OH323 .so successfully and can easily receive calls from my H323 gatekeeper (using 711u), however it seems that all outgoing calls are refused and I'm getting "reason 23 (Temporary failure)" as an error code which I can't find documented everywhere. My H323 gatekeeper needs a 001NXXNXXXXXX to dial out to the PSTN even if I'm in north america (Montreal)

Hi, try to setup asterisk as an ISDN2H323-Gateway. The only problem i have after establishing a call is, that Audio works only from IP to ISDN-Phone but not from ISDN to IP-Phone. A known problem ??? Thanks in advance Michael i am using asterisk-cvs, pwlib V1.6.6 (janus), openh323 V1.13.5 (janus) and oh323-0.6.0 Here are my config's ############## # modem.conf # ##############

I'm trying to connect an asterisk server via oh323 to a Lucent iMerge. I patched the code due so that Lucent can handle asterisk's ver4 h323 http://www.voip-info.org/wiki-Asterisk+Lucent+iMerge+Configuration I can now successfully dial in to our company over multiple lines. The issue is when I dial out The first outgoing call connects to an outside user A The second call drops the first

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Dear Mailinglist-User currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323 and ISDN-Capabilities. SIP and ISDN works fine, but H.323 not. In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper with the "chan_oh323" (version 0.6.5). We successfully tested in/egress calls without any problems. But when we started to connect our Asterisk

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi, ALL: I install my oh323 channel driver following steps of http://www.oinko.net/astrecipes/index.php?action=artikel&cat=270174&id=10&artlang=en I works my asterisk well before install the chan_oh323.so. But after I do "make install" the oh_323, my asterisk crash and show me the following message (asterisk -vvvvvvc). Does anyone have any idea about it? What's wrong

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi, I am working on a H.323 project which involves GnuGk and Asterisk My current goal is to provide IVR functionality for the H.323 users which register through GnuGk(eg. call credit information) I have successfully built a H.323 platform using GnuGk - it uses SQL accounting and authorisation. Now I am trying to integrate it with Asterisk in order to provide IVR functionality as I already

I wonder if anyone can help me? Am trying to terminate to H323 Vegastream. I'm using OH323 with little success. I can dial out and answer but voip end just keepings ringing and ringing. Thanks for any help. Neil Config file: [general] listenAddress=ALL listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=no h245Tunnelling=no h245inSetup=no jitterMax=100

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hi Every time I hangup on my AGI script Asterisk crashes if it is not running in console mode. (happens when using python and perl AGI scripts) I'm desparatly trying to get my employer to let me use Asterisk. So I must get this to work. I've posted about this before, I'm sorry, but I'm desperate. I'm running RedHat 9.0 (kernel 2.4.20-8 everything else updated) I'm

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

Hello all, It's me again. I would like play with calls between a H.323 client and a SIP client through * inside my LAN. For that, on host 192.168.1.20, I use GnomeMeeting (GM20) and Asterisk; on host 192.168.1.25, I use SJphone (SJ25) as SIP client on Windows and I register into * with a username, no password. The 3 files oh323.conf, sip.conf, extensions.conf are in attachment. In the same